Fenge 2-Tier Wooden Monitor Stand Desk Shelf

1. Introduction

Thank you for choosing the Fenge 2-Tier Wooden Monitor Stand Desk Shelf. This product is designed to enhance your workspace organization and improve ergonomic posture. Please read this manual carefully before assembly and use to ensure proper installation and safe operation.

Image 1.1: The Fenge 2-Tier Wooden Monitor Stand supporting dual monitors and organizing desk items.

This monitor stand features a 2-tier design with a segmented upper shelf, allowing for categorized storage of various items. The lower tier provides space for peripherals such as keyboards and mice, helping to declutter your desk and expand your usable workspace. It is constructed from durable MDF wood with robust 20mm iron legs, ensuring stability even when supporting dual monitors. The stand elevates your monitor by approximately 13.7 cm, promoting a more natural neck and back posture to reduce strain.

2. Package Contents

Please verify that all components are present and undamaged before beginning assembly. If any parts are missing or damaged, please contact customer support.

• Top Shelf Panel (MDF)
• Bottom Shelf Panel (MDF)
• Side Support Legs (Iron, 20mm thickness)
• Connecting Hardware (Screws, dowels, etc.)
• Assembly Tool (Hex key, if required)
• Instruction Manual

3. Setup and Assembly

Assembly of the Fenge Monitor Stand is straightforward. Follow these steps carefully:

1. Unpack Components: Carefully remove all parts from the packaging and lay them out on a clean, soft surface to prevent scratches.
2. Identify Parts: Refer to the parts list to identify each component.
3. Attach Side Supports: Secure the iron side support legs to the bottom shelf panel using the provided screws. Ensure they are aligned correctly.
4. Install Top Shelf: Place the top shelf panel onto the side supports, aligning the pre-drilled holes. Secure it with the remaining screws.
5. Tighten All Connections: Once all parts are in place, gently tighten all screws to ensure stability. Do not overtighten.

Image 3.1: Detail of the iron leg and MDF board construction, illustrating the assembly points.

After assembly, place the stand on a flat, stable surface. Ensure it does not wobble before placing any devices on it.

4. Operating Instructions

The Fenge Monitor Stand is designed for versatile use to organize and elevate your devices.

• Monitor Placement: Place your monitor(s) on the top shelf. The stand is suitable for single or dual monitor setups.
• Peripheral Storage: Utilize the lower tier to store your keyboard, mouse, and other small peripherals when not in use, freeing up desk space.
• Accessory Organization: The segmented upper shelf allows for organized storage of pens, notebooks, external hard drives, or other desk accessories.
• Ergonomic Benefit: The stand elevates your monitor to a height that helps align your eye level, reducing strain on your neck and shoulders during prolonged use.

Image 4.1: Examples of the stand's versatile applications, including dual monitor, printer, and TV stand setups.

5. Maintenance

To ensure the longevity and appearance of your Fenge Monitor Stand, follow these maintenance guidelines:

• Cleaning: Wipe the surface with a soft, damp cloth. Avoid using harsh chemicals or abrasive cleaners, as they may damage the finish.
• Spills: The MDF material is resistant to water and dirt. In case of spills, wipe immediately with a dry cloth to prevent moisture absorption.
• Stability Check: Periodically check all screws and connections to ensure they remain tight. Retighten if necessary.
• Load Capacity: Do not exceed the maximum load capacity of 45 kg (99 lbs) to prevent damage or instability.

Image 5.1: Illustrates the durable MDF board and 20mm iron frame construction, highlighting the product's robust design.

6. Troubleshooting

If you encounter any issues with your monitor stand, refer to the following common troubleshooting tips:

• Wobbling Stand: Ensure all screws are securely tightened. Check that the stand is placed on a flat, even surface.
• Difficulty Assembling: Review the assembly instructions carefully. Ensure all parts are correctly oriented before tightening screws. Do not force components together.
• Damaged Parts: If any parts arrived damaged or become damaged during assembly, do not proceed with assembly. Contact customer support for replacement parts.

7. Specifications

Image 7.1: Detailed dimensions of the Fenge 2-Tier Monitor Stand.

8. Warranty and Support

Fenge products are manufactured with quality and durability in mind. For specific warranty information or if you require assistance with your product, please refer to the warranty card included in your package or contact Fenge customer support directly through the retailer's platform where the product was purchased. Please have your model number (G04F210) and purchase details ready when contacting support.