1. Introduction
Thank you for choosing the HAVIT F2093 Computer Fan Hub. This device is designed to enhance your computer's cooling performance and aesthetic appeal by providing centralized control over up to six PWM (Pulse Width Modulation) fans and addressable RGB lighting. With its efficient SATA power connection and convenient 21-key remote control, managing your PC's thermal and lighting setup becomes straightforward.
Please read this manual thoroughly before installation and operation to ensure proper usage and to maximize the lifespan of your product.
2. Product Overview
The HAVIT F2093 Fan Hub acts as a central control unit for your computer's cooling fans and RGB lighting. It connects directly to your power supply via a SATA connector, ensuring stable power delivery for all connected components.
Key Features:
- Supports up to 6 PWM (4-pin) fans for precise speed control.
- Supports up to 6 addressable RGB fans for customizable lighting effects.
- Efficient and stable power delivery via SATA connection.
- Includes a 21-key remote control for convenient fan speed and RGB lighting adjustments.
Package Contents:
- 1 x HAVIT F2093 Computer Fan Hub
- 1 x 21-Key Remote Control
Image 1: The HAVIT F2093 Computer Fan Hub and its accompanying 21-key remote control. The hub features multiple ports for fan and RGB connections, while the remote allows for wireless adjustments.
3. Setup Instructions
Follow these steps to properly install your HAVIT F2093 Fan Hub:
- Prepare Your PC Case: Ensure your computer is powered off and unplugged from the wall outlet. Open your PC case to access the internal components.
- Mount the Fan Hub: Choose a suitable location within your PC case for the fan hub. It is recommended to place it in an area that allows for easy cable management and access to fan and RGB connections. The hub can be mounted using double-sided adhesive tape (not included) or screws (not included) if your case has appropriate mounting points.
- Connect SATA Power: Locate an available SATA power connector from your power supply unit (PSU). Connect this SATA power cable securely to the SATA power input port on the HAVIT F2093 Fan Hub. This connection is crucial for providing power to both the fans and the RGB lighting.
- Connect PWM Fans: Connect your 4-pin PWM fans to the designated fan ports on the hub. The hub supports up to six PWM fans. Ensure each fan connector is inserted correctly and fully seated.
- Connect Addressable RGB Cables: If your fans or other components have addressable RGB lighting, connect their 3-pin or 4-pin RGB cables to the corresponding RGB ports on the hub. Ensure the orientation of the RGB connector matches the hub's pins to avoid damage. The hub supports up to six addressable RGB devices.
- Cable Management: Route all cables neatly to ensure proper airflow within your PC case and to prevent interference with other components.
- Close PC Case: Once all connections are secure and cables are managed, close your PC case and reconnect the power cable.
4. Operating Instructions
The HAVIT F2093 Fan Hub is controlled using the included 21-key remote control. Ensure the remote has a working battery (typically CR2025 or CR2032, not always included) before use.
Fan Speed Control (PWM):
The remote allows you to adjust the speed of all connected PWM fans simultaneously. Look for buttons labeled with fan icons or speed indicators (e.g., 'FAN SPEED +', 'FAN SPEED -', 'AUTO', 'MAX', 'MIN').
- Increase Fan Speed: Press the designated button to increase fan RPM, providing more airflow for cooling.
- Decrease Fan Speed: Press the designated button to reduce fan RPM, minimizing noise.
- Automatic Mode: Some remotes may offer an 'AUTO' mode, allowing the hub to adjust fan speeds based on temperature (requires motherboard PWM signal passthrough, if supported by the hub).
- Maximum/Minimum Speed: Dedicated buttons might set fans to their highest or lowest possible speeds.
RGB Lighting Customization:
The 21-key remote provides extensive control over the addressable RGB lighting effects of your connected fans.
- Color Selection: Use the color palette buttons to select static colors.
- Lighting Modes: Cycle through various dynamic lighting effects such as breathing, pulsing, rainbow, or sequential patterns. Buttons may be labeled 'MODE', 'EFFECT', or similar.
- Brightness Adjustment: Increase or decrease the brightness of the RGB lighting.
- Speed of Effects: Adjust the speed of dynamic lighting effects.
- On/Off: Turn the RGB lighting on or off.
5. Maintenance
Regular maintenance helps ensure optimal performance and longevity of your HAVIT F2093 Fan Hub and connected components.
- Dust Removal: Periodically open your PC case and use compressed air to gently remove dust accumulation from the fan hub, fans, and other internal components. Dust can impede airflow and lead to overheating.
- Cable Inspection: Occasionally check all connections to the fan hub (SATA power, fan cables, RGB cables) to ensure they are secure and free from damage.
- Remote Control Battery: If the remote control becomes unresponsive, replace its battery. Refer to the remote's casing for the correct battery type (e.g., CR2025, CR2032).
6. Troubleshooting
If you encounter issues with your HAVIT F2093 Fan Hub, refer to the following common problems and solutions:
| Problem | Possible Cause | Solution |
|---|---|---|
| Fans not spinning | No power to hub; Loose fan connection; Faulty fan. | Ensure SATA power cable is securely connected to the hub and PSU. Check all fan connections to the hub. Test fans individually if possible. |
| RGB lighting not working | Loose RGB connection; Incorrect RGB header type; Faulty RGB device. | Verify RGB cables are correctly connected to the hub with proper orientation. Ensure your RGB devices are addressable (3-pin) if connected to an ARGB port. |
| Remote control unresponsive | Dead battery; Obstruction between remote and hub sensor. | Replace the remote control battery. Ensure there is a clear line of sight between the remote and the hub's IR receiver (if applicable). |
| Fans always run at full speed | PWM signal not detected; Hub in default mode. | Ensure fans are 4-pin PWM type. Use the remote to adjust fan speed. Check if the hub requires a specific connection to the motherboard for PWM signal. |
7. Specifications
| Model Number | F2093 |
| Brand | HAVIT |
| Color | Black |
| Material | Plastic |
| Item Weight | 360 grams |
| Number of Items | 1 (Fan Hub) |
| Dimensions (L x W x H) | 12.3 x 7.1 x 3.3 cm |
| Power Connector | SATA |
| Fan Ports | Up to 6 (4-pin PWM) |
| RGB Ports | Up to 6 (Addressable RGB) |
| Control Method | 21-Key Remote Control |
| Country of Origin | China |
8. Warranty and Support
For warranty information, please refer to the documentation provided at the time of purchase or visit the official HAVIT website. This manual does not contain specific warranty details.
If you require technical assistance or have questions regarding your HAVIT F2093 Computer Fan Hub, please contact HAVIT customer support through their official channels. Keep your purchase receipt or proof of purchase handy when contacting support.
