1. Introduction
The BWT ES 800 Pool Robot is an advanced automatic pool cleaner designed for efficient and thorough cleaning of residential pools up to 10 meters in length. Its compact and modern design, combined with intelligent navigation and powerful cleaning capabilities, ensures a pristine swimming environment.
This manual provides essential information for the safe and effective operation, maintenance, and troubleshooting of your BWT ES 800 Pool Robot. Please read it carefully before first use and keep it for future reference.
2. Product Overview
Figure 2.1: Angled front view of the BWT ES 800 Pool Robot, showcasing its compact design and front brushes.
Figure 2.2: Front view of the BWT ES 800 Pool Robot, highlighting the cleaning brushes.
Figure 2.3: Diagram showing key features: app control, cleaning areas (floor, walls, waterline), intelligent navigation, and gyroscopic system.
Figure 2.4: Top view of the BWT ES 800 Pool Robot, showing the handle and cable connection point.
Key Features:
- Modern & Compact Design: Dimensions of 39.5 x 36.5 x 20 cm.
- Powerful & Efficient Cleaning: Cleans pool floor, walls, and waterline.
- Flexible Cleaning Cycles: Selectable cycles of 1.5h, 2.0h, or 2.5h.
- Optimized Cleaning: Equipped with PVC brushes and a 100µ filter with 3.3L capacity.
- Intelligent Control: App-integrated control for remote operation.
- Precise Navigation: Gyroscopic navigation system for optimal coverage.
- Enhanced Maneuverability: Features Gencore 7 electronic Swivel.
- Durable: Includes an 18m cable and a 3-year warranty.
3. Setup and Installation
3.1 Unpacking
Carefully remove the BWT ES 800 Pool Robot and all accessories from the packaging. Verify that all components are present:
- BWT ES 800 Pool Robot unit
- Control unit/power supply
- 18m floating cable
- User manual
3.2 Initial Placement
- Place the control unit at least 3.5 meters (11.5 feet) from the edge of the pool. Ensure it is protected from direct sunlight and rain.
- Uncoil the floating cable completely before placing the robot in the pool to prevent tangling.
- Gently lower the robot into the pool. Allow it to sink to the bottom, releasing any trapped air bubbles.
- Connect the floating cable to the control unit, ensuring a secure connection.
- Plug the control unit into a grounded electrical outlet.
3.3 App Connection (Optional)
For remote control and advanced features, download the official BWT app from your device's app store. Follow the in-app instructions to pair your BWT ES 800 Pool Robot with your smartphone or tablet.
4. Operating Instructions
4.1 Starting a Cleaning Cycle
- Ensure the robot is fully submerged and the cable is untangled.
- On the control unit, select your desired cleaning cycle duration: 1.5 hours, 2.0 hours, or 2.5 hours.
- Press the START button. The robot will begin its cleaning cycle, automatically navigating the pool floor, walls, and waterline.
- Alternatively, use the BWT app to initiate and customize cleaning cycles.
4.2 Stopping a Cleaning Cycle
The robot will automatically stop at the end of its programmed cycle. To stop it manually, press the STOP button on the control unit or via the app.
4.3 Removing the Robot from the Pool
- Disconnect the control unit from the power outlet.
- Gently pull the floating cable to bring the robot to the edge of the pool.
- Use the handle on the robot to lift it out of the water. Allow excess water to drain from the unit.
- Do not pull the robot out of the water by its cable.
5. Maintenance
5.1 Cleaning the Filter
Regular filter cleaning is crucial for optimal performance. Clean the filter after each cleaning cycle or as needed.
- Ensure the robot is disconnected from power.
- Locate the filter compartment (refer to Figure 2.4 for top view).
- Open the filter compartment and remove the 100µ filter basket.
- Empty debris from the basket. Rinse the filter thoroughly with a garden hose until all dirt and debris are removed.
- Reinsert the clean filter basket into the compartment and close it securely.
5.2 Brush Inspection
Periodically inspect the PVC brushes for wear or damage. Replace them if they show significant signs of deterioration to maintain effective cleaning.
5.3 Cable Management
After each use, gently coil the floating cable to prevent kinks and tangles, which can affect the robot's movement and lifespan of the cable.
5.4 Storage
When not in use for extended periods, store the robot in a cool, dry place, away from direct sunlight and extreme temperatures. Ensure the filter is clean and dry before storage.
6. Troubleshooting
| Problem | Possible Cause | Solution |
|---|---|---|
| Robot does not start. | Not plugged in; power outage; cable not connected securely. | Check power connection; verify outlet functionality; ensure cable is firmly connected to control unit. |
| Poor cleaning performance. | Clogged filter; worn brushes; too much debris in pool. | Clean filter basket; inspect and replace brushes if necessary; manually remove large debris before cleaning. |
| Robot gets stuck or moves erratically. | Tangled cable; obstruction in pool; air trapped in robot. | Untangle cable; remove pool toys or large debris; gently shake robot underwater to release air. |
| App connection issues. | Bluetooth/Wi-Fi interference; app not updated; robot not in pairing mode. | Ensure robot is powered on; restart app and robot; check app for updates; refer to app's pairing guide. |
If problems persist after attempting these solutions, please contact BWT customer support.
7. Specifications
- Model: BWT ES 800
- Reference Number: 125663108
- Dimensions (L x W x H): 39.5 x 36.5 x 20 cm (15.55 x 14.37 x 7.87 inches)
- Weight: 5.75 kg (12.68 lbs)
- Power Source: AC
- Recommended Pool Length: Up to 10 meters (33 feet)
- Cleaning Cycles: 1.5h, 2.0h, 2.5h
- Filter Fineness: 100µ (microns)
- Filter Capacity: 3.3 liters
- Cable Length: 18 meters (59 feet)
- Navigation: Gyroscopic
- Control: Integrated App Control
8. Warranty and Support
8.1 Warranty Information
The BWT ES 800 Pool Robot comes with a 3-year warranty from the date of purchase. This warranty covers manufacturing defects and malfunctions under normal use conditions. Please retain your proof of purchase for warranty claims.
The warranty does not cover damage caused by improper use, neglect, accidents, unauthorized repairs, or normal wear and tear of consumable parts (e.g., brushes, filters).
8.2 Customer Support
For technical assistance, warranty claims, or spare parts inquiries, please contact BWT customer support. Visit the official BWT website for contact details specific to your region.
Online Resources: www.bwt.com
9. Important Safety Information
Always follow basic safety precautions when operating electrical appliances, especially near water. Read all instructions before use.
- Do not operate the robot if the cable is damaged.
- Ensure the power outlet is grounded and protected by a Residual Current Device (RCD).
- Do not enter the pool while the robot is operating.
- Always disconnect the power supply before performing any maintenance or cleaning.
- Keep children and pets away from the robot during operation.
10. Official Product Videos
No official product videos with "creator_type":"Seller" and relevant content were found in the provided data to embed. Please refer to the manufacturer's official website for any available video resources.
