TTROARDS TT19 Foldable 4K Drone User Manual

1. Introduction

This user manual provides comprehensive instructions for the safe operation, maintenance, and troubleshooting of your TTROARDS TT19 Foldable 4K Drone. Please read this manual thoroughly before operating the drone to ensure proper function and to prevent damage or injury. Keep this manual for future reference.

2. Product Overview

2.1 Key Features

• 4K Camera with 90° Electric Adjustment: Captures high-resolution aerial footage with adjustable camera angle. Supports FPV real-time transmission via Wi-Fi.
• 270° Obstacle Avoidance: Advanced sensor system to detect and avoid obstacles, enhancing flight safety, especially for beginners.
• Brushless Motor & Level 3 Wind Resistance: Equipped with powerful brushless motors for stable, quiet flight and increased durability. Capable of resisting moderate winds.
• Optical Flow Positioning & Altitude Hold: Ensures precise hovering indoors and outdoors, maintaining a stable altitude for easier control and photography.
• Multiple Control Modes: Control via remote control or dedicated app, offering features like gravity sensing and trajectory flight.
• 3 Speed Modes: Adjustable flight speeds (low/medium/high) to suit different skill levels and environments.
• One-Key Take-off/Landing & 360° Flip: Simplified operations for beginners, including automated take-off/landing and acrobatic flips.
• Modular Battery: 1200mAh removable battery providing approximately 15 minutes of flight time, with low-voltage alerts.

2.2 Package Contents

Upon unboxing, please verify that all components listed below are present:

• 1x TTROARDS TT19 Drone
• 1x Remote Control
• 1x Modular Battery (1200mAh)
• 1x User Manual
• 1x Screwdriver
• 1x Carrying Case
• 1x Charging Cable
• 4x Propellers (spare)
• 4x Propeller Guards

2.3 Product Diagram

Figure 1: TTROARDS TT19 Drone, remote control, smartphone holder, and carrying case.

Figure 2: Close-up of the drone highlighting the 4K camera with dual camera capability and motorized adjustment.

Figure 3: The drone in flight, illustrating its 270-degree obstacle avoidance feature.

Figure 4: Diagram of the brushless motor and an image of the drone flying against a sunset, indicating Level 3 wind resistance.

Figure 5: The drone shown in three different flight positions, representing its 3 speed modes.

Figure 6: The drone depicted in a sequence of movements, illustrating its 360-degree flip capability.

Figure 7: The drone with its modular 1200mAh battery, indicating a 15-minute flight time.

3. Setup

3.1 Charging the Battery

1. Insert the modular battery into the drone or charge it externally using the provided charging cable.
2. Connect the charging cable to a USB power source (e.g., computer, USB wall adapter).
3. The indicator light on the battery will show charging status (refer to specific light patterns in the quick start guide if available). Charging typically takes 60-90 minutes.
4. Once fully charged, disconnect the cable.

3.2 Installing Propellers

Ensure propellers are installed correctly according to their markings (A and B) on the corresponding motor arms. Use the provided screwdriver to secure them firmly.

3.3 Remote Control Setup

1. Install 3x AAA batteries (not included) into the remote control.
2. Extend the phone holder on the remote control if you plan to use the app for FPV.

3.4 App Installation and Connection

1. Scan the QR code in the quick start guide or search for the "TTROARDS Drone" app in your device's app store.
2. Install the app on your smartphone.
3. Power on the drone and the remote control.
4. On your smartphone, connect to the drone's Wi-Fi network (usually named "TTROARDS-XXXXXX").
5. Open the app to establish a connection and view the live FPV feed.

4. Operating Instructions

4.1 Pre-Flight Checklist

• Ensure drone and remote control batteries are fully charged.
• Check that propellers are securely attached and undamaged.
• Select an open area free from obstacles, people, and animals.
• Verify Wi-Fi connection to the app (if using FPV).

4.2 Take-off and Landing

• One-Key Take-off: Place the drone on a flat, level surface. Press the One-Key Take-off button on the remote control or in the app. The drone will automatically ascend to a stable hovering height.
• Manual Take-off: Push both joysticks down and outwards simultaneously to start the motors. Slowly push the left joystick up to ascend.
• One-Key Landing: Press the One-Key Landing button. The drone will automatically descend and land.
• Manual Landing: Slowly pull the left joystick down to descend. Once landed, push both joysticks down and inwards to stop the motors.

4.3 Flight Controls

The TT19 drone offers various control methods:

• Left Joystick (Throttle/Yaw):
  • Up/Down: Ascend/Descend
  • Left/Right: Rotate Left/Right (Yaw)
• Right Joystick (Forward/Backward/Side-to-Side):
  • Up/Down: Fly Forward/Backward
  • Left/Right: Fly Left/Right (Strafe)
• Speed Modes: Press the speed button on the remote to cycle through Low, Medium, and High speeds.
• 360° Flip: While flying, press the 360° Flip button and then push the right joystick in the desired direction to perform a flip.
• Headless Mode: Activates a mode where the drone's orientation is relative to the pilot, simplifying control regardless of the drone's front direction.
• Optical Flow Positioning: Utilizes downward-facing sensors to maintain stable hovering, especially useful indoors or in areas with clear ground patterns.
• Altitude Hold: Automatically maintains the drone's current altitude, allowing the pilot to focus on directional control and camera operation.
• Gravity Control (App): In the app, enable gravity control to maneuver the drone by tilting your smartphone.
• Trajectory Flight (App): Draw a flight path on your smartphone screen within the app, and the drone will follow the designated route.

4.4 Camera Operation

• Photo/Video: Use the dedicated buttons on the remote control or within the app to capture photos or start/stop video recording.
• Camera Angle Adjustment: Use the designated button/dial on the remote control or app interface to adjust the 90° motorized camera angle.
• FPV (First Person View): The live video feed from the drone's camera will be displayed on your connected smartphone via the app.

5. Maintenance

5.1 Battery Care

• Always use the original charging cable.
• Do not overcharge or over-discharge the battery.
• Store batteries in a cool, dry place away from direct sunlight.
• If the drone will not be used for an extended period, charge the battery to approximately 50% before storage.

5.2 Propeller and Motor Maintenance

• Regularly inspect propellers for cracks, bends, or damage. Replace damaged propellers immediately.
• Keep motors free from dust, dirt, and debris. Use a soft, dry cloth to clean.

5.3 General Cleaning

Wipe the drone body with a soft, damp cloth. Avoid using harsh chemicals or solvents.

6. Troubleshooting

If you encounter issues not listed here or require further assistance, please contact customer support.

7. Specifications

8. Customer Support

For any questions, concerns, or technical assistance regarding your TTROARDS TT19 drone, please do not hesitate to contact our customer support team. We are committed to providing full support from take-off to landing.

Email: TTROAR_support@163.com

Please include your model number (TT19CS1) and a detailed description of your issue for faster service.