1. Safety Information
Please read and understand this entire manual before attempting to assemble, operate, or install the product. Failure to do so could lead to electric shock, fire, or serious injury.
- Ensure all electrical connections comply with local codes and ordinances, as well as the National Electrical Code (NEC).
- Consult a qualified electrician if you are unfamiliar with electrical wiring.
- Before installation, disconnect power by turning off the circuit breakers at the main fuse box.
- Use only E26 base bulbs, maximum 60W for incandescent or 10W for LED (bulbs not included).
- Do not operate the fan with damaged wiring or if the fan is visibly damaged.
2. Package Contents
Verify that all components are present before beginning installation:
- Fandelier Caged Ceiling Fan Assembly
- Remote Control (2 AAA batteries included)
- Mounting Bracket
- Down Rods (2 lengths provided)
- Hardware Pack (screws, wire nuts, etc.)
- Instruction Manual
3. Setup and Installation
This ceiling fan is designed for self-installation with detailed instructions provided in the included manual. Below is a general overview of the installation process.
- Power Disconnection: Turn off power at the circuit breaker before starting.
- Mounting Bracket Installation: Secure the mounting bracket to the ceiling junction box. Ensure it is firmly attached to a structural support capable of holding the fan's weight.
- Down Rod Selection: Choose the appropriate down rod length (4-inch or 8-inch) for your ceiling height. The fan is suitable for low, high, and sloping ceilings (up to 15 degrees).
- Wiring: Connect the fan's electrical wires to the household wiring according to the wiring diagram in the detailed manual. Use appropriate wire nuts.
- Fan Assembly: Attach the fan motor assembly to the down rod and then to the mounting bracket.
- Bulb Installation: Install four E26 base bulbs (not included) into the sockets.
- Power Restoration: Once installation is complete and all connections are secure, restore power at the circuit breaker.
Figure 1: Product Dimensions and Ceiling Compatibility. The fan measures 20 inches in diameter and 5.5 inches in height (excluding downrod). It can be installed with either a 4-inch or 8-inch downrod and is suitable for ceilings with a slope of up to 15 degrees.
4. Operating Instructions
The LEDIARY Fandelier is operated using the included remote control. Ensure the 2 AAA batteries are correctly installed in the remote.
- Power On/Off: Use the 'ON/OFF' button for lights and 'FAN OFF' for the fan.
- Fan Speed Adjustment: Select from 6 different wind speeds using the numbered buttons (1-6) on the remote.
- Seasonal Modes (Forward/Reverse):
- Summer Mode (Forward): Press the 'F' button. The fan blades rotate counter-clockwise, pushing cool air downwards.
- Winter Mode (Reverse): Press the 'R' button. The fan blades rotate clockwise, drawing cool air up and pushing warm air down to improve heat circulation.
- Timer Function: Set the fan to automatically turn off after 1, 2, 4, or 8 hours using the '1H', '2H', '4H', '8H' buttons.
- Beep Sound Control: The remote includes a button to eliminate the beeping sound for quiet operation.
Video 1: Demonstrates the remote control functions, including fan speed adjustments, seasonal modes (forward/reverse), and timer settings for the LEDIARY Fandelier.
Video 2: Illustrates the quiet operation of the LEDIARY Fandelier, showcasing minimal noise during fan use.
5. Maintenance
- Cleaning: To clean the fan, ensure power is off. Use a soft, damp cloth to wipe down the metal cage and fan blades. The design allows for easy access to the blades for cleaning. Avoid using abrasive cleaners.
- Bulb Replacement: Turn off power before replacing bulbs. This fan uses E26 standard base bulbs. Replace with bulbs of the same type and wattage (max 60W incandescent or 10W LED).
- General Inspection: Periodically check all connections and screws to ensure they are secure.
6. Troubleshooting
| Problem | Possible Cause | Solution |
|---|---|---|
| Fan does not operate | No power supply; Remote control batteries low/dead; Incorrect wiring. | Check circuit breaker; Replace remote batteries; Verify wiring connections. |
| Lights do not turn on | Bulbs are loose or burnt out; Incorrect wiring. | Tighten or replace bulbs; Verify wiring connections. |
| Fan makes excessive noise | Loose screws; Unbalanced blades; Motor issue. | Check and tighten all screws; Ensure blades are clean and balanced; Contact support if motor noise persists. |
| Remote control not responding | Batteries low/dead; Remote not paired; Obstruction. | Replace batteries; Re-pair remote (refer to detailed manual); Ensure clear line of sight to fan. |
For further assistance, please refer to the complete instruction manual or contact customer support.
7. Specifications
- Brand: LEDIARY
- Model Number: 5026a96d-e1ed-4c5a-aabb-b673425426d6
- Size: 20 Inch
- Product Dimensions: 20 x 20 x 7.8 inches
- Item Weight: 6.6 pounds
- Power Source: AC
- Wattage: 60 watts (max for lights)
- Bulb Base: E26 (bulbs not included)
- Number of Light Sources: 4
- Special Features: Remote Control, 6 Fan Speeds, Reversible Motor (Summer/Winter Mode), Timer Function (1/2/4/8H)
- Indoor/Outdoor Usage: Indoor, Outdoor (covered areas)
- Assembly Required: Yes
- Batteries: 2 AAA batteries required (included for remote)
8. Warranty and Support
The LEDIARY 20-Inch Fandelier Caged Ceiling Fan comes with a 2-year warranty.
For any issues or technical support, please contact LEDIARY customer service. We are committed to providing a response and solution within 24 hours.
For more information or to explore other LEDIARY products, visit the official LEDIARY Store.
