BORNOON Tall 5-Drawer Dresser (Wood) Instruction Manual

1. Introduction

Thank you for choosing the BORNOON Tall 5-Drawer Dresser. This manual provides essential information for the safe assembly, proper use, and maintenance of your new furniture. Please read all instructions carefully before beginning assembly and retain this manual for future reference.

Figure 1.1: The assembled BORNOON Tall 5-Drawer Dresser in a modern living space. This image showcases the dresser's overall appearance and design.

2. Safety Information

WARNING: Furniture Tip-Over Hazard

Serious or fatal crushing injuries can occur from furniture tip-overs. To help prevent tip-over:

• Always install the anti-tip kit provided with the dresser.
• Never allow children to climb or hang on drawers, doors, or shelves.
• Place heaviest items in the lowest drawers.
• Do not open more than one drawer at a time.

Failure to follow these warnings can result in death or serious injury.

Figure 2.1: Illustration of the anti-tip design, showing how the dresser should be secured to the wall to prevent accidental tipping. This is crucial for child safety.

3. Package Contents

Before assembly, verify that all parts and hardware are present and undamaged. If any parts are missing or damaged, please contact customer support for free replacement.

3.1. Parts List

• Top Panel
• Side Panels (Left & Right)
• Back Panel
• Drawer Fronts (5x)
• Drawer Sides & Backs (10x each)
• Drawer Bottoms (5x)
• Base Support

3.2. Hardware List

• Screws, Dowels, Cam Locks, Cam Bolts
• Drawer Slides (10x)
• Metal Handles (5x)
• Anti-Tip Kit (Strap, Screws, Wall Anchors)
• Assembly Tools (e.g., Hex Key)

Figure 3.1: Examples of individual components and hardware included in the package. Always check against the provided parts list.

4. Setup and Assembly

Assembly typically requires two people and approximately 2-3 hours. Follow the detailed instructions and diagrams provided in your separate assembly guide. Ensure all parts are correctly oriented before tightening fasteners.

4.1. Pre-Assembly Steps

1. Clear a spacious area for assembly.
2. Lay out all parts and hardware, organizing them by type.
3. Identify each part using the labels and diagrams.

4.2. Assembly Overview

The assembly process generally involves:

1. Assembling the main frame of the dresser.
2. Attaching drawer slides to the frame and drawer sides.
3. Constructing each of the five drawers.
4. Inserting the assembled drawers into the frame.
5. Installing the anti-tip kit to secure the dresser to a wall.

Figure 4.1: Detailed dimensions of the dresser and its drawers. Overall dimensions are 15.75" D x 27.6" W x 45.47" H. Each drawer measures 14.3" D x 22.59" W x 7.66" H.

Figure 4.2: Details of the upgraded drawer slide system and the solid supporting base, highlighting key structural elements for smooth operation and stability.

5. Operating Instructions

Your BORNOON 5-Drawer Dresser is designed for versatile storage in various rooms.

5.1. Drawer Usage

• Each of the five drawers provides ample space for clothing, accessories, linens, or other household items.
• The reinforced bottom track system ensures smooth and quiet drawer operation.
• To open, gently pull the metal handle. To close, push the drawer firmly until it is fully seated.

5.2. Versatile Placement

This dresser can be used in:

• Bedroom: For clothing and personal items.
• Living Room: As an accent piece or for general storage.
• Hallway/Entryway: For organizing smaller items or as a decorative surface.
• TV Stand: The wide top surface can accommodate TVs up to 55 inches.

Figure 5.1: The dresser with its five drawers open, demonstrating the ample storage capacity for various items such as clothing, snacks, and books.

6. Maintenance

To ensure the longevity and appearance of your dresser, follow these maintenance guidelines:

• Cleaning: Wipe surfaces with a soft, damp cloth. Avoid harsh chemicals or abrasive cleaners, which can damage the finish.
• Spills: Clean spills immediately to prevent staining or damage to the engineered wood.
• Sunlight: Avoid prolonged exposure to direct sunlight, which can cause fading or discoloration.
• Humidity: Maintain a stable room temperature and humidity level to prevent warping or cracking.
• Hardware: Periodically check and tighten all screws and fasteners to ensure stability.

7. Troubleshooting

If you encounter any issues with your dresser, refer to the following common problems and solutions:

7.1. Drawers Do Not Close Flush

• Check Drawer Slides: Ensure the drawer slides are correctly installed and aligned on both the drawer and the dresser frame. Misalignment can prevent smooth closing.
• Verify Assembly: Double-check that all cam locks and bolts are fully tightened and that the drawer box itself is assembled squarely.
• Obstructions: Look for any objects or debris obstructing the drawer's path or the slide mechanism.

7.2. Dresser Wobbles

• Level Surface: Ensure the dresser is placed on a flat, level surface.
• Tighten Fasteners: Re-tighten all assembly screws and bolts throughout the dresser frame.
• Anti-Tip Kit: Confirm the anti-tip kit is securely installed, as this also contributes to overall stability.

7.3. Missing or Damaged Parts

• If you discover any missing or damaged parts upon unboxing or during assembly, do not proceed with assembly.
• Contact BORNOON customer support immediately for free replacement parts.

8. Specifications

9. Warranty and Support

9.1. Free Part Replacement

BORNOON offers free replacement for any parts that are damaged or missing due to shipping or assembly issues. Please contact our customer support team with details of the issue and your purchase information.

9.2. Customer Support

For any questions, concerns, or assistance with your BORNOON dresser, please visit the BORNOON Store on Amazon or refer to your purchase documentation for direct contact information.