1. Introduction
This manual provides essential information for the safe and efficient operation, installation, maintenance, and troubleshooting of your Migali C-SP60-16-D-HC 60-inch Sandwich Prep Table. Please read this manual thoroughly before operating the unit and retain it for future reference.
Figure 1: Front view of the Migali C-SP60-16-D-HC Sandwich Prep Table, showcasing its stainless steel construction and top ingredient pans.
2. Safety Information
Always follow basic safety precautions when using this appliance to reduce the risk of fire, electrical shock, or injury. This unit is designed for commercial use and should only be operated by trained personnel.
- Ensure the unit is properly grounded before use.
- Do not store explosive substances such as aerosol cans with a flammable propellant in this appliance.
- Keep ventilation openings in the appliance enclosure or in the built-in structure clear of obstruction.
- Do not use mechanical devices or other means to accelerate the defrosting process, other than those recommended by the manufacturer.
- Do not damage the refrigerant circuit.
- Only qualified service personnel should perform repairs.
Figure 2: The Migali Sandwich Prep Table displaying ETL Electrical, ETL Sanitation, and U.S. Department of Energy certifications, indicating compliance with safety and energy standards.
3. Setup and Installation
3.1 Unpacking
Carefully remove all packaging materials. Inspect the unit for any shipping damage. Report any damage immediately to the carrier and your dealer.
3.2 Placement
Place the unit on a level, sturdy surface. Ensure adequate clearance around the unit for proper ventilation. Avoid direct sunlight or proximity to heat-generating equipment. The unit ships with wheels preinstalled for convenient positioning.
Figure 3: Rear view of the Migali C-SP60-16-D-HC, illustrating the back panel and power connection area. Ensure proper ventilation around this area.
3.3 Electrical Connection
Connect the unit to a dedicated, grounded electrical outlet that matches the voltage and amperage requirements specified on the product label. Do not use extension cords.
4. Operating Instructions
4.1 Initial Startup
After connecting the power, turn on the unit using the main power switch. Allow the unit to run for several hours to reach its operating temperature before loading with food products.
4.2 Temperature Control
The unit features a digital temperature controller with a front-mounted keypad and display. The refrigerated section maintains temperatures between +33°F (+0.6°C) and +41°F (+5°C). Adjust the temperature as needed using the controls on the digital display.
Figure 4: Digital temperature controller, providing precise temperature management and display for the refrigerated section.
4.3 Food Pan Usage
The top section is designed to hold 16 food pans for ingredients. The integrated refrigerated rail utilizes forced air circulation to keep toppings and ingredients at safe temperatures. Ensure pans are properly seated to maintain optimal cooling.
Figure 5: Interior view of the top section, highlighting the fan system responsible for cold air circulation to maintain ingredient freshness.
4.4 Cutting Board
A 9¼-inch poly cutting board is included, providing a durable prep space for assembling sandwiches and salads. This surface is easy to clean and built for daily use.
4.5 Drawer Operation
The unit features drawer-style refrigeration for efficient prep lines. Drawers slide out smoothly for easy loading and unloading of food products, improving workflow and ingredient separation. This design minimizes the need to bend or dig deep for items.
Video 1: An official Migali video demonstrating the features and benefits of their refrigerated sandwich prep tables, including the drawer-style refrigeration and efficient prep line capabilities.
5. Maintenance
5.1 Cleaning
Regular cleaning is essential for hygiene and optimal performance. Clean the stainless steel exterior and interior with a mild detergent and warm water. Avoid abrasive cleaners or scouring pads that can scratch the surface. The insulated roll cover helps minimize moisture and condensation, reducing cleaning frequency.
5.2 Condenser Coil Cleaning
The condenser coil should be cleaned regularly (monthly or quarterly, depending on usage) to ensure efficient cooling. Dust and debris can accumulate, reducing performance and increasing energy consumption. Consult a qualified technician for proper cleaning procedures.
6. Troubleshooting
Before contacting service, review the following common issues and solutions:
| Problem | Possible Cause | Solution |
|---|---|---|
| Unit not cooling | Power supply issue, thermostat setting, dirty condenser coil, door/drawer not closed properly. | Check power connection, verify thermostat setting, clean condenser coil, ensure doors/drawers are sealed. |
| Excessive noise | Loose components, fan obstruction, unit not level. | Inspect for loose parts, clear fan area, level the unit. |
| Water on floor | Clogged drain line, excessive humidity. | Clear drain line, ensure proper pan placement and lid usage. |
If the issue persists after attempting these solutions, contact Migali customer support or a qualified service technician.
7. Specifications
The Migali C-SP60-16-D-HC is engineered for robust performance and energy efficiency, utilizing R290 refrigerant.
- Model Name: C-SP60-16-D-HC
- Product Dimensions (D x W x H): 30"D x 60.3"W x 44.3"H
- Capacity: 17.2 Cubic Feet
- Color: Stainless Steel
- Installation Type: Freestanding
- Number of Doors: 2 (with drawers)
- Defrost System Type: Automatic
- Power Source: Corded Electric
- Refrigerant: R290 (Hydrocarbon)
- Certifications: ETL, ETL Sanitation
- GTIN/UPC: 819296022241
7.1 R290 Refrigerant Benefits
- High Energy Efficiency: Excellent thermodynamic properties lead to lower energy consumption.
- Compliance & Future-Proofing: Ensures compliance with environmental regulations as synthetic refrigerants are phased out.
- Environmentally Friendly: Extremely low Global Warming Potential (GWP of only 3) and zero Ozone Depletion Potential (ODP).
- Superior Cooling Performance: Delivers strong, reliable cooling capacity with quick pull-down times.
8. Warranty and Support
8.1 Warranty Information
Your Migali C-SP60-16-D-HC Sandwich Prep Table comes with the following warranty:
- Compressor: 5-Year Warranty
- Parts & Labor: 2-Year Warranty
Please retain your proof of purchase for warranty claims. The warranty covers defects in materials and workmanship under normal use and service.
Figure 6: Warranty details for Migali products, highlighting the 5-year compressor and 2-year parts and labor coverage.
8.2 Customer Support
For technical assistance, service requests, or questions regarding your product, please contact Migali customer support. Refer to the official Migali website or your purchase documentation for contact details.