PXN-A11 Foldable Racing Simulator Steering Wheel Stand User Manual

Introduction

This manual provides essential information for the assembly, operation, maintenance, and troubleshooting of your PXN-A11 Foldable Racing Simulator Steering Wheel Stand. Please read these instructions carefully before use to ensure proper setup and safe operation. The PXN-A11 stand is designed to enhance your racing simulation experience by providing a stable and adjustable platform for various steering wheels, pedals, and shifters.

Note: This product includes the racing stand only. Game steering wheels, pedals, and shifters are sold separately and are not included.

Safety Information

• Ensure all components are securely fastened before use. Loose parts can cause instability and potential injury.
• Do not exceed the recommended weight capacity for attached peripherals.
• Keep hands and fingers clear of moving parts during adjustment or folding.
• Place the stand on a flat, stable surface to prevent tipping.
• Adult assembly is required.

Setup and Assembly

The PXN-A11 racing stand requires initial assembly. Follow the steps below for proper setup.

1. Unpacking and Component Identification

Carefully unpack all components and verify that all parts are present according to the packing list (not provided in this document, refer to your product packaging). Familiarize yourself with the base frame, main support arms, wheel plate, shifter plate, and pedal plate.

Image: The PXN-A11 Foldable Racing Simulator Steering Wheel Stand, shown without attached peripherals.

2. Frame Assembly

Assemble the main frame components, ensuring all bolts and knobs are tightened securely. The stand is constructed from high-quality carbon structural steel for stability.

3. Attaching Peripherals (Steering Wheel, Pedals, Shifter)

The PXN-A11 stand features a multi-hole design for broad compatibility with various racing peripherals. Identify the appropriate mounting holes for your specific equipment.

Image: Close-up view of the multi-hole design on the base plate, shifter plate, and pedal plate, indicating compatibility with various brands.

Image: Diagrams illustrating specific mounting patterns for PXN-V12, MOZA R3/R5, PXN-V10, Logitech G25/G27/G29/G923, Fanatec, Thrustmaster, and MOZA R9.

Secure your steering wheel to the wheel plate, pedals to the pedal plate, and shifter to the shifter plate using the provided hardware or hardware specific to your peripherals. Ensure all attachments are firm to prevent movement during gameplay.

Image: The PXN-A11 stand fully assembled with a racing wheel and pedal set mounted, ready for use.

Operating and Adjustments

The PXN-A11 stand offers multiple adjustment points to customize your racing setup for optimal comfort and performance.

1. Height Adjustment

The stand's height can be adjusted from 63.5 cm to 95 cm. Loosen the orange knobs on the main support arms, extend or retract the arms to your desired height, and then securely tighten the knobs. This allows accommodation for users of various heights.

Image: Illustration showing the adjustable stand height (63.5cm to 95cm) and the adjustable angle of the wheel plate for user comfort.

2. Pedal Angle Adjustment

The pedal plate supports three-stage adjustment, allowing an inclination range from 6.0° to 11.5°. Adjust the angle to align with your seating position for a comfortable driving experience.

3. Shifter Position

The shifter plate can be mounted on either the left or right side of the stand. This flexibility allows you to configure the setup according to your preferred driving style and handedness.

Image: The racing stand with a shifter mounted on both the left and right sides, demonstrating the flexible shifter design.

Maintenance

• Regularly check all bolts and fasteners to ensure they remain tight.
• Clean the stand with a soft, damp cloth. Avoid abrasive cleaners or solvents.
• Inspect the non-slip rubber pads on the base for wear and tear to maintain stability.

Troubleshooting

1. Stand Wobbles or is Unstable

• Ensure all assembly bolts and adjustment knobs are fully tightened.
• Verify the stand is placed on a flat, level surface.
• Check the condition of the non-slip rubber pads on the base.

2. Peripherals Do Not Fit Mounting Holes

• Refer to the compatibility diagrams in the Setup section to confirm your peripheral model is supported.
• Some peripherals may require specific mounting hardware not included with the stand.

3. Difficulty Folding the Stand

• Ensure all adjustment knobs are loosened sufficiently to allow movement of the folding mechanisms.
• The stand is designed to fold after initial assembly. Complete disassembly is not required for folding.

Storage

The PXN-A11 stand is designed for easy folding and storage, making it suitable for spaces where a permanent setup is not feasible. After use, loosen the necessary adjustment knobs and fold the stand. Once folded, it can be conveniently stored next to a wall, desk, or in a cabinet.

Image: The PXN-A11 stand shown in its folded configuration, stored upright in a narrow space next to a desk.

Specifications

Warranty Information

For specific warranty details regarding your PXN-A11 Racing Simulator Steering Wheel Stand, please refer to the warranty card included with your product packaging or contact PXN customer support directly. Warranty terms and conditions may vary by region and retailer.

Customer Support

If you encounter any issues or have questions regarding your PXN-A11 Racing Simulator Steering Wheel Stand, please contact PXN customer support. You can find contact information on the official PXN website or through your retailer.

Visit the official PXN Store for more information: PXN Official Store

Official Product Videos

No official product videos from the seller were available for embedding in this manual.