1. Introduction
This manual provides essential information for the safe and efficient operation, maintenance, and troubleshooting of your La Pavoni Nuovo Kube Mill Coffee Grinder. The Kube Mill features a flat grinding mechanism, a 150g funnel, and an intuitive adjustment button. Its advanced anti-vibration system significantly reduces grinding noise by approximately 20dB compared to conventional coffee grinders, ensuring a quieter experience.

Figure 1: La Pavoni Nuovo Kube Mill Coffee Grinder. This image shows the overall design of the grinder, highlighting its sleek black body, chrome accents, and the transparent bean hopper on top.
2. Important Safety Instructions
Please read all safety instructions carefully before using the appliance. Failure to follow these instructions may result in electric shock, fire, or serious injury.
- Always unplug the grinder from the power outlet before cleaning, maintenance, or if it is not in use for an extended period.
- Do not immerse the grinder, power cord, or plug in water or any other liquid.
- Keep hands and utensils out of the bean hopper and grinding chamber during operation to prevent injury.
- Ensure the bean hopper lid is securely in place before operating the grinder.
- This appliance is intended for grinding whole roasted coffee beans only. Do not grind other substances.
- Do not operate the grinder with a damaged cord or plug, or if the appliance malfunctions or has been damaged in any manner.
- Supervise children closely when the appliance is in use or within their reach.
- Place the grinder on a stable, flat, and dry surface.
3. Package Contents
Verify that all items are present and in good condition upon unpacking:
- La Pavoni Nuovo Kube Mill Coffee Grinder Unit
- Bean Hopper with Lid
- Grounds Container (if included, or portafilter holder)
- User Manual (this document)
- Cleaning Brush

Figure 2: The La Pavoni Nuovo Kube Mill Coffee Grinder positioned on a kitchen counter next to coffee beans and a tamper. This image illustrates the grinder's compact size and how it might appear in a home coffee setup.
4. Setup
- Unpack the Grinder: Carefully remove all packaging materials. Retain packaging for future transport or storage.
- Placement: Place the grinder on a clean, dry, stable, and level surface, away from heat sources and direct sunlight. Ensure adequate ventilation around the unit.
- Attach the Bean Hopper: Align the bean hopper with the opening on top of the grinder. Gently push down and twist clockwise until it locks securely into place.
- Connect Power: Plug the power cord into a grounded electrical outlet.
- Initial Cleaning: Before first use, wipe the exterior of the grinder with a damp cloth. The bean hopper and grounds container can be washed with warm soapy water, rinsed, and thoroughly dried. Ensure all parts are completely dry before assembly and use.

Figure 3: Front view of the La Pavoni Nuovo Kube Mill Coffee Grinder. This image provides a clear view of the front panel, including the dispensing chute and the portafilter holder.
5. Operating Instructions
- Fill the Bean Hopper: Open the bean hopper lid and pour whole roasted coffee beans into the hopper. Do not overfill; the capacity is 150g. Close the lid securely.
- Adjust Grind Setting: The La Pavoni Nuovo Kube Mill features an easy adjust button and a dial for precise grind adjustment. Rotate the dial to select your desired grind fineness. Finer settings (lower numbers) are suitable for espresso, while coarser settings (higher numbers) are for drip coffee or French press. Experiment to find the ideal setting for your brewing method.
- Grinding Coffee:
- For Portafilter: Place your portafilter securely in the holder beneath the dispensing chute.
- For Grounds Container: Position a suitable container under the dispensing chute.
- After Grinding: Remove your portafilter or container. It is recommended to clean any residual grounds from the dispensing chute after each use to prevent clogging.

Figure 4: Close-up view of the grind adjustment dial. This image highlights the numerical markings and the La Pavoni branding on the dial, indicating the range of grind settings from fine (espresso) to coarse (moka).
6. Maintenance and Cleaning
Regular cleaning ensures optimal performance and extends the lifespan of your grinder.
6.1 Daily Cleaning
- Exterior: Wipe the exterior of the grinder with a soft, damp cloth. Do not use abrasive cleaners or solvents.
- Dispensing Chute: Use the provided cleaning brush to clear any residual coffee grounds from the dispensing chute.
- Bean Hopper & Lid: Empty any remaining beans. Wipe the inside of the hopper and the lid with a dry cloth.
6.2 Periodic Deep Cleaning (Recommended Monthly)
- Unplug the Grinder: Always ensure the grinder is unplugged before performing any deep cleaning.
- Remove Bean Hopper: Empty the hopper and remove it by twisting counter-clockwise and lifting.
- Access Burrs: Refer to your grinder's specific instructions for accessing and removing the grinding burrs. Typically, this involves rotating the grind adjustment collar past its coarsest setting or unscrewing a retaining ring.
- Clean Burrs: Use the cleaning brush or a vacuum cleaner to remove all coffee grounds and oils from the burrs and the grinding chamber. Do not wash burrs with water.
- Reassemble: Carefully reassemble the burrs and hopper, ensuring all parts are correctly aligned and secured.
7. Troubleshooting
| Problem | Possible Cause | Solution |
|---|---|---|
| Grinder does not turn on. | Not plugged in; power outlet faulty; circuit breaker tripped; internal fuse. | Ensure plug is fully inserted. Test outlet with another appliance. Reset circuit breaker. Contact customer support if fuse is suspected. |
| No coffee dispensed or slow grinding. | Bean hopper empty; coffee beans stuck; grinding burrs clogged; grind setting too fine. | Add beans. Gently shake grinder to dislodge beans. Perform deep cleaning of burrs and chute. Adjust to a coarser grind setting. |
| Inconsistent grind. | Burrs worn; foreign object in grinding chamber; improper grind setting. | Inspect burrs for wear and replace if necessary. Unplug and carefully check for foreign objects. Adjust grind setting. |
| Excessive noise during operation. | Foreign object in burrs; loose components. | Unplug and inspect burrs for foreign objects. Ensure all components are securely assembled. |
8. Specifications
- Model: LPGKBN02EU
- Brand: La Pavoni
- Product Dimensions: 7.48 x 5.12 x 12.99 inches
- Item Weight: 12.1 pounds
- Manufacturer: La Pavoni
- ASIN: B0F1YRWT9Y
- Capacity: 150 Grams (Bean Hopper)
- Grinding Mechanism: Flat Burrs
- Noise Reduction: Approximately 20dB compared to traditional grinders
9. Warranty and Customer Support
For information regarding warranty coverage, service, or technical support, please refer to the warranty card included with your product or visit the official La Pavoni website. Please have your model number (LPGKBN02EU) and purchase date available when contacting support.
Official Website: www.lapavoni.com





