Product Overview
The Igloo Trailmate 52Qt Wheeled Cooler is designed for robust outdoor use, offering extended ice retention and convenient portability. Its sturdy construction and thoughtful features make it ideal for various outdoor activities.
Key Features:
- Superior Traction Wheels: Equipped with 10-inch, never-flat, smooth-ride wheels for tackling sand and challenging terrain.
- Extended Ice Retention: Features extra-thick 1.5-inch foam-insulated walls and an insulated lid.
- Secure Closure: Sure-Lock rubber latches provide a secure closure to lock in the cold.
- Convenient Features: Includes integrated bottle openers, a lockable lid (lock not included), and cup holders.
- Durable Construction: Made in the USA with a robust hard shell design.
Figure 1: Front view of the Igloo Trailmate 52Qt Wheeled Cooler with its telescoping handle extended, showcasing its robust design and wheels.
Setup and Initial Use
Before your first use, ensure all components are present and in good condition. The cooler is ready for use directly out of the packaging.
Unpacking and Inspection:
- Remove the cooler from its packaging.
- Inspect the cooler for any signs of damage during transit.
- Verify the presence of all listed components: 2 bottle openers, 1 lockable lid, 1 drain plug, 2 cup holders, 2 wheels, and 1 handle.
Pre-Chilling (Recommended):
For optimal ice retention, it is recommended to pre-chill the cooler before loading it with contents. Place a bag of ice or ice packs inside the cooler for several hours prior to your trip. This lowers the internal temperature of the cooler walls, reducing ice melt once your main contents are added.
Figure 2: Front view of the cooler, highlighting the Igloo branding and the secure latch system.
Operating Instructions
Loading Contents:
- Place items that need to stay coldest at the bottom.
- Fill any empty spaces with ice, ice packs, or crumpled newspaper to minimize air pockets and improve insulation.
- Ensure the lid gasket is clean and free of debris for a tight seal.
Securing the Lid:
The cooler features Sure-Lock rubber latches. To secure the lid, pull the rubber latches down and hook them onto the corresponding posts on the cooler body. Ensure both latches are firmly engaged to maintain the insulated seal.
Figure 3: Detail of the Sure-Lock rubber latch, designed for easy and secure fastening.
Using the Wheels and Handle:
Extend the telescoping handle by pressing the release button and pulling upwards. The 10-inch never-flat wheels provide excellent ground clearance and traction, making it easy to pull the cooler over various terrains, including sand and uneven surfaces. When not in use, retract the handle for compact storage.
Figure 4: Side view illustrating the large, durable wheels and the extended telescoping handle for easy transport.
Draining Water:
The cooler is equipped with a drain plug for easy water removal. Simply unscrew the cap to drain melted ice. Ensure the cooler is tilted slightly towards the drain for complete emptying.
Figure 5: Underside view of the cooler, highlighting the convenient drain plug for easy water removal.
Using the Bottle Openers and Cup Holders:
Two integrated bottle openers are located on the cooler for convenience. The lid also features four molded cup holders to keep your beverages secure.
Figure 6: A person demonstrating the use of the integrated bottle opener on the side of the cooler.
Figure 7: Top view of the cooler lid, showing the four integrated cup holders for beverage stability.
Maintenance
Cleaning:
- After each use, empty all contents and drain any remaining water.
- Wipe the interior and exterior surfaces with a mild soap and water solution.
- Rinse thoroughly with clean water.
- Allow the cooler to air dry completely with the lid open to prevent mold and mildew growth.
- For stubborn stains or odors, a solution of baking soda and water can be used.
Storage:
Store the cooler in a cool, dry place away from direct sunlight. It is recommended to store the cooler with the lid slightly ajar to allow for air circulation and prevent odors.
Troubleshooting
| Problem | Possible Cause | Solution |
|---|---|---|
| Poor Ice Retention | Lid not sealed properly; insufficient ice; cooler not pre-chilled; frequent opening. | Ensure latches are secure and gasket is clean. Use adequate ice. Pre-chill cooler. Minimize lid openings. |
| Difficulty with Latches | Debris in latch mechanism; rubber latches are stiff. | Clean latches. Apply a small amount of silicone lubricant to rubber if stiff. |
| Drain Plug Leaking | Plug not tightened; damaged O-ring. | Ensure drain plug is securely tightened. Inspect O-ring for damage and replace if necessary. |
| Handle Sticks | Dirt or debris in telescoping mechanism. | Clean the telescoping handle mechanism. Apply a small amount of silicone spray if needed. |
Specifications
- Brand: Igloo
- Model Name: Trailmate 52 Roller
- Capacity: 52 Quarts (approx. 49 Liters)
- Color: Blue
- Material: Plastic (Insulation: Foam)
- Product Dimensions: 25.62"D x 20.26"W x 16.7"H
- Item Weight: 19.9 Pounds
- Special Features: Portable, Wheeled, Insulated
- Included Components: 2 bottle openers, 1 lockable lid, 1 drain plug, 2 cup holders, 2 wheels, 1 handle
- Country of Origin: USA
Official Product Videos
No official product videos from the seller are available for this product at this time.
Warranty and Support
For information regarding product warranty, returns, or technical support, please refer to the manufacturer's official website or contact their customer service department. Keep your purchase receipt as proof of purchase for any warranty claims.
