Introduction
Thank you for choosing the Herture 20-29 Gallon Fish Tank Stand. This manual provides essential information for the safe assembly, operation, and maintenance of your new aquarium stand. Please read these instructions carefully before beginning assembly and retain them for future reference.
Safety Warning: Always ensure the stand is placed on a level, stable surface. Do not exceed the maximum weight capacity. Improper assembly or overloading can result in injury or damage.
Package Contents
Before assembly, verify that all components listed below are present and undamaged. If any parts are missing or damaged, please contact customer support.
- 1 x Fish Tank Stand (disassembled components)
- 1 x Accessory Kit (screws, connectors, tools)
- 1 x Instructions Manual (this document)
Setup and Assembly
Assembly is required for this product. Follow the steps below carefully. It is recommended to assemble the stand with another person for ease and safety.
- Unpack Components: Carefully remove all parts from the packaging. Lay them out on a clean, soft surface to prevent scratches.
- Identify Parts: Refer to the included parts diagram (if available in the physical manual) to identify each component.
- Assemble Frame: Begin by connecting the metal frame components using the provided screws and tools. Ensure all connections are secure but do not overtighten initially.
- Attach Panels: Secure the particleboard panels to the metal frame. Pay attention to the orientation of the panels, especially the cabinet door and shelves.
- Install Cabinet Door: Attach the cabinet door using the hinges provided. Ensure it opens and closes smoothly.
- Insert Shelves: Place the adjustable shelves into the designated slots within the cabinet and open shelving area.
- Final Tightening: Once all components are in place, systematically tighten all screws to ensure maximum stability. Do not overtighten.
- Adjust Feet: The stand is equipped with adjustable feet. Place the stand in its desired location and adjust the feet to ensure the stand is perfectly level. This is crucial for the stability of your aquarium.
Operating Instructions
Proper placement and usage are key to the longevity and safety of your aquarium setup.
Placement
- Place the stand on a flat, level, and sturdy floor surface. Use the adjustable feet to compensate for any unevenness.
- Ensure the location is away from direct sunlight, heat sources, and areas with high foot traffic to minimize disturbance to your aquatic environment.
- Verify that the floor can support the combined weight of the stand, your aquarium (filled with water, substrate, and decorations), and any accessories.
Aquarium Compatibility
This stand is designed to accommodate fish tanks ranging from 20 to 29 gallons on its top surface. The tabletop dimensions are 31.49" L x 15.74" W.
The bottom right compartment is suitable for holding a small 5-gallon fish tank, allowing for a multi-tank setup.
Storage Functionality
The stand features a cabinet on the left and open shelves on the right, providing versatile storage options.
- Cabinet Storage: The enclosed cabinet is ideal for storing larger equipment such as canister filters or CO2 systems. The internal shelf can be removed to accommodate taller items.
- Open Shelves: The right-side shelves are perfect for organizing fish food, nets, water conditioners, testing kits, and other frequently accessed supplies.
- Cable Management: A round hole is located at the back of the stand to facilitate organized routing of power cords and hoses, maintaining a tidy appearance.
Maintenance
Regular maintenance will help preserve the appearance and structural integrity of your stand.
- Cleaning: Wipe surfaces with a soft, damp cloth. Avoid abrasive cleaners or harsh chemicals, as these can damage the finish.
- Spills: Immediately wipe up any water spills to prevent moisture damage to the particleboard components.
- Stability Check: Periodically check all screws and connections to ensure they remain tight. Re-tighten if necessary. Verify the stand remains level using the adjustable feet.
Troubleshooting
If you encounter issues with your Herture Fish Tank Stand, refer to the following common solutions:
- Wobbling Stand: Ensure the stand is on a level surface. Adjust the leveling feet at the bottom of the stand until it is stable and does not wobble. Check all assembly screws for tightness.
- Difficulty with Assembly: Review the assembly instructions carefully. Ensure all parts are correctly oriented and that the correct hardware is used for each step. Do not force components together.
- Damaged or Missing Parts: If you received damaged parts or find that components are missing, please contact Herture customer service directly for assistance.
Specifications
| Feature | Detail |
|---|---|
| Model | PG07YGN |
| Dimensions (L x W x H) | 31.49 x 15.74 x 31.49 inches (80 x 40 x 80 cm) |
| Material | Engineered Wood, Metal |
| Color | Rustic Brown |
| Max. Static Load Capacity (Top) | 330 lbs (150 kg) |
| Max. Static Load Capacity (Bottom) | 110 lbs (50 kg) |
| Recommended Tank Size (Top) | 20-29 Gallons |
| Recommended Tank Size (Bottom) | 5 Gallons (small tank) |
| Assembly Required | Yes |
Warranty and Support
Herture is committed to providing quality products. If you encounter any issues with your product or require assistance, please contact Herture customer service through the platform where you made your purchase. Please have your model number (PG07YGN) and purchase details ready when contacting support.
