eeTao 24V Replacement Adapter for AIUZLK P260 Air Purifier

Introduction

This instruction manual provides essential information for the safe and effective use of your eeTao 24V Replacement Adapter. This adapter is specifically designed to be compatible with the AIUZLK P260 Air Purifier, model SG-240100024AU. Please read this manual thoroughly before use and retain it for future reference.

Image: The eeTao 24V Replacement Adapter is designed for compatibility with AIUZLK P260 Air Purifiers, available in both black and white models. The image illustrates the adapter's intended use with these air purifiers.

Safety Precautions

• Ensure the adapter is used only with compatible devices, specifically the AIUZLK P260 Air Purifier.
• Do not expose the adapter to water or excessive moisture.
• Avoid dropping or subjecting the adapter to severe impacts.
• Do not attempt to open or repair the adapter yourself. Refer to qualified service personnel.
• Keep out of reach of children.
• Always unplug the adapter from the power outlet when not in use for extended periods.

Image: This graphic highlights the built-in security features of the adapter, such as protection against over-voltage, over-current, short circuits, and temperature fluctuations, ensuring safe operation.

Setup

1. Inspect the Adapter: Before connecting, visually inspect the adapter and cable for any signs of damage.
2. Connect to Device: Insert the DC barrel connector of the adapter firmly into the power input port of your AIUZLK P260 Air Purifier.
3. Connect to Power Outlet: Plug the AC prongs of the adapter into a standard 100-240VAC 50/60Hz wall outlet.
4. Verify Connection: Ensure both connections are secure. The air purifier should now receive power.

Image: This image displays the eeTao 24V power adapter, showing its standard two-prong plug for AC input and the DC barrel connector for device connection.

Operating Instructions

Once properly connected, the eeTao 24V Replacement Adapter will provide the necessary DC 24V power to your AIUZLK P260 Air Purifier. The adapter operates automatically to deliver stable power. There are no user-adjustable settings on the adapter itself.

• The adapter is designed for continuous operation.
• Ensure adequate ventilation around the adapter to prevent overheating.
• If the air purifier does not power on, refer to the Troubleshooting section.

Image: This diagram illustrates the construction of the adapter's premium cable, featuring a coarsening core, inner insulation, and a TPE protective layer for durability and efficient power transmission.

Maintenance

The eeTao 24V Replacement Adapter requires minimal maintenance to ensure its longevity and optimal performance.

• Cleaning: Disconnect the adapter from the power outlet and the air purifier. Use a soft, dry cloth to wipe the exterior of the adapter. Do not use liquid cleaners or abrasive materials.
• Storage: When not in use, store the adapter in a cool, dry place, away from direct sunlight and extreme temperatures. Avoid tightly coiling the cable to prevent damage.
• Cable Care: Regularly check the cable for any kinks, cuts, or fraying. If any damage is observed, discontinue use immediately and replace the adapter.

Troubleshooting

If you encounter issues with your eeTao 24V Replacement Adapter, please refer to the following common problems and solutions:

Specifications

Warranty and Support

Your eeTao 24V Replacement Adapter comes with the following warranty and support:

• Warranty: 30 Days Refund, 24 Months Exchange.
• Customer Support: For any questions, concerns, or warranty claims, please contact eeTao customer service through the retailer where the product was purchased.