Bonnlo Office Chair

Download PDF
Contents

Bonnlo Comfy Home Office Desk Chair User Manual

Model: Office Chair

1. Introduction

Thank you for choosing the Bonnlo Comfy Home Office Desk Chair. This manual provides essential information for the safe assembly, operation, and maintenance of your new chair. Please read these instructions carefully before assembly and retain this manual for future reference.

2. Safety Information

WARNING:

  • Ensure all parts are present and undamaged before assembly.
  • Do not use power tools for assembly, as this may overtighten screws and damage components.
  • Do not stand on the chair.
  • Do not use the chair if any parts are loose, damaged, or missing.
  • Keep children away from small parts during assembly.
  • Maximum weight capacity: 330.7 lbs (150 kg). Do not exceed this limit.

3. Parts List

Before assembly, verify that all components are included in your package. If any parts are missing or damaged, please contact customer support.

  • A. Backrest and Seat Assembly (1)
  • B. Base (1)
  • C. Gas Lift Cylinder (1)
  • D. Gas Lift Cover (1)
  • E. Mechanism Plate (1)
  • F. Screws (various sizes, quantity as needed)
  • G. Allen Wrench (1)
Exploded view of Bonnlo Comfy Home Office Desk Chair parts
Figure 1: Exploded view of chair components. This image shows the individual parts of the Bonnlo Comfy Home Office Desk Chair, including the seat, backrest, base, gas lift, and hardware, laid out for assembly.

4. Assembly Instructions

Follow these steps carefully to assemble your Bonnlo Comfy Home Office Desk Chair.

  1. Attach Mechanism Plate to Seat:

    Place the seat assembly (A) upside down on a soft, clean surface to prevent scratching. Align the mechanism plate (E) with the pre-drilled holes on the underside of the seat. Ensure the lever is facing the front of the seat. Secure with screws (F) using the Allen wrench (G). Tighten all screws firmly but do not overtighten.

  2. Insert Gas Lift into Base:

    Insert the gas lift cylinder (C) into the center hole of the base (B). Place the gas lift cover (D) over the gas lift cylinder.

  3. Attach Seat to Gas Lift:

    Carefully place the assembled seat (with mechanism plate attached) onto the gas lift cylinder (C). Press down firmly to ensure a secure connection.

Assembled Bonnlo Comfy Home Office Desk Chair in a room setting
Figure 2: The Bonnlo Comfy Home Office Desk Chair fully assembled and placed in a home office environment, showcasing its design and functionality.

5. Operating Instructions

Your Bonnlo Comfy Home Office Desk Chair features adjustable functions for personalized comfort.

  • Height Adjustment: To adjust the seat height, lift the lever located on the right side of the seat (when seated).
    • To raise the seat: Lift the lever while taking your weight off the seat.
    • To lower the seat: Lift the lever while remaining seated.

    The seat height range is approximately 19.1" to 20.5".

  • Swivel Function: The chair is designed to swivel 360 degrees for ease of movement and access.
Bonnlo Comfy Home Office Desk Chair in a room, showing its full design
Figure 3: The Bonnlo Comfy Home Office Desk Chair in a typical room setting, highlighting its elegant design and padded armrests.

6. Maintenance

Proper care will extend the life and appearance of your chair.

  • Cleaning: For velvet upholstery, gently blot spills with a clean, dry cloth. For general cleaning, use a soft brush or vacuum with an upholstery attachment to remove dust and debris. For stubborn stains, consult a professional upholstery cleaner.
  • Hardware: Periodically check all screws and bolts to ensure they are tight. Retighten if necessary.
  • Avoid: Do not use harsh chemicals, abrasive cleaners, or excessive moisture on the chair. Avoid direct sunlight exposure for prolonged periods to prevent fading.

7. Troubleshooting

ProblemPossible CauseSolution
Chair wobbles or feels unstable.Loose screws or uneven assembly.Check and tighten all assembly screws. Ensure the chair is on a flat, even surface.
Seat height adjustment not working.Gas lift cylinder not properly engaged or damaged.Ensure the gas lift is fully inserted into the mechanism plate and base. If the issue persists, the gas lift may need replacement. Contact customer support.
Squeaking noises.Loose connections or friction between parts.Tighten all screws. Apply a small amount of silicone lubricant to moving parts if necessary, avoiding upholstery.

8. Specifications

FeatureDetail
BrandBonnlo
Model NameOffice Chair
ColorWhite
Product Dimensions (D x W x H)27.4" x 28.1" x 36.6" ~ 39"
Seat Width20.1"
Seat Depth18.7"
Seat Thickness4.5"
Seat Height Range19.1" ~ 20.5"
Backrest Height19.5"
Item Weight30 lbs
Weight Capacity330.7 lbs

9. Warranty and Support

For warranty information or technical support, please contact Bonnlo customer service. Details are typically provided with your purchase documentation or on the official Bonnlo website.

Customer Support: Please refer to your purchase receipt or the Bonnlo official website for contact information.

© 2025 Bonnlo. All rights reserved.

This manual is subject to change without notice.

Documents and downloads

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.

After a successful submission, we securely hash the supplied account or form email before sending it to Microsoft Advertising for conversion attribution. Privacy details.