User Manual for XINFUTE RC923A FMB1 Smart TV Remote Control
Model: RC923A FMB1 | Brand: XINFUTE
Introduction
This manual provides detailed instructions for the XINFUTE RC923A FMB1 Smart LED Bluetooth Voice TV Remote Control. This remote is designed to be compatible with TCL Smart LED TVs, offering both Bluetooth and infrared connectivity for seamless control. It features voice control capabilities and dedicated shortcut buttons for popular streaming services.
The package includes one remote control unit. Batteries are not included.
Setup
1. Battery Installation
The XINFUTE RC923A FMB1 remote control requires two (2) AAA batteries for operation. Follow these steps to install the batteries:
- Locate the battery compartment on the back of the remote control.
- Press down on the latch and slide the battery cover downwards to open it.
- Insert two AAA batteries, ensuring the positive (+) and negative (-) terminals align correctly with the markings inside the compartment.
- Slide the battery cover back into place until it clicks securely.
Figure 1: Battery compartment of the remote control. Insert two AAA batteries as shown, observing polarity.
2. Initial Use
Once batteries are installed, the remote control is ready for use. No pairing is typically required for basic functions, as it operates via infrared. For voice control and advanced features, Bluetooth pairing might be necessary depending on your TV model. Refer to your TCL TV's user manual for specific Bluetooth pairing instructions if needed.
Operating Instructions
The XINFUTE RC923A FMB1 remote control provides comprehensive control over your compatible TCL Smart LED TV. Below are the primary functions:
Figure 2: Front view of the remote control with button layout.
- Power Button (⏻): Turns the TV on or off.
- Mute Button (🔇): Mutes or unmutes the TV sound.
- Navigation Pad (Up, Down, Left, Right, OK): Used to navigate menus and select options.
- Back Button (⮨): Returns to the previous screen or menu.
- Home Button (⌂): Accesses the TV's home screen or smart hub.
- Voice Assistant Button (🎤): Activates the voice control feature. Press and hold to speak commands.
- Volume Up/Down (+ / -): Adjusts the TV volume.
- Channel Up/Down (∧ / ∨): Changes TV channels.
- Input/Source Button (⎈): Selects input sources (HDMI, AV, etc.).
- Settings/Menu Button (☰): Opens the TV's settings or options menu.
- Number Pad (123): Accesses a virtual number pad for direct channel input or other numerical entries.
- Info Button (ⓘ): Displays information about the current program or content.
- Dedicated App Buttons: Direct access to popular streaming services such as Netflix, Prime Video, YouTube, Apple TV, TCL TV, and Disney+.
Voice Control
To use the voice control feature, press and hold the Voice Assistant button (🎤) and speak clearly into the remote's microphone. Release the button when you are finished speaking. Ensure your TV is connected to the internet and has voice assistant features enabled.
Maintenance
Cleaning the Remote
To clean the remote control, use a soft, dry cloth. For stubborn dirt, slightly dampen the cloth with water or a mild, non-abrasive cleaner. Do not use harsh chemicals or abrasive materials, as they may damage the remote's surface or internal components. Avoid getting moisture into the battery compartment or any openings.
Battery Replacement
Replace the batteries when the remote control's responsiveness decreases or it stops functioning. Always replace both AAA batteries at the same time with new ones. Dispose of used batteries according to local regulations.
Figure 3: Back view of the remote control, highlighting the battery compartment area.
Troubleshooting
- Remote not responding:
- Check if the batteries are inserted correctly with the correct polarity.
- Replace old batteries with new ones.
- Ensure there are no obstructions between the remote and the TV's infrared receiver.
- Point the remote directly at the TV.
- Voice control not working:
- Ensure the remote is properly paired with your TV via Bluetooth. Refer to your TV's manual for Bluetooth pairing instructions.
- Check if your TV is connected to the internet.
- Speak clearly and hold the voice button while speaking.
- Specific buttons not working:
- Clean the remote control, especially around the non-functioning buttons, to remove any dirt or debris.
- If only certain app buttons are not working, ensure your TV's smart features are updated and functioning correctly.
Specifications
| Feature | Detail |
|---|---|
| Model Number | RC923A FMB1 |
| Brand | XINFUTE |
| Product Dimensions | 6 x 3 x 1 inches |
| Item Weight | 2.82 ounces |
| Batteries Required | 2 x AAA (not included) |
| Material | ABS Material |
| Connectivity Technology | Bluetooth, Infrared |
| Special Features | Ergonomic, Voice Search |
| Compatible Devices | Television (specifically TCL Smart LED TVs) |
| Max Number of Supported Devices | 1 |
Warranty Information
XINFUTE offers a one-year warranty on all purchases of this remote control. This warranty covers manufacturing defects and ensures the product functions as intended under normal use.
For warranty claims or issues, please retain your proof of purchase. Contact customer support within 24 hours of receipt if you are not satisfied with your purchase.
Customer Support
If you encounter any problems or have questions regarding your XINFUTE RC923A FMB1 remote control that are not addressed in this manual, please contact XINFUTE customer support. Refer to the retailer's website or your purchase documentation for specific contact details.
For general inquiries or to explore other products, visit the XINFUTE Store on Amazon.
