Introduction
This manual provides instructions for the safe and effective use of your Keter Pro Gear XL 2-Drawer Tool Box. Please read this manual thoroughly before using the product and retain it for future reference.
The Keter Pro Gear XL 2-Drawer Tool Box is designed for organized and mobile storage of tools and small parts. It features a robust construction suitable for demanding environments, such as construction sites or workshops. Its modular design allows for integration with other Keter Pro Gear System components.
Image: The Keter Pro Gear XL 2-Drawer Tool Box in its closed state, showcasing its robust black exterior and orange accents.
Product Features
- Heavy-Duty Construction: Equipped with strong metal ball-bearing drawer slides and heavy-duty front latches for secure transport and reliable performance.
- Efficient Organization: Deep drawers with integrated dividers for optimal organization of tools and small parts.
- Mobile and Flexible: Designed with a telescopic handle option and compatibility for 9-inch wheels (not included) for easy movement.
- Modular Design: Allows for easy integration and adaptation with other Keter Pro Gear System 2.0 & 1.0 components.
- Water Resistant: Provides protection against moisture.
Setup
1. Unpacking
Carefully remove the tool box from its packaging. Inspect the unit for any signs of damage during transit. If any damage is found, contact customer support immediately.
2. Drawer Dividers Installation
The deep drawers include integrated dividers for customizable organization. To install or adjust dividers:
- Pull out the desired drawer completely.
- Locate the slots inside the drawer.
- Insert the divider into the desired slots to create compartments. Ensure the divider is securely seated.
Image: The tool box with both drawers extended, showing the internal dividers used to organize tools and small items.
3. Optional Mobility Setup (Wheels and Telescopic Handle)
This tool box is designed for compatibility with 9-inch wheels and a telescopic handle (not included). Refer to the instructions provided with your Keter Pro Gear System wheels and handle for proper attachment.
4. Stacking and Interlocking with Pro Gear System
The Keter Pro Gear XL 2-Drawer Tool Box is fully compatible with RIDGID's Pro Gear System 2.0 & 1.0. To stack and interlock units:
- Place the base unit on a stable, level surface.
- Align the bottom of the next unit with the top of the base unit.
- Press down firmly until the units click into place, indicating a secure interlock.
- To detach, release the side latches (if present on the system) and lift the top unit.
Image: Several Keter Pro Gear XL tool boxes and other system components are shown stacked and arranged on a construction site, demonstrating their modularity and mobility.
Operating Instructions
1. Opening and Closing Drawers
To open a drawer, pull the orange handle outwards. The metal ball-bearing slides ensure smooth operation. To close, push the drawer firmly until it latches securely.
Image: A person is shown placing power tools into an open drawer of the Keter Pro Gear XL tool box, highlighting the spacious interior and ease of access.
2. Securing the Tool Box
Ensure all drawers are fully closed and the front latches are engaged before moving or transporting the tool box. This prevents accidental opening and loss of contents.
3. Loading Capacity
Distribute the weight of your tools evenly within the drawers. Avoid overloading to ensure smooth drawer operation and prevent damage to the unit or its contents.
Maintenance
1. Cleaning
Clean the tool box regularly with a damp cloth and mild soap. Avoid abrasive cleaners or solvents, as these may damage the polypropylene material. Ensure the unit is dry before storing or closing.
2. Drawer Slides and Latches
Periodically inspect the metal ball-bearing drawer slides and front latches for any debris or obstructions. Keep them clean to ensure smooth operation and secure closure. A light application of silicone spray can help maintain smooth drawer movement if needed.
3. Storage
Store the tool box in a cool, dry place when not in use. While water-resistant, prolonged exposure to extreme weather conditions is not recommended.
Troubleshooting
- Drawer is difficult to open or close:
Check for obstructions in the drawer or along the slides. Clean the drawer slides of any dirt or debris. Ensure the tool box is on a level surface.
- Latches do not secure properly:
Ensure the drawer is fully pushed in. Inspect the latches for any damage or foreign objects preventing them from engaging. Clean the latch mechanism if necessary.
- Unit does not stack securely:
Verify that the units are correctly aligned. Check for any debris on the interlocking surfaces. Ensure the base unit is stable.
Specifications
| Brand | Keter |
| Model Number | 259841 |
| Material | Polypropylene |
| Color | Black |
| Product Dimensions (L x W x H) | 56.6 cm x 38.5 cm x 41.1 cm (22.3"L x 15.2"W x 16.2"H) |
| Water Resistance Level | Water Resistant |
| Number of Compartments | 2 (drawers) |
| Included Components | Tool box |
Image: A technical drawing illustrating the dimensions of the Keter Pro Gear XL 2-Drawer Tool Box, showing length, width, and height in both centimeters and inches.
Warranty and Support
Warranty Information
This Keter product comes with a 2-year manufacturer's warranty from the date of purchase. This warranty covers defects in materials and workmanship under normal use.
The warranty does not cover damage resulting from misuse, abuse, accidents, unauthorized repairs, or normal wear and tear.
Customer Support
For any questions, concerns, or warranty claims regarding your Keter Pro Gear XL 2-Drawer Tool Box, please contact the seller directly through your purchase platform. Provide your purchase details and a clear description of the issue to facilitate prompt assistance.
