Introduction
Thank you for purchasing the Turtle Beach Afterglow Wave Wired RGB Gaming Controller. This controller is designed to enhance your gaming experience on Xbox Series X|S, Xbox One, and Windows 10 & 11 PCs with advanced features and customizable RGB lighting. Please read this manual thoroughly to ensure proper setup and operation.
Figure 1: Turtle Beach Afterglow Wave Wired RGB Gaming Controller (Black)
Package Contents
Ensure all items are present before proceeding with setup:
- Turtle Beach Afterglow Wave Controller
- 10’ / 3m USB-C Cable
- Quick Start Guide
Figure 2: Rear view of the controller highlighting the USB-C port and textured grips.
Setup
Connecting to Xbox Console or PC
- Locate the USB-C port on the top of your Turtle Beach Afterglow Wave Controller.
- Insert the smaller end of the included 10’ / 3m USB-C cable into the controller’s USB-C port.
- Insert the larger USB-A end of the cable into an available USB port on your Xbox Series X|S, Xbox One console, or Windows 10/11 PC.
- The controller will automatically power on and connect. The RGB lighting will illuminate, indicating a successful connection.
No additional drivers are typically required for basic functionality on supported platforms. For advanced customization, refer to the "Control Hub Companion App" section.
Operating the Controller
Hall-Effect 3-Stop Adjustable Triggers
The controller features Hall-Effect triggers with three adjustable stop positions. This allows you to fine-tune the trigger pull distance for different game genres, from full range for racing games to short pulls for rapid-fire actions in shooters.
- Locate the small switches on the underside of the controller, near the triggers.
- Toggle these switches to select your desired trigger throw distance.
Figure 3: Adjustable trigger stops on the underside of the controller.
Customizable RGB Lighting
The Afterglow Wave controller boasts 8 unique RGB lighting zones and 8 different preset modes. Adjust brightness and effects to personalize your gaming setup.
Figure 4: Customizable RGB lighting zones.
Two Mappable Quick-Action Buttons
Two additional buttons are located on the rear of the controller, providing quick access to essential commands. These buttons can be remapped using the Control Hub companion app.
Figure 5: Location of the two mappable quick-action buttons.
Patented Audio Controls
Adjust your game and chat audio directly from the controller using the D-pad controls. A dedicated mic mute button is also included for convenience.
- Game/Chat Mix: Use the D-pad to adjust the balance between game audio and chat audio.
- Master Volume: Control the overall volume level.
- Mic Mute: Press the dedicated button to mute or unmute your microphone.
Figure 6: On-board audio controls.
Immersive Feedback
Experience enhanced immersion with dual rumble motors and impulse triggers, providing responsive tactile feedback during gameplay.
Figure 7: Illustration of dual rumble motors and impulse triggers.
Control Hub Companion App
For extensive customization of your Afterglow Wave controller, download the Control Hub companion app. This app is available on Xbox consoles and Windows PCs.
App Features:
- Advanced lighting customization (effects, colors, brightness)
- Button remapping for quick-action buttons
- Controller configuration
- Diagnosis tools
Search for "Control Hub" in your console's store or the Microsoft Store on PC to download and install the application.
Figure 8: Control Hub app interface for customization.
Maintenance
To ensure the longevity and optimal performance of your controller, follow these maintenance guidelines:
- Cleaning: Use a soft, dry cloth to wipe down the controller. For stubborn dirt, slightly dampen the cloth with water. Avoid harsh chemicals or abrasive cleaners.
- Storage: Store the controller in a cool, dry place away from direct sunlight and extreme temperatures when not in use.
- Cable Care: Avoid sharp bends or kinks in the USB-C cable. Always grasp the plug, not the cable, when disconnecting.
- Ergonomics: The controller features an ergonomic design with laser-etched textured grips for comfortable, fatigue-free gaming sessions.
Figure 9: Ergonomic design for comfortable use.
Troubleshooting
| Problem | Possible Cause | Solution |
|---|---|---|
| Controller not responding/no power. | Loose cable connection, faulty USB port, or system issue. |
|
| RGB lighting not working or incorrect. | Software setting, or temporary glitch. |
|
| Buttons or sticks not responding correctly. | Software issue, or physical obstruction. |
|
Technical Specifications
- Product Weight: 0.30 kg / 0.66 lbs (10.56 ounces)
- Product Dimensions: 160 x 120 x 65 mm / 6.3” x 4.7” x 2.6”
- Connectivity: Wired USB-C (10 ft / 3m cable included)
- Compatibility: Xbox Series X|S, Xbox One, Windows 10 & 11 PCs
- Triggers: Hall-Effect 3-stop adjustable triggers
- Lighting: 8-zone customizable RGB lighting with 8 preset modes
- Buttons: Two mappable quick-action buttons
- Audio: Patented D-pad audio controls (game/chat mix, master volume, mic mute)
- Feedback: Dual rumble motors and impulse triggers
Warranty and Support
For warranty information and technical support, please visit the official Turtle Beach support website or refer to the warranty card included with your product. You can also find frequently asked questions and additional resources online.
Official Turtle Beach Support: www.turtlebeach.com/support
