Introduction
This manual provides essential instructions for the assembly, operation, and maintenance of your Vente-unique YEVINA TV Stand with an integrated LED fireplace effect. Please read this manual thoroughly before assembly and use to ensure safe and correct operation. Keep this manual for future reference.
Safety Information
- Electrical Safety: Ensure the power outlet used for the LED fireplace is easily accessible and properly grounded. Do not overload the circuit. Disconnect power before cleaning or maintenance.
- Assembly: Assemble the unit on a soft, clean surface to prevent scratches. Ensure all components are securely fastened before use. Do not overtighten screws.
- Placement: Place the TV stand on a flat, stable surface. Avoid placing it near heat sources or in direct sunlight. Ensure adequate ventilation around the unit.
- Weight Capacity: Do not exceed the maximum weight capacity for the top surface (75 kg) or internal shelves (20 kg).
- Children and Pets: Keep children and pets away from the unit during assembly. Do not allow them to play with the unit or its electrical components.
- Fireplace Effect: The LED fireplace effect does not produce heat and poses no burn risk. However, do not obstruct the LED light source.
Package Contents
Verify that all components are present before beginning assembly. If any parts are missing or damaged, contact customer support.
- MDF panels for TV stand structure
- Tempered glass panel for fireplace insert
- LED fireplace unit with remote control
- Hardware kit (screws, dowels, hinges, etc.)
- Assembly instructions (this document)
Setup and Assembly
Assembly is required for this TV stand. It is recommended that two adults assemble the unit. Please follow the numbered steps provided in the separate assembly diagram (not included in this digital manual, refer to physical packaging) for detailed instructions.
- Unpack Components: Carefully remove all parts from the packaging and lay them out on a clean, soft surface to prevent damage.
- Identify Parts: Refer to the parts list in your physical assembly guide to identify each component.
- Assemble Frame: Begin by assembling the main frame of the TV stand using the provided screws and dowels.
- Install Doors: Attach the two hinged doors to the side compartments. Ensure hinges are aligned for smooth operation.
- Insert Fireplace Unit: Carefully slide the LED fireplace unit into the central opening. Ensure it is seated correctly and securely.
- Connect Power: Once fully assembled, plug the LED fireplace unit into a suitable electrical outlet.
Image: The Vente-unique YEVINA TV stand, fully assembled, showcasing its natural wood finish and integrated LED fireplace.
Image: The YEVINA TV stand positioned in a modern living room, with a television mounted on the wall above it.
Image: A close-up view of one of the TV stand's doors opened, revealing the internal storage compartment.
Operating the LED Fireplace Effect
The YEVINA TV stand features an integrated LED fireplace effect controlled by a remote control.
Remote Control Functions:
- Power Button: Turns the LED fireplace effect ON or OFF.
- Flame Color Button: Cycles through available flame colors (Blue, Red, Yellow/Orange).
- Timer Button: Sets an automatic shut-off timer (1 to 9 hours).
Using the Fireplace:
- Ensure the TV stand is fully assembled and the fireplace unit is plugged into a power outlet.
- Point the remote control at the fireplace unit.
- Press the Power button to activate the flame effect.
- Press the Flame Color button repeatedly to select your desired flame color.
- To set a timer, press the Timer button and select the desired duration. The unit will automatically turn off after the set time.
Image: The LED fireplace effect displaying warm orange flames.
Image: The LED fireplace effect displaying vibrant red flames.
Image: The LED fireplace effect displaying cool blue flames.
Maintenance
- Cleaning the Stand: Wipe the surfaces of the TV stand with a soft, damp cloth. Avoid abrasive cleaners or harsh chemicals that may damage the finish.
- Cleaning the Fireplace Glass: Use a glass cleaner and a soft cloth to clean the tempered glass panel of the fireplace. Do not spray cleaner directly onto the unit; apply to the cloth first.
- Dusting: Regularly dust the unit to prevent accumulation, especially around the LED fireplace unit.
- Inspecting Connections: Periodically check all screws and connections to ensure they remain tight. Retighten if necessary.
Image: A detailed close-up of the natural wood grain and textured door panel of the TV stand, highlighting its finish.
Troubleshooting
| Problem | Possible Cause | Solution |
|---|---|---|
| LED fireplace does not turn on. | Not plugged in, power outlet issue, remote control battery dead. | Ensure the unit is securely plugged in. Check the power outlet with another device. Replace remote control batteries. |
| Remote control not working. | Batteries are dead or incorrectly inserted, remote not pointed at unit. | Replace batteries, ensure correct polarity. Point remote directly at the fireplace unit. |
| Doors are misaligned or difficult to open/close. | Hinges are loose or incorrectly adjusted. | Adjust or tighten the hinge screws. Refer to the assembly diagram for hinge adjustment instructions. |
| Unit is wobbly. | Screws are loose, uneven floor. | Check and tighten all assembly screws. Move the unit to a level surface or use shims if necessary. |
Specifications
- Brand: Vente-unique
- Model Name: YEVINA
- Material: MDF, Tempered Glass, Wood
- Finish: Melamine
- Color: Natural Light Wood, Black
- LED Colors: Blue, Red, Yellow/Orange
- Control Type: Remote Control
- Connection Type: Electrical Outlet
- Doors: 2 hinged doors
- Maximum Supported Load (Top): 75 kg
- Maximum Supported Load (Internal Niches): 20 kg
- Product Dimensions (L x D x H): 163 cm x 40 cm x 48 cm
- Item Weight: 49.3 kg
Warranty Information
Vente-unique products are covered by a manufacturer's warranty against defects in materials and workmanship. The specific duration and terms of your warranty may vary. Please refer to the warranty card included with your product packaging or visit the official Vente-unique website for detailed warranty information and registration.
Keep your proof of purchase for any warranty claims.
Customer Support
If you have any questions, require assistance with assembly, or need to report a missing/damaged part, please contact Vente-unique customer support:
- Website: www.vente-unique.it
- Online Contact Form: Available on the website.
- Please have your model name (YEVINA) and purchase details ready when contacting support.
