FURSUN 24" Fluted Nightstand with Charging Station Instruction Manual

1. Introduction

Thank you for choosing the FURSUN 24" Fluted Nightstand with Charging Station. This manual provides essential information for the safe assembly, operation, and maintenance of your new furniture. Please read these instructions carefully before beginning assembly and retain them for future reference.

Image 1.1: The FURSUN 24" Fluted Nightstand in Natural Oak.

2. Safety Information

WARNING: Failure to follow these safety instructions may result in injury or damage to the product.

• Always assemble and install the table according to the provided instructions.
• Do not overload the table; the maximum recommended weight for the top surface is 80 pounds. Each drawer can hold up to 33 pounds.
• Ensure the table is properly anchored to prevent tipping or collapse, especially if children or pets are present. An anti-tipping device is included for this purpose.
• Keep all small parts and packaging materials away from children during assembly to prevent choking hazards.
• Do not use abrasive cleaners or harsh chemicals on the furniture surface.
• Ensure all electrical connections for the charging station are secure and follow local electrical codes.

3. Package Contents

Before beginning assembly, verify that all components listed below are present and undamaged. If any parts are missing or damaged, please contact customer support.

• All wooden panels (labeled for easy identification)
• Hardware kit (screws, dowels, drawer slides, handles)
• Charging Station unit with power cord
• Assembly Guide
• Installation Tool (screwdriver may be included, but a power drill is recommended for faster assembly)
• Anti-tipping device

4. Setup and Assembly

Assembly typically requires two adults and takes approximately 40-50 minutes. Using a power drill can significantly reduce assembly time. Follow the step-by-step instructions provided in the included Assembly Guide.

Required Tools:

• Screwdriver (or power drill for efficiency)

Assembly Steps (General Overview):

1. Unpack and Organize: Carefully unpack all components and lay them out on a clean, soft surface to prevent scratches. Identify each part using the labels.
2. Attach Drawer Slides: Secure the drawer slides to the side panels of the nightstand and the drawer boxes as per the instructions.
3. Assemble the Frame: Connect the main panels of the nightstand using the provided hardware (dowels, screws). Ensure all connections are tight and secure.
4. Assemble Drawers: Construct the two drawers, ensuring the fluted panels are correctly oriented. Attach the metal handles.
5. Install Charging Station: Insert the charging station unit into the designated slot on the top panel and secure it.
6. Insert Drawers: Carefully slide the assembled drawers into the installed drawer slides.
7. Install Anti-Tipping Device: For safety, attach the anti-tipping device to the back of the nightstand and secure it to a wall stud.

Image 4.1: Visual representation of the nightstand's assembly process.

5. Operating Instructions

5.1. Charging Station

The integrated charging station is located on the top surface of the nightstand for convenient access. It features:

• 2 AC Outlets (125V/12A)
• 2 USB Ports (5V/2.1A)

To use, simply plug the nightstand's main power cord into a wall outlet. You can then connect your electronic devices (phones, tablets, lamps, diffusers) to the AC outlets or USB ports for charging or power.

Image 5.1: The integrated charging station with AC and USB ports.

5.2. Drawer Usage

The nightstand features two smooth-gliding drawers designed for ample storage. Each drawer is equipped with metal handles and built-in slide rails for easy opening and closing.

• To open: Gently pull the handle.
• To close: Push the drawer firmly until it is fully recessed.

The drawers are suitable for storing various items such as books, watches, iPads, headphones, glasses, and jewelry, helping to keep your space organized.

Image 5.2: Drawers offering large capacity storage for personal items.

6. Maintenance

• Cleaning: Wipe surfaces with a soft, damp cloth. Avoid using harsh chemicals or abrasive cleaners, which can damage the finish.
• Spills: Clean up spills immediately to prevent staining or damage to the engineered wood.
• Weight Distribution: Distribute weight evenly on the top surface and within the drawers to maintain stability and prevent warping.
• Regular Checks: Periodically check all screws and connections to ensure they remain tight. Tighten if necessary.

7. Troubleshooting

• Wobbly Nightstand: Ensure all screws are tightened. Check that the nightstand is on a level surface. Adjust furniture levelers if applicable.
• Drawers Not Sliding Smoothly: Check that the drawer slides are correctly installed and free of obstructions. Ensure drawers are not overloaded.
• Charging Station Not Working: Verify the nightstand's main power cord is securely plugged into a functional wall outlet. Check the connections of your devices to the charging station.
• Missing Parts: If any parts were missing upon delivery, refer to the contact information in the Support section.

8. Specifications

Image 7.1: Product dimensions and weight recommendations.

9. Warranty and Support

For any questions, concerns, or assistance with your FURSUN nightstand, please contact our customer support team. While specific warranty details are not provided in this manual, we are committed to providing satisfactory solutions within 24 hours for any product-related inquiries.

Please refer to your purchase documentation or the FURSUN brand store on Amazon for the most up-to-date warranty information and contact methods.