Acer 27-inch IPS FHD Monitor User Manual

1. Introduction

This manual provides essential information for the proper setup, operation, and maintenance of your Acer 27-inch IPS FHD Monitor. Please read this guide thoroughly before using the product to ensure optimal performance and safety. This monitor features a 27-inch Full HD (1920x1080) IPS display, 100Hz refresh rate, 4ms response time, AMD FreeSync technology, VESA mount compatibility, and includes a Dockztorm USB Port Expander.

Image 1.1: Front view of the Acer 27-inch IPS FHD Monitor, showcasing its slim bezels and the included Dockztorm USB Port Expander.

2. Safety Information

Observe the following safety precautions to prevent damage to the monitor and ensure user safety:

• Do not expose the monitor to rain or moisture.
• Do not open the monitor casing; refer all servicing to qualified personnel.
• Place the monitor on a stable, flat surface to prevent it from falling.
• Ensure proper ventilation around the monitor to prevent overheating.
• Use only the power adapter and cables supplied with the monitor.
• Disconnect the power cord from the outlet during lightning storms or when unused for long periods.

3. Package Contents

Verify that all items are present in the package:

• Acer 27-inch IPS FHD Monitor
• Monitor Stand (Base and Neck)
• Power Cord
• HDMI Cable
• Dockztorm USB Port Expander
• User Manual (this document)

4. Setup

4.1. Assembling the Monitor Stand

1. Carefully place the monitor face down on a soft, clean surface to prevent scratches.
2. Attach the stand neck to the back of the monitor until it clicks into place or is secured with screws (if applicable).
3. Attach the stand base to the neck and secure it with the captive screw at the bottom of the base.

4.2. VESA Wall Mounting (Optional)

The monitor supports VESA mounting standard 100 x 100 mm. To mount the monitor on a wall or an articulating arm:

1. Remove the stand from the monitor by pressing the release button or unscrewing it.
2. Attach your VESA-compatible mounting bracket to the four screw holes on the back of the monitor. Refer to your VESA mount's instructions for specific details.

Image 4.1: Rear view of the Acer monitor, highlighting the VESA mounting holes and input ports.

4.3. Connecting Cables

Connect the necessary cables to the monitor and your computer:

• Power: Connect the power cord to the monitor's power input and then to a power outlet.
• Video Input: Connect an HDMI cable from your computer's HDMI output to the monitor's HDMI 1.4 port, or a VGA cable from your computer's VGA output to the monitor's VGA port.
• Dockztorm USB Port Expander: Connect the Dockztorm USB Port Expander to an available USB port on your computer. This device provides super speedy data sync rates up to 5Gbps.

5. Operating Instructions

5.1. Power On/Off

Press the power button, usually located on the bottom right or rear of the monitor, to turn the monitor on or off. The power indicator light will illuminate when the monitor is on.

5.2. On-Screen Display (OSD) Menu

The OSD menu allows you to adjust various monitor settings. Use the buttons on the monitor (typically located on the bottom edge or rear) to navigate the menu:

• Press a menu button to open the OSD.
• Use the navigation buttons (up/down/left/right) to select options.
• Press the select/enter button to confirm a selection.
• Press the exit button to close the OSD.

5.3. Display Settings

• Resolution: The native resolution is 1920 x 1080 (FHD). For optimal image quality, set your computer's display resolution to match this.
• Refresh Rate: The monitor supports a 100Hz refresh rate. Ensure your graphics card and operating system are configured to utilize this setting for smoother visuals.
• AMD FreeSync: This technology synchronizes the monitor's refresh rate with your graphics card's frame rate to eliminate screen tearing and stuttering. Enable FreeSync in your graphics card's control panel.
• Brightness: Adjust the brightness (up to 250 nits) via the OSD menu to suit your viewing environment.
• Tilt Adjustment: The monitor stand allows for a tilt adjustment range of -5 to +25 degrees. Gently adjust the monitor panel to your preferred viewing angle.

5.4. Eye Protection Features

Your Acer monitor incorporates VisionCare technologies designed to reduce eye strain:

• Acer BlueLightShield: Reduces harmful blue light emissions.
• Flickerless: Eliminates screen flickering for more comfortable viewing.
• Low-dimming: Allows for very low brightness levels in dark environments.
• ComfyView: Reduces reflections from ambient light.

These features can typically be enabled or adjusted through the OSD menu.

6. Maintenance

6.1. Cleaning the Monitor

• Always unplug the monitor before cleaning.
• Use a soft, lint-free cloth lightly dampened with water or a non-abrasive screen cleaner to wipe the screen.
• For the monitor casing, use a soft, dry cloth. Avoid using harsh chemicals or abrasive materials.

6.2. Storage

If storing the monitor for an extended period, disconnect all cables, pack it in its original packaging (if available), and store it in a cool, dry place away from direct sunlight and extreme temperatures.

7. Troubleshooting

If you encounter issues with your monitor, refer to the following common problems and solutions:

8. Specifications

Detailed technical specifications for the Acer 27-inch IPS FHD Monitor:

• Screen Size: 27 Inches
• Panel Type: IPS
• Resolution: 1920 x 1080 (FHD 1080p)
• Aspect Ratio: 16:9
• Refresh Rate: 100Hz
• Response Time: 4ms RT
• Brightness: 250 nits
• Video Inputs: 1 x HDMI 1.4, 1 x VGA
• Tilt Adjustment: -5 to +25 degrees
• VESA Mount: 100 x 100 mm
• Eye Protection: Acer VisionCare (BlueLightShield, Flickerless, Low-dimming, ComfyView)
• Special Features: AMD FreeSync, Anti-glare, 3-Sided Micro-Edge Bezel
• Product Dimensions: 2.6 x 24.1 x 17.9 inches
• Item Weight: 9.57 pounds

9. Warranty and Support

Your Acer monitor is covered by a manufacturer's warranty. For specific warranty terms and conditions, please refer to the warranty card included with your product or visit the official Acer support website. For technical assistance, troubleshooting, or service inquiries, please contact Acer customer support through their official channels.

Online Support: www.acer.com/support