Introduction
Thank you for choosing the Okin Small Electric Standing Desk. This 36" x 24" height-adjustable desk is designed to enhance your workspace with ergonomic flexibility, allowing you to seamlessly switch between sitting and standing positions. Featuring a robust motor, a one-piece desktop, and optional casters for mobility, this desk is ideal for home offices and compact spaces. Please read this manual thoroughly before assembly and operation to ensure safe and efficient use.
Figure 1: Okin Small Electric Standing Desk (Oak+casters 36 Inch)
Safety Information
- Ensure all components are securely fastened before use.
- Do not exceed the maximum weight capacity of 154 lbs (70 kg). While tested to 176 lbs, adhering to the stated capacity ensures optimal performance and longevity.
- Keep children and pets away from the desk during height adjustment.
- Avoid placing liquids directly on the control panel or motor components.
- Disconnect power before cleaning or performing any maintenance.
- Use only the provided power adapter and components.
Package Contents
Verify that all parts are present before beginning assembly. If any parts are missing or damaged, please contact customer support.
Figure 2: Included Components for Assembly
- Desktop (36" x 24" one-piece, Oak finish)
- Desk Legs (2)
- Crossbar/Frame components
- Electric Motor and Control Box
- Control Panel
- Power Adapter and Cable
- Adjustable Foot Pads (4)
- Lockable Casters (4)
- Headphone Hook
- Assembly Hardware (screws, bolts, Allen wrench)
- Instruction Manual
Assembly Instructions
Assembly is straightforward with pre-drilled holes and included accessories. It is recommended to have two people for easier assembly due to the weight of some components.
- Unpack Components: Carefully remove all parts from the packaging and lay them out on a clean, soft surface to prevent scratches. Refer to Figure 2 for a visual guide of all components.
- Attach Desk Legs to Crossbar: Secure the desk legs to the central crossbar using the provided screws and tools. Ensure all connections are firm.
- Install Motor and Control Box: Mount the electric motor and control box to the designated areas on the frame, following the pre-drilled holes. Connect the motor cable to the control box.
- Attach Desktop: Carefully place the desktop upside down on a soft surface. Align the assembled frame with the pre-drilled holes on the underside of the desktop. Secure the desktop to the frame using the appropriate screws.
- Install Control Panel: Attach the control panel to the underside of the desktop in a convenient location. Connect its cable to the control box.
- Choose Base Option:
- Adjustable Foot Pads: Screw the adjustable foot pads into the bottom of the desk legs for stationary use and leveling.
Figure 3: Adjustable Foot Pads
- Lockable Casters: Alternatively, screw the lockable casters into the bottom of the desk legs for mobility. Ensure the casters are locked when the desk is in use to maintain stability.
Figure 4: Lockable Casters
- Adjustable Foot Pads: Screw the adjustable foot pads into the bottom of the desk legs for stationary use and leveling.
- Install Headphone Hook: Attach the headphone hook to the side of the desktop as desired.
- Cable Management: Utilize the specially designed grooves at the back of the tabletop for easy cable arrangement, keeping your workspace tidy.
Figure 5: Cable Management Features
- Connect Power: Plug the power adapter into the control box and then into a wall outlet.
Operating Instructions
Height Adjustment
The Okin Electric Standing Desk allows for smooth height adjustment with a single button press. The desk adjusts from 27.56" to 45.28" (or 29.53" to 47.25" with casters) with low noise operation (below 50 dB).
Figure 6: Ergonomic Height Adjustment in Use
- Raise Desk: Press and hold the "Up" button on the control panel until the desired height is reached.
- Lower Desk: Press and hold the "Down" button on the control panel until the desired height is reached.
- Memory Presets (if available): Some models may feature memory buttons (e.g., M1, M2) to save preferred sitting and standing heights. Consult your control panel for specific instructions on setting and recalling these presets.
Using Casters
If you have installed the lockable casters, you can easily move the desk. Unlock the casters to roll the desk to a new location. Always lock the casters once the desk is in its desired position to ensure stability during use.
Figure 7: Desk with Casters for Mobility
Maintenance
- Cleaning: Wipe the desktop and frame with a dry or slightly damp cloth. Avoid abrasive cleaners or harsh chemicals that could damage the finish.
- Cable Management: Periodically check cables to ensure they are neatly arranged and not pinched or tangled, which could affect desk operation or pose a safety hazard.
- Fasteners: Occasionally check all screws and bolts to ensure they remain tight. Retighten if necessary.
Troubleshooting
If you encounter issues with your Okin Electric Standing Desk, refer to the following common problems and solutions:
| Problem | Possible Cause | Solution |
|---|---|---|
| Desk does not move. | Power cable disconnected, power outage, motor issue. | Check if the power cable is securely plugged into the desk and the wall outlet. Verify the wall outlet has power. If the issue persists, contact customer support. |
| Desk moves unevenly or makes unusual noises. | Loose fasteners, obstruction, uneven weight distribution. | Check and tighten all assembly screws. Ensure there are no obstructions under or around the desk. Distribute weight evenly on the desktop. |
| Error Code E-3 displayed on control panel. | Motor overload or sensor issue. | Unplug the desk from the power outlet for 10-15 minutes, then plug it back in. Reduce the load on the desk. If the error persists, contact customer support. |
| Desk reaches maximum/minimum height but doesn't respond. | Calibration required. | Refer to your control panel's specific instructions for recalibration. Typically, this involves holding the "Down" button until the desk reaches its lowest point and then holding it again for a few seconds until a reset is indicated. |
Specifications
Figure 8: Desk Dimensions
| Feature | Detail |
|---|---|
| Model Number | OKSM6545W3624OO-CA |
| Desktop Dimensions | 36" (Width) x 24" (Depth) |
| Height Adjustment Range (without casters) | 27.56" to 45.28" |
| Height Adjustment Range (with casters) | 29.53" to 47.25" (approximate, based on 1.97" wheel diameter) |
| Maximum Weight Capacity | 154 lbs (70 kg) |
| Motor Noise Level | < 50 dB |
| Desktop Material | Wood (Oak finish) |
| Base Material | Alloy Steel |
| Special Features | Adjustable Height, Electric, Ergonomic, Wheels (optional), Headphone Hook, Cable Management Grooves |
| Power Input | 100V-240V |
Figure 9: Powerful and Quiet Motor
Warranty and Support
The Okin Small Electric Standing Desk comes with a Limited Warranty. For specific warranty terms and conditions, please refer to the warranty card included in your package or visit the official Okin website.
For technical support, troubleshooting assistance, or to inquire about replacement parts, please contact Okin customer service:
- Website: Okin Official Store on Amazon
- Email: support@okin.com (Example, actual email not provided)
- Phone: 1-800-XXX-XXXX (Example, actual phone not provided)
Please have your model number (OKSM6545W3624OO-CA) and purchase date ready when contacting support.
