1. Introduction
This manual provides detailed instructions for the safe and efficient use of your LGIDTECH B6 Miboxer SPI Panel Remote Controller. Please read this manual thoroughly before operating the device and retain it for future reference.
Product Overview
The LGIDTECH B6 is a dedicated SPI panel remote controller designed to manage SPI series LED strip lights. It offers comprehensive control over color, brightness, dynamic modes, speed, and scene saving for compatible LED strip controllers like the SPIR3 and SPIR3-M.
Figure 1: LGIDTECH B6 Miboxer SPI Panel Remote Controller.
2. Package Contents
Upon unpacking, please verify that all items listed below are present and in good condition:
- LGIDTECH B6 SPI Panel Remote Controller
- User Manual (this document)
Note: AAA batteries (2 pcs) are required for operation and are not included in the package.
Figure 2: Package contents of the LGIDTECH B6 remote controller.
3. Setup
3.1 Battery Installation
- Locate the battery compartment cover on the back of the remote controller.
- Slide or unclip the cover to open the compartment.
- Insert two (2) AAA batteries, ensuring correct polarity (+ and -) as indicated inside the compartment.
- Replace the battery compartment cover until it clicks securely into place.
3.2 Pairing with SPI LED Strip Controller
The LGIDTECH B6 remote is designed to control specific SPI LED strip controllers such as the SPIR3 and SPIR3-M. Refer to the instruction manual of your SPI LED strip controller for specific pairing procedures. Generally, pairing involves putting the controller into a pairing mode and then initiating a pairing command from the remote.
4. Operating Instructions
This section details the functions of each button and indicator on the LGIDTECH B6 remote controller.
4.1 Remote Layout and Indicators
The LGIDTECH B6 remote features a clear layout with dedicated buttons and indicators for various functions. The top section includes ON/OFF buttons. Below these are controls for Dynamic Mode (M) and Shift. The right side of the remote features indicators for RGB, RGBW, Pixel number, Speed, Scene 1, Scene 2, Scene 3, and Brightness, each with an associated control area.
4.2 Button Functions
| Button/Indicator | Function |
|---|---|
| ON | Turns the connected LED strip lights ON. |
| OFF | Turns the connected LED strip lights OFF. |
| M (Dynamic Mode) | Cycles through various dynamic lighting modes. |
| Shift (Circle Icon) |
|
| RGBW / RGB |
|
| Pixel Number | Adjusts the length or width (number of pixels) of the SPI strip. More information may be available in the settings menu of the connected controller. |
| Speed | Adjusts the speed of the current dynamic lighting mode. |
| Brightness | Dims or brightens the LED strip lights. |
| S1, S2, S3 (Scene Buttons) |
|
4.3 General Operation Tips
- Ensure the remote is within the effective control distance (up to 30 meters / 98 feet) of the SPI LED strip controller.
- Point the remote towards the controller for optimal signal transmission.
- The remote can control multiple compatible devices simultaneously.
5. Maintenance
- Cleaning: Wipe the remote controller with a soft, dry cloth. Do not use abrasive cleaners, solvents, or harsh chemicals.
- Battery Replacement: Replace batteries when the remote's performance degrades or it stops responding. Always replace both batteries at the same time with new ones of the same type.
- Storage: If not in use for an extended period, remove the batteries to prevent leakage and store the remote in a cool, dry place away from direct sunlight.
- Avoid Moisture: Do not expose the remote to water or high humidity.
- Avoid Extreme Temperatures: Do not expose the remote to extreme heat or cold.
6. Troubleshooting
| Problem | Possible Cause | Solution |
|---|---|---|
| Remote not responding |
|
|
| Limited control distance |
|
|
| LED strip not responding to specific commands |
|
|
7. Specifications
| Feature | Detail |
|---|---|
| Product Name | SPI Remote |
| Brand | LGIDTECH |
| Model | B6 |
| Working Voltage | 3V (AAA*2pcs, not included) |
| Standby Power Consumption | 15μA |
| Transmitting Power | 6dBm |
| Modulation Method | GFSK |
| Control Distance | 30 meters (98 feet) |
| Working Temperature | -10~40°C (14℉~104℉) |
| Color | White |
8. Warranty Information
Warranty information for the LGIDTECH B6 Miboxer SPI Panel Remote Controller was not provided in the product details. Please refer to the retailer or manufacturer's official website for warranty terms and conditions.
9. Customer Support
Customer support contact information for the LGIDTECH B6 Miboxer SPI Panel Remote Controller was not provided in the product details. For assistance, please contact your point of purchase or visit the LGIDTECH official website for support resources.