Introduction
Thank you for choosing the Olafus 40W RGB LED Flood Light. This manual provides essential information for the safe and efficient operation of your new flood lights. Please read these instructions thoroughly before installation and use, and retain them for future reference.
Package Contents
- Olafus 40W RGB LED Flood Lights (4 units)
- Remote Control (1 unit)
- Instruction Manual
Safety Instructions
- Ensure the power supply is disconnected before installation or maintenance.
- Do not disassemble or modify the product. Unauthorized modifications may void the warranty and pose safety risks.
- Keep the product away from flammable materials.
- Ensure the power cord is not damaged or pinched during installation.
- This product is rated IP66 waterproof for outdoor use, but avoid submerging it in water.
- Do not stare directly into the light source when it is illuminated, as this may cause eye strain.
Setup
1. Mounting the Flood Light
The Olafus 40W RGB LED Flood Light features a 180° adjustable bracket for versatile mounting. You can install it on ceilings, walls, or place it directly on the ground. Ensure the mounting surface is stable and can support the weight of the light fixture.
To adjust the angle, loosen the screws on the side of the bracket, set the desired angle, and then tighten the screws securely.
Image: This diagram illustrates the physical dimensions of the flood light (6.49 inches L x 1.18 inches W x 4.52 inches H), the 180-degree adjustable bracket, and the efficient heat dissipation design on the back of the unit. The power cord length is 1 meter (3.28 feet).
2. Power Connection
This product is designed for plug-and-play operation. Simply connect the power cord to a standard 120V AC outlet. No complicated wiring is required.
Operating Instructions
Remote Control Functions
The included 44-key remote control allows full command over your flood lights. Ensure the remote is pointed towards the light's sensor for optimal responsiveness. The effective sensing distance is approximately 6-8 meters (19.6-26.2 feet).
Image: This image displays the layout of the 44-key remote control. Key functions include On/Off, Pause/Run, Brightness Adjustment, 20 Preset Colors, DIY Color options, Speed adjustment for dynamic modes, and Timer settings (3H/6H/12H), along with buttons for Jump and Fade modes.
- On/Off: Press the red power button to turn the lights on or off.
- Brightness Adjustment: Use the brightness up/down buttons to increase or decrease light intensity.
- Preset Colors: Select from 20 static colors directly using the color buttons.
- DIY Colors: The remote allows for up to 4900 unique color blends. Use the DIY buttons (DIY1, DIY2, DIY3) to customize and save your preferred colors.
- Dynamic Modes: Choose from 6 dynamic lighting modes: Auto, Flash, Fade, and Jump (available in 3 or 7 colors).
- Speed Adjustment: In dynamic modes, use the 'Quick' and 'Slow' buttons to adjust the transition speed.
- Timer Function: Set the lights to automatically turn off after 3, 6, or 12 hours using the respective timer buttons.
- Memory Function: The lights will remember your last selected color and mode setting when turned off and back on.
Dynamic Modes Overview
The flood lights offer various dynamic modes to suit different atmospheres:
Image: This image displays four examples of the flood light's dynamic modes. Top left shows 'Auto Mode' with a room lit in purple and green. Top right shows 'Flash Mode' illuminating a house exterior in purple and orange. Bottom left shows 'Jump Mode' with people dancing under blue and red lights. Bottom right shows 'Fade Mode' lighting a house exterior in green and red.
- Auto Mode: Cycles through Jump, Fade, and Flash modes automatically.
- Flash Mode: Provides a rapid, thrilling change between colors.
- Fade Mode: Offers soft, gradual transitions between colors, creating a relaxing atmosphere.
- Jump Mode: Creates a captivating, flowing visual effect with abrupt color changes.
Warm White Setting
In addition to RGB colors, the flood light can emit a 2700K warm white light, suitable for general illumination or creating a comfortable ambiance.
Image: This image shows an indoor setting, specifically a living room corner, illuminated by the flood light set to 2700K warm white, creating a comfortable and inviting atmosphere.
Maintenance
Cleaning
To maintain optimal performance and appearance, periodically clean the flood light's surface with a soft, damp cloth. Do not use abrasive cleaners or solvents.
Water Resistance
The Olafus 40W RGB LED Flood Light has an IP66 waterproof rating, meaning it is protected against dust ingress and powerful water jets. It is suitable for outdoor use in various weather conditions, including rain and snow.
Image: This close-up image shows the flood light placed in wet grass, with water droplets visible on its surface, emphasizing its IP66 waterproof and weather-resistant design.
Troubleshooting
| Problem | Possible Cause | Solution |
|---|---|---|
| Light does not turn on. | No power supply. | Check if the power cord is securely plugged into a working outlet. |
| Remote control not working. | Battery depleted or incorrect orientation. Obstruction between remote and light. | Replace the remote control battery. Ensure the remote is pointed directly at the light's sensor without obstructions. |
| Inconsistent color changes or mode operation. | Interference or remote signal issue. | Ensure no other infrared devices are interfering. Try operating the remote closer to the light. |
Specifications
| Feature | Detail |
|---|---|
| Brand | Olafus |
| Model Number | LAA40GB |
| Wattage | 40 Watts |
| Light Color | RGB, 2700K Warm White |
| Brightness | 3200 Lumens |
| Voltage | 120 Volts |
| Control Method | Remote Control |
| Water Resistance Level | IP66 Waterproof |
| Material | Aluminum |
| Lifespan | Up to 30,000 hours |
| Dimensions (L x W x H) | 6.88" x 1.29" x 4.25" |
| Adjustable Angle | 180° |
Warranty
Olafus provides a 1-year warranty for this product from the date of purchase. This warranty covers manufacturing defects and material faults under normal use. It does not cover damage caused by improper installation, misuse, accidents, or unauthorized modifications. Please retain your proof of purchase for warranty claims.
Support
For technical assistance, warranty claims, or further inquiries, please contact Olafus customer support through the retailer's platform or visit the official Olafus website. Please have your model number (LAA40GB) and purchase information ready when contacting support.
