1. Introduction
Thank you for choosing the Okin Small Electric Standing Desk. This manual provides essential information for the safe and efficient assembly, operation, and maintenance of your new height-adjustable workstation. This desk is designed to offer ergonomic flexibility, allowing you to easily switch between sitting and standing positions to promote a healthier work environment.
Figure 1: Okin Small Electric Standing Desk (White, 36x24 inch)
2. Safety Information
Please read all safety instructions before assembly and use. Failure to follow these instructions may result in injury or damage to the product.
- Ensure all components are present and undamaged before assembly.
- Keep children and pets away from the desk during operation to prevent accidents.
- Do not overload the desk. The maximum weight capacity is 176 lbs (80 kg).
- Avoid placing liquids directly on the desk surface without proper coasters to prevent spills near electrical components.
- Do not attempt to disassemble or repair the motor or control box yourself. Contact qualified service personnel.
- Ensure the power cord is not pinched or damaged.
- Operate the desk on a level surface to maintain stability.
3. Package Contents
Verify that all parts are included in your package. If any parts are missing or damaged, please contact customer support.
Figure 2: All components included for assembly
- Desktop (1 piece)
- Lifting Columns (2)
- Feet (2)
- Control Box (1)
- Hand Controller (1)
- Power Adapter (1)
- Headphone Hook (1)
- Assembly Hardware (screws, Allen wrench)
- Adjustable Foot Pads (4)
4. Assembly Instructions
Follow these steps to assemble your Okin Electric Standing Desk. It is recommended to assemble the desk on a soft, clean surface to prevent scratches.
- Attach Feet to Lifting Columns: Securely fasten the two feet to the bottom of each lifting column using the provided screws and Allen wrench.
- Connect Lifting Columns to Desktop: Place the desktop upside down on your protected surface. Align the lifting columns with the pre-drilled holes on the underside of the desktop. Attach them using the appropriate screws.
- Install Control Box: Mount the control box to the designated area on the underside of the desktop using the provided screws.
- Connect Cables: Plug the cables from the lifting columns into the control box. Connect the hand controller cable to the control box. Finally, connect the power adapter to the control box.
- Attach Headphone Hook: Install the headphone hook to the desired location on the side of the desktop using the provided screw.
- Position Desk: Carefully flip the desk upright and place it in its desired location. Adjust the foot pads to ensure the desk is level and stable.
5. Operating Instructions
Your Okin Electric Standing Desk features a simple controller for height adjustment.
5.1 Height Adjustment
Figure 3: Simple Controller for Height Adjustment
- Raise Desk: Press and hold the UP button on the hand controller. The desk will move upwards smoothly. Release the button at your desired height.
- Lower Desk: Press and hold the DOWN button on the hand controller. The desk will move downwards smoothly. Release the button at your desired height.
The desk adjusts smoothly from 27.56 inches to 45.28 inches, allowing for a comfortable ergonomic position whether sitting or standing.
Figure 4: Ergonomic Height Adjustment for Sitting and Standing
5.2 Cable Management
The desk features grooves at the back of the tabletop for easy cable arrangement, helping to maintain a clutter-free workspace.
Figure 5: Integrated Cable Management and Monitor Stand Mount Area
6. Maintenance
To ensure the longevity and optimal performance of your Okin Electric Standing Desk, follow these simple maintenance guidelines:
- Cleaning: Wipe the desk surface and frame with a dry cloth. Avoid using abrasive cleaners or harsh chemicals that could damage the finish.
- Regular Checks: Periodically check all screws and connections to ensure they are tight. Retighten if necessary.
- Cable Inspection: Inspect the power cord and other cables for any signs of wear or damage. Replace damaged cables immediately.
- Weight Limit: Do not exceed the maximum weight recommendation of 176 pounds.
7. Troubleshooting
If you encounter any issues with your desk, refer to the table below for common problems and solutions.
| Problem | Possible Cause | Solution |
|---|---|---|
| Desk does not move | Power cord disconnected; Control box cable loose; Overload protection activated. | Check power connections. Ensure all cables are securely plugged into the control box. Reduce weight on the desk. Unplug for 10 minutes and try again. |
| Desk moves unevenly | Uneven weight distribution; Obstruction. | Distribute weight evenly on the desktop. Check for any obstructions under or around the desk. |
| Error Code E-3 displayed | Controller malfunction or connection issue. | Check the connection of the hand controller to the control box. Unplug the desk from power for at least 10 minutes, then plug it back in to reset the system. If the issue persists, contact customer support. |
| Unusual noise during operation | Loose components; Obstruction. | Check all screws and ensure they are tightened. Remove any items that might be rubbing against the lifting columns. |
8. Specifications
Detailed specifications for the Okin Small Electric Standing Desk.
| Feature | Detail |
|---|---|
| Brand | Okin |
| Model Number | OKSM6545W3624WO |
| Product Dimensions (D x W x H) | 42.9"D x 6.3"W x 26.2"H (Packaging/Frame) |
| Desktop Size | 36" x 24" (One-piece) |
| Color | White |
| Minimum Height | 27.56 inches |
| Maximum Height | 45.28 inches |
| Maximum Weight Recommendation | 176 Pounds (80 kg) |
| Item Weight | 42.9 Pounds (19.46 kg) |
| Base Material | Alloy Steel |
| Top Material Type | Wood |
| Lifting Mechanism | Electric |
| Noise Level | <50 dB |
| Special Features | Adjustable Height, Compact, Electric, Ergonomic, Headphone Hook, Cable Management Grooves |
Figure 6: Desk Dimensions and Maximum Load Capacity (176 lbs)
9. Warranty and Support
The Okin Small Electric Standing Desk comes with a Limited Warranty. For specific details regarding the warranty period and coverage, please refer to the warranty card included in your product packaging or contact Okin customer support.
For technical assistance, missing parts, or warranty claims, please contact the seller or Okin customer service directly. Provide your model number (OKSM6545W3624WO) and purchase date for faster service.
