SHEHDS SH-NPOWW1818F-BPUS
SHEHDS Stage Wash Lights Bar, 18x18W RGBWA+UV, Modular Linking LED Wall Washer Light
Model: SH-NPOWW1818F-BPUS
Introduction
This manual provides comprehensive instructions for the safe and efficient operation of your SHEHDS Stage Wash Lights Bar. Please read this manual thoroughly before installation and use, and retain it for future reference. This LED wall washer light features 18x18W RGBWA+UV LEDs, modular linking capabilities, and various control modes for dynamic stage lighting.
Safety Information
Always observe the following safety precautions to prevent electric shock, fire, or injury:
- Ensure the power supply voltage matches the product's requirements.
- Do not open the housing; there are no user-serviceable parts inside.
- Keep the device away from moisture, excessive heat, and direct sunlight.
- Always disconnect from power before cleaning or maintenance.
- Ensure proper ventilation to prevent overheating.
- Avoid direct eye exposure to the light source.
- Use safety cables when hanging the fixture.
Package Contents
Verify that all items are present upon unpacking:
- SHEHDS Stage Wash Lights Bar (1 unit)
- 1.2m Power Cable (EU/US/AU/UK compatible)
- 1.0m DMX Cable
- User Manual
- Installation Screws and Tools (e.g., Allen wrench)
- Hanging Tripod (mounting brackets)
- Tripod Screws
Image: Contents of the product package, including the light bar, power cable, DMX cable, user manual, installation screws and tools, hanging tripod brackets, and tripod screws.
Product Overview
The SHEHDS Stage Wash Lights Bar is designed for versatile stage and event lighting. Key features include:
- Modular Linking: Supports horizontal and vertical connections for custom stage designs.
- LED Light Source: 18 high-power 18W RGBWA+UV LEDs for a wide color spectrum.
- Ceramic Substrate LEDs: Offers high temperature, oxidation, and corrosion resistance for stability and longevity.
- PMMA Acrylic Lens: Custom lens with 98% reflectance for enhanced lighting efficiency and uniform color mixing.
- Automatic Modes: Built-in automatic light effect combinations and strobe effects.
- Heat Dissipation: Integrated fan for efficient thermal management.
- Control Panel: 1.8-inch touchscreen for intuitive parameter adjustments.
Image: Front view of the SHEHDS Stage Wash Lights Bar, showcasing its array of LED lights.
Image: Side view of the SHEHDS Stage Wash Lights Bar with dimensions indicated: 100cm (39.37 inches) length, 8cm (3.14 inches) width, and 9.5cm (3.74 inches) height.
Setup
Mounting the Light Bar
- Attach the provided hanging tripod brackets to the light bar using the installation screws and tools.
- Ensure all screws are securely tightened.
- For suspended installations, always use a safety cable through the designated safety rope hole position to prevent accidental drops.
- For floor standing, ensure the tripod brackets provide stable support.
Image: The light bar shown with its mounting brackets, illustrating how it can be positioned.
Modular Linking
The light bar supports both horizontal and vertical linking. Use the limit hole design to prevent displacement and twisting when connecting multiple fixtures.
Image: Close-up of the modular linking mechanism, showing the limit hole design for secure connections between multiple light bars.
Power and DMX Connection
- Connect the power cable to the power input on the light bar and then to a suitable power outlet.
- For DMX control, connect the DMX cable from your DMX controller to the DMX IN port on the first light bar. For multiple units, daisy-chain them by connecting the DMX OUT of one unit to the DMX IN of the next.
Operating Instructions
Control Panel
The 1.8-inch touchscreen menu panel allows for easy adjustment of lighting parameters. Use the MENU, ENTER, UP, and DOWN buttons to navigate and select options.
Image: Close-up of the 1.8-inch touchscreen menu panel with navigation buttons (MENU, ENTER, UP, DOWN) for adjusting settings.
DMX Address Setting
After setting the DMX address via the control panel, press the OK key. The original DMX address will be retained even after powering off and restarting the device.
Operating Modes
- DMX Control Mode: Connect to a DMX controller to access advanced lighting programming and effects.
- Automatic Mode: Utilize built-in programs for various color changes, fades, and strobe effects.
- Sound-Activated Mode: The light bar responds to music or sound, creating dynamic effects.
- Static Color Mode: Select a single color from the RGBWA+UV spectrum.
Image: The light bar projecting a solid red color onto a stage floor.
Image: The light bar projecting a solid green color onto a stage floor.
Image: The light bar projecting a solid blue color onto a stage floor.
Image: The light bar projecting a purple UV light onto a stage floor.
Image: A stage setup with multiple SHEHDS light bars creating a vibrant wall of colored light, including red, green, blue, white, amber, and violet.
Image: A stage performance featuring a musician, with the SHEHDS light bars creating a dynamic and colorful background wash effect.
Beam Angle Coverage
The fixture provides a maximum 25° beam angle coverage, designed to illuminate wider areas with natural and comfortable lighting.
Image: A graphic illustrating the 25-degree beam angle coverage of the light, with a dancer in the illuminated area.
Maintenance
- Cleaning: Regularly clean the lens and exterior with a soft, dry cloth. Do not use abrasive cleaners or solvents.
- Ventilation: Ensure the fan and ventilation openings are free from dust and debris to maintain efficient heat dissipation.
- Inspection: Periodically check all cables and connections for wear or damage.
- Storage: When not in use, store the light bar in a dry, dust-free environment.
Troubleshooting
| Problem | Possible Cause | Solution |
|---|---|---|
| Light does not turn on | No power, faulty cable, internal issue | Check power connection, test with another cable, contact support if problem persists. |
| No DMX control | Incorrect DMX address, faulty DMX cable, DMX controller issue | Verify DMX address setting, check DMX cable connections, ensure DMX controller is functioning correctly. |
| Overheating | Blocked ventilation, prolonged use in high ambient temperature | Ensure clear airflow around the unit, reduce operating time, operate in a cooler environment. |
Specifications
| Feature | Detail |
|---|---|
| Model Number | SH-NPOWW1818F-BPUS |
| Light Source | 18x18W RGBWA+UV LEDs |
| Color Spectrum | RGBWA+UV (Red, Green, Blue, White, Amber, Ultraviolet) |
| Material | Aluminum housing, Acrylic shade |
| Finish Type | Powder Coated |
| Product Dimensions | 3.15"L x 3.74"W x 39.37"H (8cm x 9.5cm x 100cm) |
| Item Weight | 14.92 pounds (6.77 kg) |
| Power Source | Corded Electric |
| Mounting Type | Wall Mount (with included brackets) |
| Beam Angle | Max 25 degrees |
Official Product Video
Video: A demonstration of the SHEHDS Stage Wash Lights Bar in a stage setting, showcasing various color changes, strobe effects, and laser patterns. This video highlights the dynamic capabilities of the lighting fixture.
Warranty and Support
SHEHDS offers the following support for this product:
- 1 Month Replacement: For initial defects or issues.
- 1 Year Warranty: Covers manufacturing defects for one year from the date of purchase.
- Customer Service: Instant customer service is available for inquiries and assistance.
For additional protection, 3-Year and 4-Year Protection Plans are available for purchase separately.
Ask a question about this manual
Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.