Introduction
Thank you for choosing the InnovaGoods Retractable Blade Ceiling Fan with LED Light. This manual provides essential information for the safe and efficient installation, operation, and maintenance of your new ceiling fan. Please read these instructions carefully before use and retain them for future reference.
Safety Instructions
To ensure safe operation, always follow these basic safety precautions:
- Read all instructions thoroughly before attempting installation or operation.
- Installation must be performed by a qualified electrician in accordance with all local electrical codes.
- Always disconnect power at the main circuit breaker before installing, cleaning, or performing any maintenance on the fan.
- Ensure the ceiling structure is capable of supporting the fan's weight (approximately 4.38 kg).
- Do not insert fingers or any objects into the fan blades during operation.
- Keep children and pets away from the fan during operation.
- Use only the remote control provided with the fan.
- Do not expose the fan to water or excessive humidity.
- Ensure all connections are secure and properly insulated.
Product Components
Before beginning installation, verify that all components are present and undamaged:
- Ceiling Fan Unit (Motor, LED Light, Retractable Blades)
- Downrod
- Canopy
- Mounting Bracket
- Remote Control (requires 2x AAA batteries, not included)
- Screws and Mounting Hardware
- Instruction Manual
Image: Overview of all included components for the ceiling fan.
Setup and Installation
Follow these steps carefully for proper installation. Professional installation by a qualified electrician is recommended.
- Preparation: Turn off the electrical power at the main circuit breaker. Ensure the ceiling is structurally sound to support the fan.
- Mounting Bracket Installation: Secure the mounting bracket to a ceiling joist or an approved electrical junction box using the provided screws.
- Downrod Assembly: Feed the electrical wires from the fan motor through the downrod. Attach the downrod to the fan motor assembly, securing it with the provided pin and screws.
- Wiring Connections: Connect the fan's electrical wires to the household wiring. Typically, connect the green/yellow wire (Ground) to household ground, the blue wire (Neutral) to household neutral, and the brown/red wire (Live) to household live. Ensure the remote receiver unit is connected correctly between the household wiring and the fan wiring.
- Fan Unit Attachment: Carefully lift the fan assembly and hang it onto the mounting bracket. Secure the fan to the bracket with the designated screws.
- Canopy Installation: Slide the canopy upwards to cover the mounting bracket and all wiring connections. Secure the canopy in place.
- Final Check: Double-check all electrical connections for security and proper insulation. Ensure all screws are tightened. Restore power at the main circuit breaker.
Operating Instructions
Your InnovaGoods ceiling fan is controlled via the included remote control. Ensure 2 AAA batteries (not included) are inserted into the remote control before use.
Image: The ceiling fan and its remote control.
Fan Functions:
- Power On/Off: Press the ON/OFF button to turn the fan on or off.
- Speed Control: Use the speed buttons (1-6) to select your desired fan speed. The fan offers 6 different speeds for optimal comfort.
- Summer/Winter Mode: Press the Summer/Winter button to change the direction of blade rotation. In summer, blades rotate counter-clockwise to create a downward airflow for cooling. In winter, blades rotate clockwise to create an upward airflow, circulating warm air trapped near the ceiling.
- Timer: Press the Timer button (1H, 2H, 4H) to set the fan to automatically turn off after 1, 2, or 4 hours.
Image: Visual representation of summer (downward airflow) and winter (upward airflow) modes.
Light Functions:
- Light On/Off: Press the Light button to turn the LED light on or off.
- Light Color Temperature: Press the Light Color button to cycle through the 3 available light modes: cold white (6500K), warm white (3500K), and neutral white (4300K).
Image: The three adjustable light color temperatures.
Retractable Blades:
The fan features 4 retractable blades that fold discreetly when the fan is not in use, transforming it into a sleek ceiling lamp. When the fan is activated, the blades extend automatically.
Image: The retractable blades in motion, extending and retracting.
Maintenance
Regular maintenance ensures optimal performance and longevity of your ceiling fan.
- Cleaning: Always disconnect power before cleaning. Use a soft, damp cloth to wipe down the fan and light. Avoid abrasive cleaners, solvents, or harsh chemicals that could damage the finish.
- Blade Inspection: Periodically check that all fan blades are securely attached and free from damage.
- Dust Removal: Use a soft brush or a vacuum cleaner with a brush attachment to remove dust from the motor housing and blades.
Troubleshooting
If you encounter any issues with your fan, refer to the following common problems and solutions:
- Fan does not turn on:
- Check if the power supply is connected and the circuit breaker is on.
- Ensure the remote control batteries are correctly inserted and functional.
- Verify all electrical connections are secure.
- Light does not turn on:
- Confirm the power supply is active.
- Check the light connections within the fan unit.
- Ensure the light function is activated on the remote control.
- Fan wobbles:
- Ensure all mounting screws for the ceiling bracket and downrod are tight.
- Verify that the fan blades are securely attached.
- Remote control not working:
- Replace the batteries with new AAA batteries.
- Ensure there is a clear line of sight between the remote and the fan's receiver.
Specifications
| Feature | Specification |
|---|---|
| Brand | InnovaGoods |
| Model Number | 8435527827212 |
| Power (Fan) | 72 W |
| Power (LED Light) | 40 W |
| Voltage | 24 Volts |
| Motor Type | DC Motor |
| Number of Speeds | 6 |
| Max RPM | 230 RPM |
| Number of Blades | 4 (Retractable) |
| Light Type | LED (48 SMD LED) |
| Luminous Flux | 4000 lm |
| Light Color Temperatures | Cold (6500K), Warm (3500K), Neutral (4300K) |
| Timer Settings | 1, 2, 4 hours |
| Special Functions | Summer/Winter Mode |
| Control Method | Remote Control |
| Remote Control Batteries | 2 x AAA (not included) |
| Recommended Room Size | 10-25 m² |
| Product Dimensions | Ø49-104 cm (diameter), 42 cm (height) |
| Product Weight | 4.38 kg |
| Materials | ABS, Forged Iron, Polycarbonate |
| Energy Efficiency Class | E |
| Compliance | CE |
Image: Energy efficiency label for the product.
For more detailed product information, refer to the EPREL database: https://eprel.ec.europa.eu/qr/2163620
Warranty and Support
This InnovaGoods product comes with a standard manufacturer's warranty. For warranty claims, technical support, or any questions not covered in this manual, please contact InnovaGoods customer service through their official channels or the retailer where the product was purchased.
Please retain your proof of purchase for warranty purposes.
