Introduction
Thank you for choosing the Linsoul TANGZU Wan'er S.G II In-Ear Monitors. These high-fidelity wired earbuds are designed to deliver a refined audio experience with enhanced clarity and comfort. This manual provides essential information for setting up, operating, maintaining, and troubleshooting your new in-ear monitors.
Image: Linsoul TANGZU Wan'er S.G II In-Ear Monitors in Clear White.
Package Contents
Please verify that all items are present in your package:
- Wan'er S.G II Earphones (1 pair)
- Silver Plated OFC Cable (1 unit)
- Earphone Stand Artwork (1 unit)
- Tang Sancai Eartips (multiple sizes)
- Standard Silicone Eartips (multiple sizes)
Image: All items included in the Linsoul TANGZU Wan'er S.G II package.
Setup
1. Connecting the Cable
- Identify the left (L) and right (R) earpieces and the corresponding connectors on the cable. The cable features a 0.78mm 2Pin flat connector.
- Carefully align the pins on the cable with the sockets on the earpieces. Ensure the correct orientation to avoid bending the pins.
- Gently push the cable connectors into the earpiece sockets until they are securely seated. Do not force the connection.
Image: Detachable silver-plated OFC cable with 2-pin connectors.
2. Choosing Eartips
Proper eartip selection is crucial for sound quality and comfort. Experiment with the included Tang Sancai and standard silicone eartips of various sizes to find the best fit for your ears. A good seal ensures optimal bass response and noise isolation.
- Tang Sancai Eartips: Engineered with medical-grade silicone for comfort and a secure canal seal, designed to reduce listening fatigue.
- Standard Silicone Eartips: Provide a comfortable fit for general use.
Image: Custom Tangzu Sancai eartips in different sizes and colors.
3. Wearing the IEMs
- Insert the earpieces into your ears, ensuring a snug and comfortable fit. The ergonomic design is shaped to adapt to the ear's contour.
- Route the cable over your ears. This over-ear wearing style helps secure the IEMs and reduces microphonics (cable noise).
- Adjust the cable's ear hooks for a secure and pain-free fit, allowing for extended listening sessions without discomfort.
Image: Demonstrating the ergonomic wearing of the TANGZU Wan'er S.G II IEMs.
Operating
1. Audio Playback
Connect the 3.5mm or Type-C plug of the cable to your audio source (e.g., smartphone, digital audio player, computer). Adjust the volume on your device to a comfortable listening level before placing the IEMs in your ears.
2. Microphone Function (Type-C Mic Variant)
If you have the Type-C Mic variant, the inline microphone allows for hands-free communication. Ensure your device recognizes the microphone input. Use the inline controls (if present) for play/pause and call management.
Maintenance
1. Cleaning
- Regularly clean the eartips with a soft, damp cloth. For deeper cleaning, eartips can be removed and washed with mild soap and water, then thoroughly dried before reattaching.
- Wipe the earpieces and cable with a dry, soft cloth to remove any dust or debris. Avoid using harsh chemicals or abrasive materials.
- Ensure the nozzle filters are clear of earwax or debris. Use a small, soft brush if necessary, being careful not to push debris further in.
2. Cable Care
- Avoid sharp bends or excessive pulling on the cable, especially near the connectors.
- When detaching the cable, grasp the connector housing firmly, not the cable itself, and pull straight out.
3. Storage
When not in use, store your IEMs in a clean, dry place, preferably in a protective case, to prevent damage from dust, moisture, and physical impact.
Troubleshooting
| Problem | Possible Cause | Solution |
|---|---|---|
| No sound or intermittent sound | Loose cable connection, incorrect audio source selection, low volume on device, damaged cable/earpiece. | Ensure cable is securely connected. Check audio source settings. Increase device volume. Test with another audio source or cable if possible. |
| Poor sound quality (e.g., lack of bass, tinny sound) | Improper eartip seal, dirty nozzle filter, incorrect eartip size. | Adjust eartips for a secure seal. Try different eartip sizes. Clean nozzle filters. |
| Discomfort during wear | Incorrect eartip size, improper wearing technique. | Experiment with different eartip sizes. Adjust the earpiece position and cable routing for a more comfortable fit. |
| Microphone not working (Type-C Mic variant) | Device not recognizing microphone, mute function active, damaged cable. | Check device audio input settings. Ensure microphone is not muted. Test with another device if possible. |
Specifications
The TANGZU Wan'er S.G II In-Ear Monitors feature an upgraded design and performance:
- Driver: 10mm Dynamic Driver with upgraded driver chamber and PET diaphragm.
- Sound Profile: Balanced, detailed, with enhanced clarity and improved top-end extension.
- Ergonomics: New ergonomic shell shape for a secure and comfortable fit.
- Cable: 1.2m 5N OFC braided cable.
- Connector: 0.78mm 2Pin flat connector (detachable).
- Plug Types: Available in 3.5mm, 4.4mm, or Type-C with Mic variants.
- Sensitivity: 113.5 dB @ 1kHz.
- Impedance: 19Ω @ 1kHz (20%).
- Frequency Range: 20 Hz - 20,000 Hz.
- Noise Control: Sound Isolation.
- Item Weight: Approximately 5.6 ounces (0.16 Kilograms).
Image: Detailed comparison of the 1st and 2nd generation Wan'er S.G IEMs.
Image: Exploded view illustrating the internal structure and components of the IEM.
Warranty and Support
Linsoul products are designed for durability and performance. For specific warranty details, including coverage period and terms, please refer to the warranty card included with your product or visit the official Linsoul website. For technical support, troubleshooting assistance beyond this manual, or inquiries regarding your product, please contact Linsoul customer service through their official channels.
Linsoul Official Store: Visit Linsoul Store on Amazon
