Alloyman 12V 3/8-inch Cordless Electric Ratchet Wrench Set Instruction Manual

1. Safety Information

Read all safety warnings, instructions, illustrations, and specifications provided with this power tool. Failure to follow all instructions listed below may result in electric shock, fire, and/or serious injury.

General Power Tool Safety Warnings:

• Work Area Safety: Keep work area clean and well-lit. Cluttered or dark areas invite accidents. Do not operate power tools in explosive atmospheres, such as in the presence of flammable liquids, gases, or dust. Power tools create sparks which may ignite the dust or fumes.
• Electrical Safety: Power tool plugs must match the outlet. Never modify the plug in any way. Do not use any adapter plugs with earthed (grounded) power tools. Unmodified plugs and matching outlets will reduce risk of electric shock.
• Personal Safety: Always wear eye protection. Use appropriate safety equipment such as dust masks, non-skid safety shoes, hard hats, or hearing protection for relevant conditions. Stay alert, watch what you are doing, and use common sense when operating a power tool.
• Tool Use and Care: Do not force the power tool. Use the correct power tool for your application. It will do the job better and safer at the rate for which it was designed. Disconnect the plug from the power source and/or remove the battery pack, if detachable, from the power tool before making any adjustments, changing accessories, or storing power tools.
• Battery Tool Use and Care: Recharge only with the charger specified by the manufacturer. A charger that is suitable for one type of battery pack may create a risk of fire when used with another battery pack. Use power tools only with specifically designated battery packs. Use of any other battery packs may create a risk of injury and fire.

2. Package Contents

Verify that all items listed below are present and in good condition upon opening the package.

• 1 x Alloyman 3/8-inch Cordless Electric Ratchet Wrench
• 2 x 12V 2.0Ah Power Batteries
• 1 x Battery Charger
• 6 x Sockets (10mm, 12mm, 13mm, 14mm, 15mm, 17mm)
• 1 x 3-inch Extension Rod
• 1 x 1/4-inch Drive Adapter
• 1 x 1/2-inch Drive Adapter
• 1 x User Manual
• 1 x Storage Case

3. Product Features

• Extended Reinforced Alloy Head: Features a 5.5-inch long neck profile and an ultra-slim 3/8-inch compact head for accessing tight spaces. The head is constructed from steel alloy for enhanced durability and impact resistance.
• High Torque Output: Delivers up to 60 ft-lbs (80 Nm) of torque, suitable for tightening and loosening most nuts and bolts.
• Powerful 12V Motor: Equipped with a 12V pure copper motor for efficient performance.
• Variable Speed Trigger: Allows for precise speed control from 0 to 250 RPM based on trigger pressure.
• Long-lasting Batteries: Includes two 12V 2.0Ah rechargeable lithium-ion batteries, designed for extended use and 500 charge cycles.
• Built-in LED Light: Illuminates the work area for improved visibility in dark or confined spaces.
• Battery Power Indicator: Displays the remaining battery charge level, allowing for timely recharging.
• Ergonomic Soft Grip: Designed for comfortable handling and reduced hand fatigue during prolonged use.
• Forward/Reverse Switch: Easily switch between tightening and loosening modes.

4. Setup

4.1 Charging the Battery

Before first use, fully charge both 12V 2.0Ah batteries. Connect the charger to a standard power outlet and insert the battery pack. The charger indicator light will show the charging status (e.g., red for charging, green for fully charged). Ensure the battery is securely seated in the charger.

4.2 Attaching Sockets and Adapters

1. Ensure the ratchet wrench is turned off and the battery is removed before attaching or detaching accessories.
2. Select the appropriate socket size (10mm, 12mm, 13mm, 14mm, 15mm, 17mm) or drive adapter (1/4-inch, 1/2-inch) for your task.
3. Align the square drive of the socket or adapter with the square drive on the ratchet head.
4. Push the socket/adapter firmly onto the drive until it clicks into place, ensuring it is securely fastened.
5. To use the 3-inch extension rod, attach it to the ratchet head first, then attach the desired socket to the extension rod.

5. Operating Instructions

5.1 Installing the Battery

Slide a charged 12V battery pack into the base of the ratchet wrench handle until it locks securely into place. Ensure it is fully seated to prevent accidental disconnection during operation.

5.2 Powering On and Off

The tool is activated by pressing the variable speed trigger. Release the trigger to turn the tool off.

5.3 Variable Speed Control

The speed of the ratchet wrench is controlled by the amount of pressure applied to the trigger. A lighter press results in lower RPM, while a firmer press increases the speed up to 250 RPM. This allows for precise control depending on the application.

5.4 Forward/Reverse Operation

To change the direction of rotation, use the forward/reverse lever located on the head of the ratchet. Push the lever to the left for forward (tightening) and to the right for reverse (loosening). Always ensure the tool has come to a complete stop before changing direction.

5.5 Using the LED Work Light

The built-in LED light automatically illuminates when the trigger is pressed, providing visibility in dimly lit work areas. This feature is particularly useful when working in engine bays or other confined spaces.

5.6 Battery Indicator

The battery indicator lights on the tool provide a visual representation of the remaining battery charge:

• Green: 80% - 100% charge
• Yellow: 50% - 80% charge
• Red: Below 50% charge (recharge soon)

6. Maintenance

6.1 Cleaning

Regularly clean the tool's exterior with a soft, damp cloth. Do not use harsh chemicals or abrasive cleaners. Keep ventilation openings clear of dust and debris to prevent overheating.

6.2 Battery Care and Storage

• Store batteries in a cool, dry place away from direct sunlight and extreme temperatures.
• Do not store batteries in a discharged state for extended periods. Recharge them periodically if not in use.
• Protect batteries from physical damage.

6.3 General Inspection

Periodically inspect the tool for any signs of damage, loose parts, or wear. If any issues are found, discontinue use and contact customer support for assistance.

7. Troubleshooting

If the problem persists after attempting these solutions, please contact Alloyman customer support.

8. Specifications

9. Warranty and Support

Alloyman provides a warranty of up to 365 days for this product. If you encounter any issues with your Alloyman 12V 3/8-inch Cordless Electric Ratchet Wrench Set within this period, please contact our customer support team.

For warranty claims, technical assistance, or any other inquiries, please refer to the contact information provided in your product packaging or visit the official Alloyman website.

Please have your model number (12vRED) and purchase details ready when contacting support.

10. Product Video Demonstration