Migali C-PP93-D-HC 93″ Pizza Prep Table with Drawers

Product Overview

The Migali C-PP93 pizza prep table is designed for efficient storage and preparation of pizza and sandwich ingredients. It features a robust forced air refrigeration system that ensures cold, uniform temperatures throughout the cabinet's interior and underneath the pan rail. This model includes a digital controller and temperature read-out for precise temperature management, enhanced energy efficiency, and superior performance.

Constructed with a high polished stainless steel exterior and interior, rounded door edges, and a recessed door handle, the C-PP93 offers both aesthetic appeal and ergonomic design. Its spacious 26 cubic feet interior comes standard with 3 adjustable shelves. An optional bun rack for 18″ x 26″ sheet pans or 12″ by 20″ hotel pans can also be accommodated within the interior cavity.

Figure 1: Front view of the Migali C-PP93-D-HC Pizza Prep Table, showing the top pan rail with various ingredients, a cutting board, and six storage drawers below.

Setup and Installation

1. Unpacking: Carefully remove the unit from its packaging. Inspect for any shipping damage. Report any damage immediately to the carrier and supplier.
2. Placement: Position the unit on a flat, level, and sturdy surface capable of supporting its weight when fully loaded. Ensure adequate clearance (at least 6 inches) around the back and sides for proper ventilation. Avoid direct sunlight or heat sources.
3. Leveling: The unit ships with wheels preinstalled. Use a level to ensure the unit is perfectly level. Adjust the leveling feet on the casters if necessary to prevent vibration and ensure proper door/drawer sealing.
4. Power Connection: Connect the unit to a dedicated grounded electrical outlet with the correct voltage and amperage as specified on the product's data plate. Do not use extension cords or adapter plugs.
5. Initial Cleaning: Before first use, clean the interior and exterior surfaces with a mild soap and water solution. Rinse thoroughly and dry.
6. Initial Startup: After connecting power, allow the unit to run for at least 2-4 hours empty to reach its operating temperature before loading with food products.

Operating Instructions

• Temperature Control: The unit is equipped with a digital temperature controller. Refer to the controller's specific manual for detailed programming instructions. The recommended operating temperature for food safety is typically between 33°F and 41°F (0.5°C and 5°C).
• Loading Product: Load food products into the drawers and top pan rail. Do not overload the unit, as this can restrict airflow and reduce cooling efficiency. Ensure proper air circulation around items.
• Pan Rail Usage: The top pan rail is designed to hold standard food pans for easy access during food preparation. Keep the pan rail cover closed when not in use to maintain temperature and hygiene.
• Drawer Operation: The drawers are designed for smooth operation. Avoid slamming drawers shut. Ensure they are fully closed to maintain internal temperature.
• Defrost Cycle: The unit features an automatic defrost cycle. Do not interfere with this cycle. Excessive ice buildup indicates a potential issue that requires attention.

Maintenance and Cleaning

Regular maintenance is crucial for the longevity and efficient operation of your Migali pizza prep table.

• Daily Cleaning:
  • Wipe down all interior and exterior stainless steel surfaces with a clean cloth and mild, non-abrasive cleaner.
  • Clean the cutting board surface thoroughly after each use.
  • Empty and clean the top food pans.
• Weekly Cleaning:
  • Remove all food products and shelves. Clean the entire interior with a sanitizing solution.
  • Inspect and clean door/drawer gaskets. Ensure they are free of food debris and are sealing properly.
• Monthly/Quarterly Maintenance:
  • Condenser Coil Cleaning: (Important: Disconnect power before cleaning.) The condenser coil, located at the back or bottom of the unit, can accumulate dust and debris, reducing efficiency. Use a stiff brush or vacuum cleaner to remove buildup. For heavily soiled coils, professional cleaning may be required.
  • Check the fan blades for cleanliness and proper operation.
  • Inspect electrical cords for damage.

Troubleshooting Guide

If problems persist after attempting these solutions, please contact a qualified service technician.

Product Specifications

Warranty Information

This Migali product is covered by a manufacturer's warranty. Please refer to the warranty card included with your purchase or visit the official Migali website for detailed terms and conditions regarding coverage, duration, and claims procedures. Keep your proof of purchase for warranty validation.

Customer Support

For technical assistance, parts, or service inquiries, please contact Migali customer support. Have your model number and serial number ready when contacting support to expedite assistance.

You can typically find contact information on the manufacturer's website or in the documentation provided with your unit.