ANLAN Blackhead Remover Vacuum User Manual

Introduction

The ANLAN Blackhead Remover Vacuum is an innovative 2-in-1 device designed for deep cleansing and moisturizing the skin. It utilizes unique water-oxygen circulation technology to effectively remove blackheads, whiteheads, dead skin, acne, and oil, leaving the skin clean, hydrated, and smooth.

This manual provides detailed instructions for the safe and effective use, setup, operation, maintenance, and troubleshooting of your ANLAN Blackhead Remover Vacuum.

Safety Information

• Do not use on irritated, damaged, or broken skin.
• Avoid using on areas with skin conditions such as eczema, psoriasis, or severe acne.
• Do not stay on one area for more than 2 seconds to prevent redness or bruising.
• Keep out of reach of children.
• Do not immerse the device in water. Clean only the removable parts as instructed.
• Ensure the nozzle is aligned with the exhaust port to prevent leakage during use.
• Do not tilt the device more than 45 degrees or invert it during operation to avoid water leakage.
• Use only purified water or appropriate foam lotion in the clean water tank. Do not exceed the 30 ml scale line.

Package Contents

Please check the package to ensure all items are present:

• ANLAN Blackhead Remover Vacuum Device
• Large Suction Nozzle (1)
• Medium Suction Nozzle (1)
• Small Suction Nozzle (1)
• USB Charging Cable
• User Manual

Product Overview

Familiarize yourself with the components of your ANLAN Blackhead Remover Vacuum.

Image: The ANLAN Blackhead Remover Vacuum device shown alongside its three interchangeable suction nozzles.

Image: A diagram illustrating the device's 2-in-1 cleansing and hydration capabilities, including water-oxygen circulation and wastewater separation.

Image: A detailed diagram illustrating the water-oxygen circulation and vacuum negative pressure technology for blackhead removal and pore cleansing.

Image: An illustration demonstrating the vacuum negative pressure technology, showing how it dissolves grease and unclogs pores.

Image: A visual representation of the device's clean water tank and separate wastewater tank, highlighting the hygienic separation of fluids.

Setup

1. Charging the Device

Before first use, fully charge the device using the provided USB charging cable. Connect the cable to the device's charging port and a suitable USB power source. The indicator light will show charging status.

2. Filling the Water Tank

Open the clean water tank. Pour 15-25 ml of purified water or a suitable foam lotion into the tank. Do not exceed the 30 ml scale line to prevent leakage during use.

3. Attaching a Suction Nozzle

Select the appropriate suction nozzle for the area you intend to treat. Align the nozzle with the exhaust port on the device and firmly attach it. Ensure it is securely in place to prevent leakage.

Operating Instructions

1. Skin Preparation

Before using the device, apply a hot compress to your face for 5-10 minutes to help open pores. This will facilitate more effective blackhead removal.

Image: A visual guide to the 4-step treatment process, including adding serum, opening pores, removing blackheads, and shrinking pores.

2. Powering On and Adjusting Suction Level

Press the power button to turn on the device. The device has 3 adjustable suction levels:

• Low-level suction: Suitable for dry or sensitive skin.
• Medium-level suction: Suitable for neutral or combination skin.
• High-level suction: Suitable for oily or resilient skin.

Press the power button repeatedly to cycle through the suction levels until you find the one appropriate for your skin type.

Image: A diagram illustrating the three adjustable suction levels and their recommended skin types.

3. Using the Suction Nozzles

Select the appropriate nozzle based on the area of your face:

• Large Suction Head: Ideal for T-zone, cheeks, and forehead (flatter areas).
• Medium Suction Head: Best for nose wings and other detailed areas.
• Small Suction Head: Suitable for the nose tip, corners of the mouth, chin, and other small areas where blackheads accumulate.

Image: A visual guide to the three types of suction heads and their recommended application areas on the face.

4. Application Technique

Move the device slowly and horizontally across your skin. Do not move the device up and down. Stay on each part of the skin for no more than 2 seconds to avoid irritation or bruising. The device should be moved continuously.

5. Post-Treatment Care

After use, apply a cold steamer or a pore-tightening mask to shrink the pores and soothe your skin. This helps to lock in moisture and prevent new impurities from entering the pores.

6. Usage Frequency

• For dry skin: Use once a week.
• For oily/combination skin: Use twice a week.

Consistent use is recommended to see optimal results.

Maintenance

1. Cleaning the Device

After each use, empty the wastewater tank and rinse it thoroughly with clean water. The suction nozzles can also be detached and rinsed. Wipe the main body of the device with a clean, damp cloth. Do not use abrasive cleaners or immerse the main unit in water.

2. Storage

Store the device in a cool, dry place away from direct sunlight and extreme temperatures. Ensure it is clean and dry before storing.

Troubleshooting

Specifications

• Brand: ANLAN
• Model Number: 01-AHTY41-02A
• Dimensions: 20.1 x 10.5 x 5.2 cm
• Weight: 310 g
• Water Tank Capacity: 25 ml (max 30 ml)
• Suction Levels: 3 (Low, Medium, High)
• Charging: USB Rechargeable
• Skin Type Compatibility: All skin types (adjustable suction)

Warranty and Support

ANLAN provides perfect after-sales service. Your satisfaction is our priority. If you have any questions or encounter any issues during use, please feel free to contact ANLAN customer support. Refer to your product packaging or the official ANLAN website for specific contact information and warranty details.