Bewinner M5 E
Bewinner M5 E 4G/5G Portable Router User Manual
Introduction
This manual provides instructions for the Bewinner M5 E 4G/5G Portable Router. Please read this manual carefully before using the device to ensure proper operation and to maintain its performance. This portable router allows you to connect to the internet using a 4G/5G SIM card, providing high-speed mobile hotspot functionality for up to 10 devices. It supports LTE CAT4 standard with speeds up to 300Mbps and features a 2100mAh rechargeable battery for extended use.
Package Contents
The product package should contain the following items:
- 1 x Bewinner M5 E Portable Router
- 1 x Charging Cable
- 1 x Instruction Manual
Product Overview
The Bewinner M5 E Portable Router is a compact device designed for mobile internet access. It features a simple interface with indicators for signal strength, Wi-Fi status, and battery level, along with a power button and a Micro SIM card slot.

Image: Front view of the Bewinner M5 E Portable Router, showing signal, Wi-Fi, and battery indicators, along with the '4G/5G' logo and power button.

Image: Side view of the Bewinner M5 E Portable Router, highlighting the ventilation design.
Setup
1. Insert SIM Card
Locate the SIM card slot on the device. Carefully insert a Micro SIM card (not included) into the designated slot. Ensure the SIM card is activated by your service provider and its PIN code is disabled before insertion. Incorrect insertion may damage the card or the device.
2. Power On
Press and hold the power button on the front of the device until the indicators light up. The device will begin searching for a cellular network connection.
3. Initial Configuration (if needed)
In most cases, the router will automatically connect to the internet. However, if it does not connect, you may need to manually configure the Access Point Name (APN) settings. Refer to your SIM card provider for the correct APN details. To access the router's configuration interface, connect a device (e.g., smartphone, laptop) to the router's Wi-Fi network, then open a web browser and enter the router's default IP address (usually found on a sticker inside the device or in the manual).
Operating Instructions
Connecting Devices
Once the router is powered on and has established a connection to the cellular network, it will broadcast a Wi-Fi signal. On your smartphone, tablet, laptop, or other Wi-Fi enabled device, search for available Wi-Fi networks. Select the network name (SSID) corresponding to your router and enter the password (Wi-Fi Key), which is typically printed on a label inside the router or on its packaging. The router supports connecting up to 10 devices simultaneously.

Image: Illustration demonstrating the portable router's ability to connect up to 10 devices, including monitors, desktop PCs, laptops, and phones, without performance lag.
Charging the Device
The router is equipped with a 2100mAh Li-Polymer battery, providing over 10 hours of continuous use on a full charge. To recharge, connect the provided charging cable to the router's USB port and to a power source such as a computer USB port, a mobile power bank, or a car USB charger. For optimal performance and longevity, ensure the device has adequate ventilation and cooling during extended periods of use or charging.

Image: The Bewinner M5 E Portable Router shown alongside its USB charging cable.

Image: A graphic representation of a battery with glowing green rings, symbolizing high performance and extended usage time.
Product Video
Video: A demonstration of the Portable 4G 5G Router, highlighting its features and SIM card slot. This video is provided by the seller, Sxhlsellon.
Specifications
| Feature | Detail |
|---|---|
| Model | M5 E (Eurasian Version) |
| Network Bands | FDD: B1, 3, 5, 7, 8, 20; TDD: B40, 41 |
| Chipset | For 8916 |
| Battery Type | Li Polymer, 2100mAh (Built-in) |
| Network Speed | Up to 300Mbps (LTE CAT4) |
| SIM Card Type | Micro SIM (Excluded) |
| Max Connected Devices | 10 |
| Dimensions | 5.12 x 4.33 x 1.18 inches |
| Item Weight | 4.2 ounces |
Troubleshooting
No Internet Connection
- Ensure the Micro SIM card is correctly inserted and activated by your service provider.
- Verify that the SIM card's PIN code has been disabled.
- Check the APN settings. If necessary, manually configure them via the router's web interface using the details from your SIM card provider.
- Confirm that there is adequate cellular signal strength in your current location.
Cannot Connect to Wi-Fi
- Ensure the router is powered on and its Wi-Fi indicator is active.
- Verify that you are entering the correct Wi-Fi password (SSID Key).
- Restart both the router and your connecting device.
Slow Internet Speed
- Check the cellular signal strength. Move the router to an area with better reception if possible.
- Reduce the number of devices connected to the router simultaneously.
- Ensure the device has adequate cooling, especially during prolonged use, to prevent performance degradation.
Safety Information
- Do not expose the device to extreme temperatures, direct sunlight, or moisture.
- Avoid dropping the device or subjecting it to strong impacts.
- Use only the provided or approved charging accessories to prevent damage and ensure safety.
- Do not attempt to disassemble, modify, or repair the device yourself. Contact customer support for assistance.
- Keep the device out of reach of children.
Warranty and Support
For detailed warranty information, technical support, or service inquiries regarding your Bewinner M5 E Portable Router, please refer to the product packaging, the official Bewinner website, or contact the customer service department of the retailer where the product was purchased.
Ask a question about this manual
Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.