Introduction
Thank you for choosing the STRICH SKT-02S Piano Keyboard Stand and Bench. This manual provides essential information for the safe and correct assembly, operation, and maintenance of your new product. Please read these instructions thoroughly before use and retain them for future reference.
Safety Information
- Ensure all components are securely fastened before placing any instrument on the stand or using the bench.
- Do not exceed the maximum weight capacity of 250 lbs for the keyboard stand.
- Keep small parts out of reach of children to prevent choking hazards.
- Avoid placing the stand or bench on uneven surfaces to prevent tipping.
- Regularly inspect the stand and bench for any signs of wear, damage, or loose connections.
Package Contents
Please verify that all components are present before beginning assembly:
- Keyboard Stand Frame (main components)
- Adjustable Keyboard Clamps (4 units)
- Sponge Padding (for contact surfaces)
- Safety Straps (2 units)
- Wheels (4 units, optional installation)
- Foot Pads (4 units, optional installation)
- Piano Bench Frame (main components)
- Cushioned Seat
- Assembly Hardware (knobs, screws, etc.)
Setup: Keyboard Stand
1. Assembly and Base Configuration
The keyboard stand features a quick assembly design. Begin by unfolding the main frame components. Decide whether to install the included wheels for mobility or the foot pads for stationary use. Screw the chosen base components securely into the bottom of the stand legs.
Image: The STRICH SKT-02S keyboard stand configured with wheels, illustrating the adjustable height and width mechanisms with directional arrows.
Image: The STRICH SKT-02S keyboard stand configured with stable foot pads, illustrating the adjustable height and width mechanisms with directional arrows.
2. Height Adjustment
To adjust the stand's height, locate the adjustment knobs on the vertical supports. Loosen the knobs, then pull the support upward or push it downward to the desired height. Ensure the adjustment pin clicks into place in one of the pre-drilled holes for secure positioning. Tighten the knobs firmly to lock the height.
3. Width Adjustment
To adjust the stand's width, locate the central horizontal adjustment knob. Loosen this knob, then slide the two halves of the stand horizontally to achieve the desired width. The stand offers an adjustable width range of 21.7 to 35 inches. Once the desired width is set, tighten the knob securely.
Image: A detailed view of the STRICH SKT-02S keyboard stand, highlighting the adjustment knobs for both height and width settings.
4. Securing Your Keyboard
The stand includes four adjustable keyboard clamps, sponge padding, and two safety straps for instrument protection. Place your keyboard on the stand. Position the four adjustable clamps to hold the keyboard firmly in place. Apply the sponge padding to contact surfaces to prevent scratches. Finally, use the two safety straps to further secure your instrument to the stand, ensuring 360-degree protection.
Setup: Piano Bench
1. Bench Assembly
The piano bench features a simple three to four-step assembly process. Attach the legs to the main frame using the provided hardware. Ensure all connections are tight and stable. Place the cushioned seat on top and secure it according to the instructions.
Image: Front view of the STRICH piano bench, showcasing its cushioned seat and sturdy base.
Image: Side view of the STRICH piano bench, highlighting the adjustable height mechanism on the legs.
2. Bench Height Adjustment
To adjust the bench height, locate the adjustment knobs on the bench legs. Loosen these knobs, then slide the inner leg sections up or down to the desired height. Ensure the adjustment pins engage fully into the holes. Tighten the knobs firmly to secure the bench at the chosen height.
Image: Angled view of the STRICH piano bench, providing a comprehensive look at its design and features.
Operating Instructions
Once the keyboard stand and bench are assembled and adjusted to your preferred height and width, carefully place your keyboard on the stand. Ensure the keyboard is centered and the safety clamps and straps are properly engaged. Sit on the bench, ensuring it is stable before beginning to play. Always verify the stability of both the stand and bench before each use.
Maintenance
- Cleaning: Wipe down the metal surfaces of the stand and bench with a soft, damp cloth. For the PU leather seat, use a mild cleaner specifically designed for synthetic leather. Avoid abrasive cleaners or solvents.
- Inspection: Periodically check all bolts, screws, and adjustment knobs to ensure they remain tight. Re-tighten if necessary.
- Storage: When not in use for extended periods, the stand and bench can be disassembled for compact storage. Store in a dry environment away from extreme temperatures.
Troubleshooting
- Stand/Bench is Wobbly: Ensure all assembly hardware is fully tightened. Check that the stand and bench are placed on a flat, level surface. If using foot pads, ensure they are evenly adjusted.
- Difficulty Adjusting Height/Width: Loosen adjustment knobs completely before attempting to slide components. Ensure no debris is obstructing the sliding mechanisms or pinholes.
- Keyboard Not Secure: Verify that all four keyboard clamps are properly positioned and tightened. Ensure the safety straps are correctly fastened around the keyboard and stand.
Specifications
| Feature | Detail |
|---|---|
| Keyboard Stand Material | Precision-engineered iron metal with thickened coating |
| Keyboard Stand Tube Diameter | 1.4 inches |
| Keyboard Stand Max. Weight Capacity | 250 lbs |
| Keyboard Stand Adjustable Width | 21.7 - 35 inches |
| Keyboard Stand Adjustable Height | 23.6 - 36.6 inches (including wheels/foot pads) |
| Bench Material | Durable metal frame, cushioned seat with high-quality soft padding and PU leather |
| Compatibility | Suitable for 54, 61, and 88-key electric pianos or keyboards |
Warranty Information
STRICH products are manufactured to high-quality standards. This product comes with a limited warranty against defects in materials and workmanship under normal use. Please retain your proof of purchase for warranty claims. For specific warranty terms and conditions, please refer to the documentation included with your purchase or contact customer support.
Customer Support
If you have any questions, require assistance with assembly, or encounter any issues with your STRICH SKT-02S Piano Keyboard Stand and Bench, please contact our customer support team. Refer to your product packaging or the STRICH official website for contact details.
