Introduction
This manual provides detailed instructions for the assembly, operation, and maintenance of your Nathan James Beacon 3-Drawer Dresser. The Beacon dresser features a bohemian design with woven seagrass drawer fronts and a wire-brushed wood veneer finish. It is designed for use in bedrooms, guest rooms, or living areas, offering three spacious drawers for storage.
Safety Information
Please read and understand all safety warnings and instructions before assembly and use. Failure to follow these instructions may result in injury or product damage.
- Tip-Over Hazard: Furniture can tip over, causing serious or fatal injuries. Always secure this dresser to the wall using the provided anti-tip kit.
- Weight Limits: Do not exceed the specified weight limits. The top surface supports up to 30 lbs. Each drawer supports up to 30 lbs.
- Assembly: Ensure all parts are securely fastened before use. Do not use power tools for assembly unless specifically instructed, as overtightening may damage the product.
- Children: Keep small parts and packaging materials away from children during assembly.
- Commercial Use: This product is not recommended for commercial use.
Package Contents
Verify that all components are present before beginning assembly. If any parts are missing or damaged, please contact customer support.
- Dresser Frame (pre-assembled top section)
- 3 Drawers with woven seagrass fronts
- Metal drawer slides
- Solid wood legs
- Assembly hardware (screws, connectors, etc.)
- Anti-tip kit
- Instruction Manual
Assembly Instructions
Assembly is estimated to take approximately 200 minutes. A Phillips head screwdriver is required (not included).
- Unpack Components: Carefully remove all parts from the packaging. Lay them out on a soft, clean surface to prevent scratches.
- Identify Pre-assembled Top: The main top section of the dresser frame comes pre-assembled.
- Attach Legs: Securely attach the solid wood legs to the bottom of the dresser frame using the provided hardware. Ensure they are tightened firmly.
- Assemble Drawers: Follow the individual instructions for assembling each of the three drawers. This typically involves attaching the sides, back, and bottom to the woven seagrass front panel.
- Install Drawer Slides: Attach the metal drawer slides to the dresser frame and the sides of each drawer, ensuring smooth operation.
- Insert Drawers: Carefully slide each assembled drawer into its designated slot in the dresser frame.
- Attach Anti-Tip Kit: For safety, attach the anti-tip kit to the back of the dresser and to a wall stud, following the specific instructions included with the kit. This is a critical step to prevent accidental tipping.
Operating Instructions
The Beacon dresser is designed for straightforward use.
- Opening Drawers: Gently pull the integrated handles to open the drawers. The metal slides ensure smooth operation.
- Closing Drawers: Push the drawers firmly until they are fully closed and flush with the dresser frame.
- Loading Drawers: Distribute weight evenly within each drawer and do not exceed the 30 lbs weight limit per drawer.
Maintenance and Care
Proper care will help maintain the appearance and longevity of your dresser.
- Cleaning: Wipe the dresser surfaces with a dry cloth. Avoid abrasive cleaners or harsh chemicals, which can damage the wire-brushed wood veneer and seagrass.
- Spills: Immediately blot any spills with a clean, dry cloth.
- Sunlight: Avoid prolonged exposure to direct sunlight to prevent fading or discoloration of the wood and seagrass.
- Humidity: Maintain a stable humidity level in the room to prevent wood warping or cracking.
- Drawer Slides: Periodically check drawer slides for smooth operation. If they become stiff, a silicone-based lubricant can be applied sparingly.
Troubleshooting
If you encounter any issues, refer to the following common solutions:
| Problem | Possible Cause | Solution |
|---|---|---|
| Drawers do not slide smoothly. | Misaligned slides or debris in tracks. | Check that drawer slides are properly aligned and free of obstructions. Apply a silicone lubricant if necessary. |
| Dresser feels wobbly. | Loose hardware or uneven floor. | Ensure all assembly hardware is tightened. Adjust leg levelers (if present) or place shims under legs on uneven floors. Confirm anti-tip kit is securely installed. |
| Drawer does not close completely. | Obstruction or overfilled drawer. | Remove items from the drawer to check for overfilling. Inspect the drawer and frame for any obstructions. |
Specifications
- Model Name: Beacon Dresser
- Model Number: 71411-2
- Dimensions: 18"D x 31"W x 31"H (per unit)
- Materials: MDF, Wood Veneer, Seagrass, Particleboard, Pine wood/Rubberwood
- Finish Type: Wire Brushed
- Color: Light Brown/Seagrass
- Number of Drawers: 3
- Weight Limit (Top): 30 lbs
- Weight Limit (Each Drawer): 30 lbs
- Item Weight: 97 pounds (per unit)
- Assembly Required: Yes
- Tools Required: Phillips head screwdriver
Warranty and Support
Your Nathan James Beacon 3-Drawer Dresser is backed by a Lifetime Manufacturer Warranty. This warranty covers any quality issues. If you experience any problems, please contact Nathan James customer support for assistance. They will provide a replacement immediately, no questions asked.
For support, visit the official Nathan James website or refer to the contact information provided with your purchase documentation.
