IGRL Portable Shower User Manual

Introduction

Thank you for choosing the IGRL Portable Shower. This device is designed for versatility and convenience, ideal for outdoor activities such as camping, hiking, and travel, as well as for pet bathing, car washing, and watering plants. It features an 8000mAh rechargeable battery, IPX8 waterproofing, a smart LED display, and four adjustable spray modes.

The upgraded 8000mAh battery provides up to 180 minutes of continuous use and supports multiple charging methods via its Type-C port, including cell phone adapters, mobile power banks, laptops, and car USB. The charging port is equipped with a silicone waterproof cover for safe operation.

With a maximum water flow of 6L/min and five adjustable pressure levels, you can customize the water intensity to suit various needs. The smart LED display offers real-time monitoring of both battery level and water temperature, ensuring a safer and more convenient experience by preventing unexpected power loss or overheating.

The portable shower head offers four distinct spray modes: Soft, General, Power, and Spray Gun (requires removing the shower head), allowing for adaptability in different situations. Its lightweight design and included mesh storage bag make it easy to transport for all your outdoor adventures.

What's in the Box

Please ensure all components are present upon unboxing:

• Shower head
• Water pipe
• Water pump
• Mesh bag
• 3-in-1 Hook
• Bath sponge
• Type-C charging cable

Setup Instructions

1. Charge the Device: Before first use, fully charge the portable shower pump using the provided Type-C charging cable. Ensure the silicone waterproof cover on the charging port is securely closed during use.
2. Close Charging Port: Always ensure the charging port cover is tightly sealed before submerging the pump in water.
3. Attach Shower Head: Connect the shower head to the water pipe, ensuring the O-ring gasket is properly seated for a secure, leak-free connection.
4. Connect Water Pipe: Plug the other end of the water pipe into the hose connector on the pump unit.
5. Submerge Pump: Place the water pump completely into a water source (e.g., bucket, tub, cooler). Ensure the water level is sufficient to cover the pump.
6. Power On: Long press the power button on the pump unit to turn it on. The LED display will activate, showing battery level and water temperature.
7. Adjust Water Flow: Push the switch on the shower head and rotate the knob to adjust the water flow and select your desired spray mode.

Operating Instructions

LED Digital Display

The smart LED screen provides crucial information:

• Temperature-Color Indicator Light: Changes color based on water temperature (Blue: <35°C/95°F, Green: 35-45°C/95-113°F, Red: >45°C/113°F).
• Battery Level Display: Shows the remaining battery percentage.
• Fahrenheit Display: Indicates water temperature in Fahrenheit.
• Gear Display: Shows the current water pressure level (1-5).
• Increase/Reduce Water Pressure: Use the '+' and '-' buttons to adjust the water pressure.
• ON/OFF Button: Press and hold to power the unit on or off.

4 Spray Modes

The shower head features a rotary switch to select between four distinct spray modes:

• Soft Mode: Gentle water flow, suitable for sensitive areas or light rinsing.
• General Mode: Standard water flow for everyday showering or cleaning.
• Power Mode: Stronger water flow for effective cleaning of stubborn dirt.
• Spray Gun Mode: Achieved by removing the shower head, providing a concentrated stream for targeted cleaning.

Maintenance

• Cleaning: After each use, rinse the pump and shower head with clean water to remove any debris or soap residue.
• Drying: Ensure all components are thoroughly dried before storing to prevent mold or mildew growth.
• Charging Port: Always keep the silicone cover over the Type-C charging port when not charging to maintain its IPX8 waterproof rating.
• Storage: Store the portable shower in the provided mesh bag in a cool, dry place away from direct sunlight.
• Battery Care: For optimal battery life, avoid completely draining the battery frequently. Recharge it regularly, especially if storing for extended periods.

Troubleshooting

• Pump Not Turning On: Ensure the battery is sufficiently charged. If the battery is low, connect the Type-C charging cable and allow it to charge for 3-5 hours. A long press (2-3 seconds) of the power button is required to activate the pump.
• No Water Flow: Check that the pump is fully submerged in the water source. Ensure the water pipe and shower head connections are secure and not kinked. Verify the battery has sufficient charge.
• Weak Water Pressure: Check the gear display on the LED screen and use the '+' button to increase the water pressure. Ensure the water source is clean and free of debris that might clog the pump filter.
• Inaccurate Temperature Display: The temperature display activates when the pump is running. If the reading seems incorrect, ensure the pump has been submerged for a few moments to allow the sensor to acclimate to the water temperature.
• Charging Issues: Ensure you are using the provided Type-C cable and a compatible power source (e.g., phone charger, power bank, laptop USB). Avoid using high-power computer ports or other charging heads not specified for this device.

Specifications

Warranty and Support

The IGRL Portable Shower Model A2501 comes with a 1-year manufacturer's warranty. This warranty covers defects in materials and workmanship under normal use. It does not cover damage caused by misuse, accidents, unauthorized modifications, or improper maintenance.

For warranty claims, technical support, or any questions regarding your product, please contact the manufacturer directly. Refer to the product packaging or the official IGRL website for the most current contact information.

When contacting support, please have your model number (A2501) and proof of purchase readily available to expedite the process.