EMBATHER Shower Faucet Set Shower System Instruction Manual

1. Introduction

Thank you for choosing the EMBATHER Shower Faucet Set Shower System. This manual provides detailed instructions for the proper installation, operation, and maintenance of your new shower system. Please read this manual thoroughly before installation and retain it for future reference. This system features a push-button diverter, a 10-inch ceiling-mount rainfall shower head, a 6-inch wall-mount shower head, and a multi-function handheld shower.

Image 1.1: Overview of the EMBATHER Shower Faucet Set Shower System components.

2. Package Contents

Please verify that all components are present and undamaged before beginning installation. If any parts are missing or damaged, please contact customer support.

• 10-inch Ceiling-Mount Shower Head
• 6-inch Wall-Mount Shower Head
• Handheld Shower Head
• Shower Hose
• Valve (Main Body)
• Dech Plate (Trim Plate)
• Shower Holder Parts
• Main Body Spare Parts
• Gloves
• Instruction Manual

Image 2.1: Visual representation of all included package contents.

3. Installation Guide

Professional installation is recommended. Ensure water supply is turned off before starting. All valves and fittings use standard NPT threads complying with U.S. plumbing codes.

3.1 Rough-in Valve Installation

1. Prepare the wall cavity for the rough-in valve. The allowable embedded depth ranges from 2.17 to 2.95 inches.
2. Install the rough-in valve body, ensuring it is level and securely mounted within the wall studs. The 'UP' indicator on the valve should face upwards.
3. Connect the hot and cold water supply lines to the marked inlets on the valve body (red for hot, blue for cold). Connect the outlet lines to the ceiling shower, wall-mount shower, and handheld shower as indicated.
4. Before making final connections, flush the pipes to prevent clogs and ensure proper sewage drainage.
5. Install the rubber gasket, then turn on the water supply to check for stable pressure and inspect all connections for leaks.
6. After applying the trim plate, you can trim off any excess material from the valve cover if necessary.

Image 3.1: Installation diagram for the brass pressure-balance valve cartridge.

Image 3.2: Detailed dimensions and connections for shower system installation.

3.2 Shower Head and Handheld Installation

1. Ceiling-Mount Shower Head: Securely attach the 10-inch rainfall shower head to the ceiling-mounted arm. Ensure the connection is tight to prevent leaks. The shower head features 360-degree rotation for adjustable angle.
2. Wall-Mount Shower Head: Attach the 6-inch wall-mount shower head to its arm. This head also offers 360-degree rotation for customized angles.
3. Handheld Shower Head: Install the shower holder on the wall. Connect the shower hose to the handheld shower head and then to the designated outlet on the valve. Place the handheld shower head into the holder.

4. Operating Instructions

The EMBATHER shower system features an easy-to-use push-button diverter and a single handle for temperature control.

4.1 Temperature and Flow Control

• The main handle controls the water flow and temperature. Rotate the handle to adjust the water temperature from cold to hot.
• The cUPC-certified pressure balance valve cartridge effectively controls water pressure to prevent scalding and cold water shocks, ensuring a safe and comfortable experience.

Image 4.1: Operating the push-button diverter and temperature control handle.

4.2 Shower Mode Selection

The push-button diverter allows you to easily switch between three shower modes or activate them simultaneously:

• Rainfall Shower: Press the top button to activate the 10-inch ceiling-mount rainfall shower head for a full-body spray.
• Wall-Mount Shower: Press the middle button to activate the 6-inch wall-mount shower head for a targeted spray.
• Handheld Shower: Press the bottom button to activate the handheld shower head.
• You can activate any combination of these three modes simultaneously for a customized shower experience.

Image 4.2: Illustration of the three distinct shower modes available.

4.3 Handheld Shower Functions

The handheld shower head offers two distinct spray functions:

• Shower Spray Function: Provides a standard shower spray.
• Spray Gun Mode: Activated by a switch button on the handheld unit, this mode delivers a powerful, concentrated spray ideal for cleaning the shower area or rinsing pets.

Image 4.3: The 2-in-1 handheld shower head with its dual spray functions.

5. Maintenance and Care

Regular cleaning and proper care will ensure the longevity and optimal performance of your EMBATHER shower system.

5.1 Cleaning the Finish

• The matte black finish is designed to resist water spots and fingerprints.
• Clean the surfaces with a soft, damp cloth and mild soap. Avoid abrasive cleaners, harsh chemicals, or scouring pads, as these can damage the finish.
• Rinse thoroughly with clean water and dry with a soft cloth to prevent water spots.

Image 5.1: The matte black finish of the shower system, designed for easy maintenance.

5.2 Nozzle Maintenance

• The shower heads feature self-cleaning silicone nozzles. If water flow becomes restricted due to mineral buildup, gently flick the silicone nozzles with your finger to dislodge any deposits.
• For stubborn buildup, a solution of equal parts white vinegar and water can be applied to the nozzles for a few minutes before scrubbing gently and rinsing.

Image 5.2: Self-cleaning silicone nozzles on the 10-inch rainfall shower head.

6. Troubleshooting

This section addresses common questions and issues you might encounter with your shower system.

• Does this valve come with an anti-scald feature?
  Yes, this product features a cUPC-certified pressure-balancing valve that adjusts water pressure to prevent scalding and cold-water shocks, ensuring safe and comfortable showers.
• When the valve is opened, only hot and cold water flows out from the showerhead, with no warm water available?
  The valve provides fully adjustable temperature control. Simply turn the handle to mix hot and cold water for your preferred warmth.
• Is this only for new construction? How can I use this with an existing set up?
  This is a rough-in valve designed for pre-installation during construction. Retrofitting requires wall access for proper mounting.
• Can I replace the shower cartridge without cutting the tile?
  Cartridge replacement requires access through a service panel (if available) or tile removal. We recommend consulting a licensed plumber for assessment.
• Are all valves and connectors compatible with American Standards?
  Yes, all valves and fittings use standard NPT threads complying with U.S. plumbing codes.

Image 6.1: Common questions and answers regarding the shower system.

7. Product Specifications

8. Warranty and Support

EMBATHER products are built with quality and durability in mind. If you encounter any quality-related issues or require assistance, please contact EMBATHER customer support. Refer to your purchase documentation for specific warranty details and contact information.

For further assistance, please visit the official EMBATHER store or contact their customer service directly.