Macap MI20 Touch Instant Burr Coffee Grinder User Manual

Introduction

Thank you for choosing the Macap MI20 Touch Instant Burr Coffee Grinder. This manual provides essential information for the safe and efficient operation, maintenance, and troubleshooting of your new coffee grinder. Please read this manual thoroughly before first use and keep it for future reference.

Figure 1: Front view of the Macap MI20 Touch Coffee Grinder in black.

Important Safety Information

To reduce the risk of fire, electric shock, or injury, always follow basic safety precautions when using electrical appliances.

• Read all instructions before operating the appliance.
• Do not immerse the appliance, cord, or plug in water or other liquids.
• Unplug from outlet when not in use, before putting on or taking off parts, and before cleaning.
• Close supervision is necessary when any appliance is used by or near children.
• Avoid contact with moving parts.
• Do not operate any appliance with a damaged cord or plug, or after the appliance malfunctions or has been dropped or damaged in any manner.
• The use of attachments not recommended or sold by the manufacturer may cause fire, electric shock, or injury.
• Do not use outdoors.
• Do not let cord hang over edge of table or counter, or touch hot surfaces.
• Do not place on or near a hot gas or electric burner, or in a heated oven.

Product Overview and Key Features

The Macap MI20 Touch is a high-performance coffee grinder designed for precision and ease of use, featuring a modern design with a colored touchscreen interface.

Key Features:

• 3.5'' TOUCHSCREEN & LED LIGHT: Large display with 4 programmable doses and user-friendly interface. Built-in LED for visibility in low-light kitchens or cafés.
• MULTI-MODE GRINDING: Choose from Standard, Push and Grind, or Barista Hands-Free mode—tailored workflow for every espresso prep style.
• HANDS-FREE OPERATION: Insert portafilter and grinding begins automatically—ensures consistent dosing with minimal effort.
• STEPLESS ADJUSTMENT SYSTEM: Micrometric grind control with zero setting—dial in perfect texture for espresso, drip, moka pot, or cold brew.
• DURABLE, QUIET, CLEAN: 58mm flat burrs and anti-vibration fork ensure stable grinding. Quiet motor with low retention and mess-reducing design.
• HIGH-CAPACITY HOPPER: 500g bean hopper built for daily use in high-demand environments—ideal for home baristas or light commercial use.

Figure 2: Overview of the Macap MI20 Touch's main features, including 58mm flat burrs, 500g coffee hopper capacity, instant productivity of 2-2.6 g/s, and 300W motor power.

Figure 3: Close-up of the 3.5-inch colored touchscreen display, showing dose programming options.

Figure 4: Detail of the USB-C socket and the adjustable LED light for illuminating the working area.

Figure 5: View of the stepless grind adjustment ring, allowing for precise control over grind size.

Figure 6: Close-up of the 500g bean hopper, showing the internal design for efficient bean feeding.

Setup

Unpacking

1. Carefully remove the grinder and all accessories from the packaging.
2. Check for any signs of damage during transit. If damaged, contact your retailer immediately.
3. Retain the original packaging for future storage or shipping.

Initial Assembly

1. Place the grinder on a stable, flat, and dry surface.
2. Ensure the power switch is in the OFF position.
3. Attach the bean hopper to the top of the grinder by aligning the tabs and twisting until it locks securely in place.
4. Insert the removable tray into its designated slot at the base of the grinder.

Figure 7: Side view of the Macap MI20 Touch Coffee Grinder, showing the hopper and removable tray.

Operating Instructions

Filling the Hopper

Lift the hopper lid and pour fresh, whole coffee beans into the hopper. The hopper has a capacity of 500g. Close the lid securely after filling.

Adjusting Grind Size

The MI20 Touch features a stepless micrometric grind adjustment system. To adjust the grind size, rotate the grind adjustment ring located below the bean hopper. Turn clockwise for a finer grind and counter-clockwise for a coarser grind. Make small adjustments and test the grind to achieve your desired consistency.

Grinding Modes

The grinder offers three distinct grinding modes, selectable via the touchscreen:

• Standard Mode: Manually activate grinding for a set duration or until stopped.
• Push and Grind Mode: Grinding starts when the portafilter activates the button and stops when the portafilter is removed.
• Barista Hands-Free Mode: Grinding automatically starts when the portafilter is inserted and stops after dispensing the programmed dose.

Programming Doses

The 3.5-inch touchscreen allows for programming up to four different doses. Refer to the on-screen menu for detailed instructions on setting and saving your preferred dose quantities. The display also provides options for adjusting LED lighting intensity, customizing the interface, and viewing daily, weekly, and total dose counts.

Figure 8: The Macap MI20 Touch Coffee Grinder positioned in a kitchen environment, ready for use.

Maintenance and Cleaning

Regular cleaning and maintenance will ensure the longevity and optimal performance of your Macap MI20 Touch grinder.

Daily Cleaning

• Empty any remaining beans from the hopper.
• Remove the removable tray and discard any spilled grounds. Wipe the tray clean with a damp cloth.
• Use a soft brush or dry cloth to wipe down the exterior of the grinder and the grinding chute to remove coffee dust.

Deep Cleaning (Monthly or as needed)

• Unplug the grinder from the power outlet.
• Remove the bean hopper and clean it with warm, soapy water. Ensure it is completely dry before reattaching.
• Carefully remove the upper burr. Use a brush or vacuum cleaner to remove any accumulated coffee grounds from the burrs and grinding chamber.
• Do not wash the burrs with water.
• Reassemble the burrs and hopper, ensuring all parts are securely in place.

Troubleshooting

If you encounter issues with your grinder, refer to the table below for common problems and solutions.

Specifications

Warranty and Support

Macap products are manufactured to the highest quality standards and are backed by a manufacturer's warranty. For specific warranty details, please refer to the warranty card included with your product or visit the official Macap website.

For technical support, service, or replacement parts, please contact your authorized Macap dealer or the customer support team. When contacting support, please have your product model number (MI20 Touch) and serial number ready.

Online Resources: For additional information, FAQs, and video tutorials, please visit the official Macap support page.