1. Introduction
Thank you for choosing the Anwick Teddy Fleece Home Office Chair Model 88. This manual provides essential information for the safe assembly, operation, and maintenance of your new chair. Please read these instructions carefully before use and retain them for future reference.
2. Safety Instructions
- Ensure all components are securely fastened before use.
- Do not stand on the chair.
- Do not use the chair if any parts are damaged or missing. Contact customer support for replacement parts.
- Keep children away from the chair during assembly. Small parts may pose a choking hazard.
- Maximum weight capacity for this chair is 350 lbs (158 kg). Do not exceed this limit.
- Avoid exposing the chair to direct sunlight or extreme temperatures to prevent material degradation.
3. Package Contents
Please verify that all components are present before beginning assembly. If any parts are missing or damaged, contact Anwick customer service.
- Chair Backrest
- Chair Seat
- Armrests (2)
- Base with Casters (5 wheels)
- Gas Lift Cylinder
- Mechanism Plate
- Hardware Pack (screws, washers, Allen wrench)
- Instruction Manual
4. Setup and Assembly
The Anwick Teddy Fleece Home Office Chair requires simple assembly. Follow these general steps for quick installation. Refer to the included detailed instructions for specific diagrams and hardware usage.
- Attach Casters to Base: Insert each caster wheel into the holes at the end of each leg of the chair base until it clicks securely into place.
- Insert Gas Lift: Place the gas lift cylinder into the center hole of the assembled chair base.
- Attach Mechanism Plate to Seat: Align the mechanism plate with the pre-drilled holes on the underside of the chair seat. Secure it using the provided screws and Allen wrench. Ensure the lever is positioned correctly (usually on the right side when seated).
- Attach Armrests: Secure the armrests to the chair seat and backrest using the provided screws. Do not overtighten initially to allow for minor adjustments.
- Connect Seat to Gas Lift: Carefully place the assembled seat onto the gas lift cylinder, ensuring the tapered end of the gas lift fits into the mechanism plate's central opening. Apply gentle downward pressure to secure.
- Final Tightening: Once all parts are aligned, tighten all screws firmly.
For visual guidance on assembly, please refer to the detailed diagrams in the separate assembly guide included in your package.
5. Operating Instructions
Your Anwick Home Office Chair is designed with several adjustable features to enhance comfort and support.
5.1. Seat Height Adjustment
To adjust the seat height, locate the lever on the right side beneath the seat.
- To Raise: While standing, pull the lever upwards. The seat will rise automatically. Release the lever at the desired height.
- To Lower: While seated, pull the lever upwards. The seat will lower under your weight. Release the lever at the desired height.
The seat height can be adjusted between approximately 19.25 inches (49 cm) and 22.75 inches (58 cm).

Image: Adjustable height and tilt function levers. The left diagram shows pulling the lever up to adjust seat height. The right diagram shows pushing and pulling the lever to lock/unlock tilt, and rotating a knob to adjust tilt tension.
5.2. Tilt Function and Tension Adjustment
The chair features a tilt function allowing the backrest and seat to rock. This helps reduce lumbar pressure.
- To Unlock Tilt: Pull the same lever (used for height adjustment) outwards from under the seat. The chair will now allow rocking motion.
- To Lock Tilt: Push the lever inwards to lock the chair in an upright position.
- Tilt Tension Adjustment: Rotate the round knob located under the front of the seat. Turn clockwise to increase tilt tension (making it harder to recline) or counter-clockwise to decrease tension (making it easier to recline).
5.3. 360° Swivel and Mobility
The chair is equipped with a 360-degree swivel seat and smooth-rolling casters for easy movement.
- Swivel: The seat can rotate a full 360 degrees, allowing you to turn without moving the base.
- Mobility: The five casters (wheels) allow the chair to glide smoothly across most floor surfaces. Ensure the floor is clear of obstructions for optimal movement.

Image: The chair with an arrow indicating 360-degree swivel motion of the wheels. This highlights the chair's mobility feature.
6. Maintenance
Regular maintenance will prolong the life and appearance of your Anwick office chair.
- Cleaning Fabric: For the teddy fleece fabric, gently spot clean with a mild detergent and a damp cloth. Blot dry immediately. Avoid harsh chemicals or abrasive cleaners.
- Frame Cleaning: Wipe metal parts with a soft, damp cloth. Dry thoroughly.
- Caster Maintenance: Periodically check the casters for hair or debris that may impede smooth rolling. Clean as needed.
- Hardware Check: Every few months, check all screws and bolts to ensure they are tight. Retighten if necessary to maintain stability.
- Avoid Overloading: Do not exceed the maximum weight capacity of 350 lbs (158 kg).
7. Troubleshooting
If you encounter any issues with your chair, refer to the following common problems and solutions.
- Chair Does Not Adjust Height:
Solution: Ensure the gas lift lever is fully engaged. If the issue persists, the gas lift cylinder may be faulty and require replacement. - Chair Wobbles or Feels Unstable:
Solution: Check all assembly screws and bolts. Tighten any loose connections. Ensure the chair is on a flat, even surface. - Casters Do Not Roll Smoothly:
Solution: Inspect casters for trapped debris (hair, lint, etc.). Clean them thoroughly. Ensure casters are fully inserted into the base. - Chair Squeaks:
Solution: Identify the source of the squeak. It may be loose hardware; tighten all screws. A small amount of silicone lubricant can be applied to moving metal parts if necessary, avoiding contact with fabric. - Tilt Function Not Working:
Solution: Ensure the tilt lock lever is disengaged (pulled outwards). Adjust the tilt tension knob to a lighter setting if it feels too stiff.
If these solutions do not resolve the issue, please contact Anwick customer support for further assistance.
8. Specifications
| Brand | Anwick |
| Model Number | 88 |
| Material | Teddy Fleece (fabric), Metal (frame) |
| Product Dimensions (D x W x H) | 23.5" x 23.8" x 40" (59.7 cm x 60.5 cm x 101.6 cm) |
| Item Weight | 23.1 lbs (10.5 kg) |
| Maximum Weight Recommendation | 350 lbs (158 kg) |
| Adjustable Seat Height Range | 19.25" - 22.75" (49 cm - 58 cm) |
| Seat Depth | 23.5" (59.7 cm) |
| Features | Adjustable Height, Tilt Function, 360° Swivel Wheels, Padded Armrests |

Image: Detailed product dimensions including overall height (93-101cm), seat height (47-55cm), seat width (48cm), and overall width (63cm).
9. Warranty and Support
For warranty information, please refer to the documentation provided at the time of purchase or contact your retailer. Anwick is committed to customer satisfaction. If you have any questions, require assistance, or need to order replacement parts, please contact Anwick customer support through the retailer's platform or the official Anwick website.