SONGMICS KCS060B01

SONGMICS Expandable Microwave Shelf

Model: KCS060B01

Important Safety Information

Please read and understand all instructions before assembly and use of this product. Failure to follow these instructions may result in product damage or personal injury.

  • Keep all packaging materials away from children.
  • Ensure all parts are present and undamaged before assembly. Do not use if any parts are missing or defective.
  • Assemble the product on a soft, clean surface to prevent scratches.
  • Tighten all screws firmly, but do not overtighten. Periodically check all connections for tightness.
  • Do not exceed the maximum static load capacity of 25 kg (55 lb).
  • Place the shelf on a stable, level surface.
  • Avoid placing hot items directly on the bamboo surface without protection.

Package Contents

Verify that all components listed below are included in your package:

  • 1 x Microwave Stand (Steel Frame with Bamboo and Steel Panels)
  • 1 x Accessory Kit (includes screws, Allen key, etc.)
  • 4 x Removable Hooks
  • 1 x Instruction Manual

Setup and Assembly

Assembly of the SONGMICS Expandable Microwave Shelf is designed to be straightforward and typically takes about 5 minutes. Follow these steps:

  1. Identify Components: Lay out all parts and identify them according to the diagram. You should have two side frames (A and B) and the main shelf panel (C) which consists of both steel and bamboo sections.
  2. Attach Side Frames to Shelf Panel: Align the holes on the side frames (A and B) with the corresponding holes on the main shelf panel (C). Secure them using the provided screws from the accessory kit. Ensure the bamboo section of the shelf panel is facing upwards.
  3. Tighten All Connections: Once all screws are in place, use the included Allen key to firmly tighten all connections. Do not overtighten.
  4. Attach Hooks: The four removable hooks can be attached to the side frame (B) as desired for hanging utensils or oven mitts.
Exploded view of SONGMICS microwave shelf parts A, B, C and hooks
Figure 1: Exploded view of the microwave shelf components, showing side frames (A, B) and the main shelf panel (C) with hooks.
Diagram showing adjustable width and dimensions of the microwave shelf
Figure 2: Illustration of the adjustable width feature (41.5-64 cm) and overall dimensions of the assembled shelf.

Operating Instructions

The SONGMICS Expandable Microwave Shelf is designed for versatile kitchen storage and organization.

Adjusting the Width

The shelf features an expandable design, allowing its width to be adjusted from 41.5 cm to 64 cm. To adjust, gently pull or push the two main sections of the shelf apart or together until the desired width is achieved. Ensure the shelf is empty before adjusting its width to prevent items from falling.

Placement and Use

Place the assembled shelf over your microwave oven, toaster oven, or other kitchen appliances. The top shelf provides additional space for spice bottles, cookware, or other kitchen essentials. The removable hooks can be used to hang spoons, spatulas, oven mitts, or dish towels.

SONGMICS microwave shelf in a kitchen setting with a microwave and various items
Figure 3: The microwave shelf in use, demonstrating its function as an organizer for kitchen appliances and accessories.

Weight Capacity

The robust steel frame, reinforced with corner braces and a crossmember, allows the shelf to support a maximum static load of 25 kg (55 lb) even when fully extended. Distribute weight evenly across the shelf to maintain stability.

Image showing the microwave shelf supporting a 25 kg weight
Figure 4: Visual representation of the shelf's strong support, capable of holding up to 25 kg.

Versatile Applications

Beyond the kitchen, this shelf can be utilized in various settings such as studies, offices, or living rooms for organizing books, office supplies, or decorative items.

Collage of the microwave shelf used in different settings: kitchen, office, and garage
Figure 5: Examples of the shelf's versatility, showcasing its use in a kitchen, office, and workshop environment.

Maintenance and Care

Proper care will ensure the longevity and appearance of your SONGMICS microwave shelf.

  • Cleaning: Wipe the steel frame with a soft, damp cloth. For the bamboo surface, use a slightly damp cloth and dry immediately. Avoid abrasive cleaners or harsh chemicals that may damage the finish.
  • Spills: Clean up spills immediately, especially on the bamboo surface, to prevent staining or water damage.
  • Inspection: Periodically check all screws and connections to ensure they remain tight. Retighten if necessary.
  • Environment: Avoid prolonged exposure to direct sunlight or extreme humidity, which can affect the bamboo material.

Troubleshooting

If you encounter any issues with your microwave shelf, refer to the following common solutions:

  • Shelf is unstable/wobbly:
    • Ensure all screws are fully tightened.
    • Verify the shelf is placed on a flat, level surface.
    • Check that the expandable sections are properly aligned and secured.
  • Difficulty adjusting width:
    • Ensure the shelf is empty before attempting to adjust the width.
    • Check for any obstructions or debris in the sliding mechanism.
  • Shelf appears damaged upon arrival:
    • Do not proceed with assembly. Contact customer support immediately with details and images of the damage.

Specifications

ModelKCS060B01
ColourInk Black, Light Bamboo
MaterialSteel, Bamboo
Product Dimensions (D x W x H)31.5 x (41.5-64) x 42 cm (12.4"D x (16.3"-25.2")W x 16.5"H)
Product Weight4.1 kg (8.8 lb)
Max. Static Load Capacity25 kg (55 lb)
Assembly RequiredYes
Included ComponentsMicrowave Stand, Accessory Kit, 4 Removable Hooks

Warranty and Support

For information regarding warranty coverage or if you require assistance with your SONGMICS Expandable Microwave Shelf, please refer to the purchase documentation or contact the retailer/manufacturer directly. Ensure you have your model number (KCS060B01) and proof of purchase available when contacting support.

Related Documents - KCS060B01

Preview SONGMICS BCB001 Tension Rod Corner Shelf Installation Guide
This guide provides step-by-step instructions for assembling and installing the SONGMICS BCB001 tension rod corner shelf. Learn how to measure, assemble parts, adjust length, and secure the shelf for stable storage.
Preview SONGMICS BCB001 Adjustable Corner Tension Shelf - Assembly Guide
Detailed assembly instructions and parts list for the SONGMICS BCB001 adjustable corner tension shelf unit. Learn how to install your SONGMICS shelf securely.
Preview SONGMICS HSR04 Hallway Coat Rack Assembly Instructions
Detailed assembly guide for the SONGMICS HSR04 hallway coat rack, including a parts list, step-by-step instructions, and safety precautions. Ensure correct assembly for stability and safety.
Preview SONGMICS GLR030B01/030B11 Shelving Unit Assembly Instructions
Comprehensive assembly instructions and safety guidelines for the SONGMICS GLR030B01/030B11 shelving unit. Learn how to safely build and use your storage shelf.
Preview SONGMICS LMR028 8-Tier Shoe Rack Assembly Instructions
This document provides assembly instructions for the SONGMICS LMR028 8-Tier shoe rack. It includes a detailed parts list and step-by-step guidance for constructing the shoe organizer, designed for storing shoes with a maximum static load capacity of 8 kg per shelf. Safety warnings regarding small parts and assembly procedures are also included.
Preview SONGMICS ULCB10/63/64 Bamboo Laundry Hamper - Assembly Instructions and Guide
Detailed assembly instructions and user guide for the SONGMICS ULCB10/63/64 bamboo laundry hamper. Learn how to assemble and care for your laundry basket.