1. Introduction and Overview
Thank you for choosing the GOOLOO GP3000 Jump Starter and AP150 PRO Tire Inflator. This comprehensive device combines powerful vehicle jump-starting capabilities with a versatile tire inflation system and additional emergency functions. Designed for reliability and ease of use, it ensures you are prepared for various roadside emergencies.
The GP3000 Jump Starter delivers 3000 Amps of peak cranking power, capable of starting most 12-volt vehicles with up to 9-liter gasoline or 7-liter diesel engines. It features advanced safety protections for secure operation. The AP150 PRO Tire Inflator offers precise and rapid inflation with multiple modes and a dynamic LED display for real-time monitoring. Together, these tools provide essential support for your automotive needs.
2. Safety Information
Please read and understand all safety instructions before using this product. Failure to follow these instructions may result in electric shock, fire, and/or serious injury.
- Always wear eye protection when operating the jump starter.
- Do not operate the unit if it is damaged.
- Keep the unit away from moisture and flammable materials.
- Ensure proper polarity connection (red clamp to positive, black clamp to negative) to avoid damage to the vehicle or unit. The GP3000 includes 10 security protections to prevent common errors.
- Do not jump start a frozen battery.
- Keep out of reach of children.
- Operate within the specified temperature range of -4°F to 140°F.
3. Package Contents
- GOOLOO GP3000 Jump Starter & AP150 PRO Tire Inflator Unit
- Smart Jumper Cables with Heavy-Duty Clamps
- Air Hose for Tire Inflator
- Various Nozzle Adapters (for balls, bicycles, etc.)
- USB-C Charging Cable
- Storage Bag
- User Manual
4. Product Components
Figure 1: The GOOLOO GP3000 Jump Starter (right) and AP150 PRO Tire Inflator (left).
GP3000 Jump Starter Features:
- Power Button: Activates the unit and LED light.
- USB-A Output: For charging external devices.
- USB-C Input/Output: For charging the unit or external devices.
- Jumper Cable Port: Connects smart jumper cables.
- LED Flashlight: Provides illumination with multiple modes.
- Battery Level Indicator: Shows remaining charge.
AP150 PRO Tire Inflator Features:
- Dynamic Progress LED Display: Shows real-time pressure and inflation status.
- Mode Button: Cycles through 5 inflation modes (Car, Motorcycle, Bicycle, Ball, Custom).
- Unit Button: Switches between PSI, KPA, and BAR pressure units.
- +/- Buttons: Adjusts target pressure.
- Start/Stop Button: Initiates or pauses inflation.
- Air Hose Port: Connects the air hose.
5. Setup and Charging the Unit
Before first use, fully charge the GOOLOO unit. Use the provided USB-C charging cable and a compatible USB wall adapter (not included) to charge the unit. The battery level indicator on the unit will show charging progress.
It is recommended to fully charge the unit every 3-6 months to maintain optimal battery health, even if not in use.
Figure 2: The GOOLOO unit can also function as a portable power bank to charge various electronic devices via its USB ports.
6. Operating Instructions: Jump Starter Function (GP3000)
The GP3000 is designed for safe and easy jump-starting of 12-volt vehicle batteries.
- Connect Jumper Cables: Insert the blue end of the smart jumper cables into the GP3000's jumper cable port.
- Attach to Battery: Connect the red (positive) clamp to the positive (+) terminal of the vehicle battery and the black (negative) clamp to the negative (-) terminal. The smart cables have built-in protections against incorrect connections.
- Power On: Press the power button on the GP3000 unit. The unit's display will indicate its status.
- Start Vehicle: Once the unit indicates it's ready (e.g., a green light on the smart cable), start your vehicle's engine.
- Remove Cables: After the vehicle starts, disconnect the clamps from the battery terminals first, then unplug the jumper cables from the GP3000 unit.
Using the BOOST Function:
If the vehicle battery is completely dead or the voltage is too low for the GP3000 to detect, the unit may not automatically enter
