1. Introduction
This manual provides essential information for the installation, operation, and maintenance of your PowMr 6500W Hybrid Solar Inverter. Please read this manual thoroughly before installation and operation to ensure proper use and safety. This inverter is designed to convert 48V DC power to 110V/240V AC, featuring a 140A MPPT controller and supporting up to 6 units in parallel for a maximum combined output of 39kW.
2. Safety Information
- Qualified Personnel: Installation and maintenance must be performed by qualified personnel only.
- Electrical Hazard: This device operates with high voltages. Do not attempt to open or repair the unit unless specifically instructed.
- Proper Grounding: Ensure the inverter is properly grounded before connecting any power sources.
- Battery Safety: Always connect batteries with correct polarity. Wear protective gear when working with batteries.
- Ventilation: Ensure adequate ventilation around the inverter to prevent overheating.
- Indoor Use Only: This product is designed for indoor use. Do not expose it to rain, snow, or excessive moisture.
3. Product Overview
The PowMr 6500W Hybrid Solar Inverter is an all-in-one solution for solar power systems, offering robust performance and versatile functionality.

Figure 3.1: Front view of the PowMr 6500W Hybrid Solar Inverter, showcasing the display and control buttons.

Figure 3.2: Overview of key features including 6.5KW AC output, 140A max AC charging, split/single-phase support, battery compatibility, and parallel operation.
3.1. Key Features
- Split-phase and Single-phase Output: Provides both 120V and 240V AC output.
- High Power Output: 6500W continuous rated output, with a surge capacity of 13000W.
- Integrated MPPT Controller: Built-in 140A (70*2) MPPT solar charge controller.
- Dual PV Input: Supports two independent photovoltaic arrays with a maximum PV input power of 10kW (5000W * 2).
- Parallel Capability: Up to 6 units can be connected in parallel for a total capacity of 39kW.
- Flexible Charging Modes: Four selectable battery charging modes (Solar Only, Utility Priority, Solar Priority, Utility & Solar Hybrid).
- Multiple Output Modes: Two output working modes (Mains Bypass Output, Inverter Output).
- Wide Battery Compatibility: Works with 48V lead-acid (Seal, AGM, Gel, Flooded) and lithium batteries, also supports batteryless operation.
- Comprehensive Protection: Includes short circuit, over-current, over/under voltage, overload, and backfeed protection.
3.2. Component Identification

Figure 3.3: Detailed diagram of the inverter's ports and connections, including LCD screen, physical buttons, LED indicator, ON/OFF rocker switch, PV input, battery ports, dry contact, RS485/CAN port, WiFi port, USB-B port, CT, grounding screw, AC output, AC input, generator port, and parallel communication port.
3.3. Unboxing the Inverter
Video 3.1: An unboxing video demonstrating the contents of the PowMr SunSmart 6.5KP Solar Inverter package, including the inverter unit, user manual, warranty card, screw accessories, battery terminals, and parallel communication cable.
Video 3.2: A brief video showcasing the physical appearance and various angles of the PowMr 6500W Hybrid Solar Inverter.
4. Setup and Installation
Proper installation is crucial for the safe and efficient operation of your inverter. Follow these steps carefully.
4.1. Wiring Guide
Video 4.1: A step-by-step wiring guide for the PowMr 6500W Solar Inverter, demonstrating how to connect the battery, AC power source, AC loads, and photovoltaic arrays.
4.2. Connection Diagrams

Figure 4.1: Diagram illustrating the split-phase (120V/240V) and single-phase (120V) output configurations of the inverter.

Figure 4.2: A detailed split-phase connection diagram showing PV input, mains/generator input, AC output, and battery connections.
4.3. Parallel Operation
The inverter supports parallel operation for increased power output. Up to 6 units can be connected.

Figure 4.3: Diagrams illustrating parallel connections for two, three, and six solar storage inverters to expand system capacity.
5. Operating Instructions
5.1. Charging Modes
The inverter offers four selectable battery charging modes:
- Solar Only: Batteries are charged exclusively by solar power.
- Utility Priority: Utility power is the primary source for charging, with solar as a backup.
- Solar Priority: Solar power is the primary source for charging, with utility as a backup.
- Utility & Solar Hybrid: Both utility and solar power are used to charge batteries.
5.2. Output Modes
Two output working modes are available:
- Mains Bypass Output: Loads are powered directly by the utility grid.
- Inverter Output: Loads are powered by the inverter, drawing from solar or battery power.
5.3. Battery Compatibility
The inverter is compatible with various 48V battery types:
- Lead-acid batteries (Seal, AGM, Gel, Flooded)
- Lithium batteries
- Supports batteryless operation.

Figure 5.1: Visual representation of the inverter's compatibility with various battery types including AGM, GEL, FLD, and LI.
6. Maintenance
- Regular Inspection: Periodically check all connections for tightness and signs of corrosion.
- Cleaning: Keep the inverter's ventilation openings clear of dust and debris to ensure proper airflow. Use a dry cloth for cleaning the exterior.
- Battery Health: Monitor battery voltage and charge levels regularly. Follow battery manufacturer guidelines for maintenance.
- Environmental Conditions: Ensure the inverter is operating within its specified temperature and humidity ranges.
7. Troubleshooting
This section provides solutions for common issues. For complex problems, contact customer support.
| Problem | Possible Cause | Solution |
|---|---|---|
| Inverter not turning on | No battery connection, low battery voltage, AC input breaker off. | Check battery connections, ensure battery voltage is sufficient, turn on AC input breaker. |
| No AC output | Overload, short circuit, inverter fault. | Reduce load, check for short circuits, restart inverter. If issue persists, contact support. |
| PV input not detected | PV array not connected, low PV voltage, PV breaker off. | Check PV connections, ensure sufficient sunlight, turn on PV breaker. |
| Battery not charging | Incorrect charging mode, PV input issue, battery fault. | Verify charging mode settings, check PV input, inspect battery health. |
8. Technical Specifications
| Feature | Specification |
|---|---|
| Model Name | POW-SunSmart 6.5KP |
| Inverter Type | Hybrid Solar Inverter |
| Rated Output Power | 6500W (continuous) |
| Surge Power | 13000W |
| Rated Output Voltage | 120/240Vac (Split-phase & Single-phase) |
| Frequency | 50/60Hz |
| Battery Voltage | 48V DC |
| MPPT Controller Current | 140A (70A * 2) |
| Max. PV Input Power | 10kW (5000W * 2) |
| Max. PV Input Voltage | 550Vdc |
| Max. PV Input Current | 18A |
| PV Starting Voltage | >150V |
| Parallel Support | Up to 6 units (max 39kW) |
| Communication | CAN, USB, RS485, WiFi |
| Product Dimensions | 15.9 x 5 x 22.6 inches |
| Item Weight | 19 pounds |
9. Warranty and Support
For warranty information, please refer to the warranty card included in your product packaging or contact PowMr customer support. For technical assistance, troubleshooting beyond this manual, or spare parts, please visit the official PowMr website or contact their authorized service centers.

Figure 9.1: Examples of application scenarios for the PowMr Hybrid Solar Inverter, including RVs and general solar power systems.