Introduction
Thank you for choosing the GOLABS TE1 Truck Bed Tent. This manual provides essential information for the safe and efficient setup, operation, and maintenance of your tent. Please read all instructions carefully before use to ensure a comfortable and secure camping experience.
The GOLABS TE1 Truck Bed Tent is designed for 2 people and fits most 5-6 ft pickup truck beds. It features a pre-assembled design for quick setup, waterproof 210D Oxford fabric with PU2000mm coating, and an extra rainfly for enhanced protection.
What's in the Box
Verify that all components are present before beginning assembly:
- Truck Bed Tent
- Rainfly
- Fiberglass Poles (Pre-attached)
- Storage Bag
- Instruction Manual (This document)
Image: All components of the GOLABS TE1 Truck Bed Tent, including the main tent body, rainfly, pre-attached fiberglass poles, and a compact storage bag.
Setup Instructions
The GOLABS TE1 Truck Bed Tent features a quick 8-minute setup with its innovative pre-attached pole design. Follow these steps for a hassle-free installation:
- Prepare the Tent: Take the tent out of its storage bag. Lay it flat on the ground or in the truck bed. Extend the four support poles outward.
- Pop-up Mechanism: Locate the pop-up mechanism button at the top center of the tent. Pull this button downward until you hear a "click" sound. This will install the main tent body.
- Insert Door Support Poles: Insert the tent door support poles into the designated curtain holes.
- Secure Door Support Poles: Ensure the tent door support pole fits into the stopper hole, with hooks securing it to the support poles.
- Position on Truck: Place the tent on the truck bed with the main door facing outward.
- Attach Hooks and Tighten Straps: Secure the tent to your truck bed using the provided hooks and straps. Ensure all straps are tightened for a secure fit.
- Install Rainfly (Optional, Recommended): For dual waterproofing and enhanced protection, place the rainfly over the tent and secure it using the buckles and vents.
Image: Step 1 & 2 of setup, showing the pop-up mechanism for quick tent body installation.
Image: A visual guide illustrating the five main steps for setting up the truck bed tent, from unfolding to securing it on the truck.
Video Guide: Easy Setup
Video: An official GOLABS video demonstrating the quick and easy setup process for the truck bed tent, highlighting the pre-assembled design.
Operating Your Tent
Once set up, your GOLABS TE1 Truck Bed Tent offers a comfortable and versatile space for your outdoor adventures.
Ventilation and Privacy
The tent features 2 side mesh windows and a rear vent to ensure excellent airflow, keeping the interior comfortable in any season. For privacy, zip up the outer layer of the windows.
Image: A user adjusting a mesh window, demonstrating the tent's ventilation and privacy features.
Interior Features
- Storage Pockets: Two interior storage pockets are available to keep small items organized and within reach.
- Hanging Hook: A hook is located at the top of the tent, perfect for hanging lights or other small accessories. It has a maximum load capacity of 15.43 lbs (7 kg).
Image: Interior storage pockets for organizing small items.
Image: The internal hook for hanging lights or other gear.
Maintenance
Proper care and maintenance will extend the life of your GOLABS TE1 Truck Bed Tent:
- Cleaning: Clean the tent with a soft brush or sponge and mild soap. Rinse thoroughly with water. Do not use harsh detergents or bleach.
- Drying: Always ensure the tent is completely dry before packing it away to prevent mold and mildew.
- Storage: Store the tent in its original storage bag in a cool, dry place, away from direct sunlight and extreme temperatures.
- Repairs: For minor tears or punctures, use a tent repair kit. For significant damage, contact GOLABS customer support.
Troubleshooting
If you encounter any issues with your GOLABS TE1 Truck Bed Tent, refer to the following common solutions:
- Tent Not Standing Firmly: Ensure all support poles are fully extended and locked into place. Check that all straps are securely attached to the truck bed and tightened.
- Water Leakage: Verify that the rainfly is correctly installed and all zippers are fully closed. Ensure the tent fabric is not damaged.
- Difficulty Packing: Ensure all air is expelled from the tent before folding. Follow the folding instructions in reverse order of setup to achieve a compact size.
For further assistance, please contact GOLABS customer support.
Specifications
| Feature | Detail |
|---|---|
| Brand | GOLABS |
| Model Name | TE1 |
| Product Dimensions | 86.61"L x 73.62"W x 56.69"H |
| Item Weight | 13.9 Pounds |
| Occupancy | 2 Person |
| Seasons | 4 Season |
| Material | Fiberglass (Poles), 210D Oxford fabric (Tent Floor), Oxford (Rainfly) |
| Water Resistance Technology | PU Coating with Rainfly (PU2000mm) |
| Special Feature | Quick Setup, Rainproof, Windproof |
| Installation Type | Attached to Vehicle Back |
| Compatible Truck Bed Size | 5ft–6ft pickup beds (e.g., F150, Ram, Silverado, Tundra, Sierra, Titan) |
Warranty and Support
The GOLABS TE1 Truck Bed Tent comes with a 1-year warranty from the date of purchase. This warranty covers manufacturing defects in materials and workmanship.
For warranty claims, technical support, or any questions regarding your product, please contact GOLABS customer service through the retailer where you purchased the tent or visit the official GOLABS website.
Please retain your proof of purchase for warranty validation.
