1. Introduction
Thank you for choosing the LifePlus Commercial Ice Maker Machine. This manual provides essential information for the safe operation, installation, maintenance, and troubleshooting of your new ice maker. Please read this manual thoroughly before use and retain it for future reference.
1.1 Safety Precautions
- Ensure the unit is placed on a stable, level surface.
- Do not block ventilation openings.
- Keep the appliance away from heat sources and direct sunlight.
- Do not operate the machine with a damaged power cord or plug.
- Unplug the machine before cleaning or performing any maintenance.
- This appliance is not intended for use by persons (including children) with reduced physical, sensory or mental capabilities, or lack of experience and knowledge, unless they have been given supervision or instruction concerning use of the appliance by a person responsible for their safety.
Figure 1.1: LifePlus Commercial Ice Maker Machine, demonstrating its dual water inlet capabilities and ice production.
2. Product Features
The LifePlus Commercial Ice Maker Machine is designed for high efficiency and convenience, suitable for various settings including bars, homes, and offices.
- Fast Ice Making: Produces up to 90 pounds of ice per day, with 36 pieces of clear ice in one cycle within 16 minutes.
- Effective Insulation: Constructed with durable stainless steel and advanced foaming technology to maintain ice temperature. Features a food-grade ABS interior.
- Multi-Function Control: Allows selection of ice cube size (S-M-L) and adjustment of ice thickness. Intuitive indicator panel signals when the bin is full or water is absent.
- Two Water Inflow Ways: Supports both top-loaded bucket water inflow and automatic tap water inflow. A built-in valve controls the water source.
- Self-Cleaning Function: Equipped with an automatic cleaning program for convenient maintenance.
- Energy-Efficient: Designed to save up to 20% on electricity usage.
Figure 2.1: The ice maker features a convenient 18 lbs ice storage bin.
Figure 2.2: The ice maker is designed for energy-efficient operation.
Figure 2.3: Key components including the anti-rust ice tray, flip cover, and control panel.
3. What's in the Box
Upon unpacking, please ensure all the following components are present:
- LifePlus Commercial Ice Maker Machine
- Install Kits (including Drain Hose, Inlet Hose, Ice Scoop, PTFE Tape)
Figure 3.1: Included accessories for the ice maker.
4. Installation and Setup
4.1 Unpacking and Placement
- Carefully remove the ice maker from its packaging.
- Place the unit in an upright position for at least 24 hours before first use. This allows the refrigerant to settle.
- Choose a location that is level, stable, and away from direct sunlight or heat sources. Ensure adequate ventilation around the unit.
Figure 4.1: The ice maker can be used freestanding or installed under a counter.
4.2 Water Connection
Your ice maker supports two water inflow methods: automatic tap water connection or manual bucket water filling.
Figure 4.2: Illustration of the two water inflow options: Tap Water and Up Bucket Water.
Figure 4.3: Detailed view of water connections and the valve for selecting water source.
4.2.1 Tap Water Inflow (Automatic)
- Connect the provided inlet hose to a potable water supply.
- Connect the other end of the inlet hose to the water inlet port on the back of the ice maker.
- Ensure the built-in valve on the ice maker is set to the horizontal position for tap water inflow.
- Turn on the water supply.
4.2.2 Bucket Water Inflow (Manual)
- Place a suitable water bucket (e.g., 5-gallon water bottle) on top of the ice maker, ensuring it is securely seated in the designated inlet.
- Ensure the built-in valve on the ice maker is set to the vertical position for bucket water inflow.
4.3 Drainage Connection
Always ensure there is a water outlet near your unit for proper drainage. Connect the drain hose to the drain outlet on the back of the machine and route it to a suitable drain.
Figure 4.4: Instructions for disassembling the white thin tube, useful for connection or maintenance.
5. Operation
5.1 Control Panel Overview
The ice maker features an intuitive control panel with indicator lights and buttons for easy operation.
- Power Button: Turns the machine on/off.
- Arrow Buttons: Adjust ice cube size (S-M-L) and thickness.
- Water Indicator: Lights up when water is absent.
- Full Indicator: Lights up when the ice storage bin is full.
Figure 5.1: Overview of the ice making efficiency.
5.2 Ice Making Process
- Ensure the machine is properly connected to a water source and power.
- Press the power button to turn on the ice maker.
- Use the arrow buttons to select your desired ice cube size (S, M, or L).
- The machine will automatically begin the ice making cycle. Ice production typically takes 11-20 minutes per cycle, yielding 36 pieces of ice.
- The indicator panel will alert you if the water supply is low or the ice bin is full.
5.3 Adjusting Ice Thickness
The thickness of the ice cubes can be adjusted by pressing the arrow buttons on the control panel. Experiment with the settings to find your preferred ice thickness.
Figure 5.2: Choose from three ice cube thicknesses: Small, Medium, or Large.
6. Maintenance and Cleaning
Regular cleaning and maintenance are crucial for the longevity and hygienic operation of your ice maker.
6.1 Self-Cleaning Function
- Before making the first batch of ice, or for regular cleaning, ensure the machine is powered on.
- Press and hold the "Scheduled Cleaning" button (if available, or the relevant cleaning button as indicated on your control panel) for more than 5 seconds to activate the "Cleaning Program."
- Allow the machine to complete two cleaning cycles for thorough cleaning.
Figure 6.1: The ice maker features an auto self-cleaning function for healthier refreshment.
6.2 Regular Cleaning
- It is recommended to clean the machine regularly based on usage.
- Unplug the unit before any manual cleaning.
- Wipe down the exterior with a soft, damp cloth.
- Clean the interior, including the ice bin and water reservoir, with a mild detergent and warm water. Rinse thoroughly.
- Ensure all parts are dry before reassembling and operating the machine.
7. Troubleshooting
This section addresses common issues you might encounter with your ice maker. If the problem persists after following these steps, please contact customer support.
| Problem | Possible Cause | Solution |
|---|---|---|
| Ice maker not producing ice. | No water supply; Water inlet valve closed; Temperature too high; Compressor issue. | Check water connection and supply; Ensure water inlet valve is open; Place unit in a cooler environment; Contact support if compressor suspected. |
| "Water Absent" indicator light is on. | No water in reservoir/bucket; Tap water supply off. | Refill water bucket or ensure tap water supply is on and connected. |
| "Ice Full" indicator light is on. | Ice storage bin is full. | Remove ice from the storage bin. |
| Ice melts quickly in storage bin. | Ice maker is not a freezer; Ambient temperature too high. | This ice maker does not store ice long-term; cubes last about 30 minutes before melting and automatically restarting production. For long-term storage, transfer ice to a freezer. Ensure unit is in a cool environment. |
| Machine makes unusual noise. | Unit not level; Internal component issue. | Ensure the unit is on a level surface. If noise persists, contact customer support. |
8. Specifications
| Feature | Detail |
|---|---|
| Brand | LifePlus |
| Model Name | DBJ-F36A |
| Product Dimensions | 14.09"D x 13.78"W x 24.8"H (35.8 x 35 x 63 cm) |
| Weight | 46.75 Pounds (21.2 kg) |
| Ice Production Capacity | 90 Pounds / 24 Hours |
| Ice Storage Bin Capacity | 18 Pounds |
| Voltage | 120 Volts (AC) |
| Ice Cycle Time | Approx. 16 minutes (36 pieces) |
| Country of Origin | China |
Figure 8.1: Product dimensions for installation planning.
9. Warranty and Support
For warranty information and customer support, please refer to the documentation provided with your purchase or visit the official LifePlus website. Keep your purchase receipt as proof of purchase for any warranty claims.
For assistance with product issues, troubleshooting, or parts, please contact LifePlus customer service through their official channels. Details can typically be found on the manufacturer's website or on the product packaging.
