Introduction
This manual provides detailed instructions for the assembly, operation, maintenance, and troubleshooting of your OUTON LED Dimmable Tree Floor Lamp. Please read this manual thoroughly before use and retain it for future reference.
Important Safety Instructions
- Ensure the lamp is unplugged before assembly, cleaning, or replacing parts.
- Do not use the lamp in wet locations or near water.
- Keep the lamp away from heat sources.
- Use only the specified LED bulbs provided with the lamp.
- Do not attempt to modify the lamp or its components.
- Ensure the base is stable on a flat surface to prevent tipping.
- Keep the remote control away from children.
What's in the Box
Verify that all components are present before beginning assembly:
- Lamp Base
- Lamp Pole Sections (multiple)
- Lamp Head Assembly with 3 Rotatable Lights
- 3 x LED Bulbs (pre-installed or separate)
- Power Adapter
- Remote Control
- Instruction Manual
Image: All components included in the OUTON Tree Floor Lamp package.
Setup and Assembly
Assembly is straightforward and requires no additional tools.
- Carefully unpack all components from the box.
- Connect the lamp pole sections by gently twisting them clockwise until secure. Ensure the wires pass freely through the sections.
- Attach the lamp head assembly to the top pole section.
- Secure the assembled pole to the lamp base by twisting it clockwise until firm.
- Insert the LED bulbs into the lamp heads if not pre-installed.
- Connect the power adapter to the lamp and then plug it into a standard electrical outlet.
Video: This video demonstrates the assembly process of the OUTON LED Tree Floor Lamp, showing how to connect the pole sections and attach the base and lamp heads.
Video: This video illustrates the assembly and initial setup of the dimmable LED floor lamp, including connecting components and powering on.
Operating Instructions
Power On/Off and Brightness Adjustment
The lamp can be controlled via the touch-slide panel on the lamp pole or the included magnetic remote control.
- Touch-Slide Control: Gently slide your finger along the touch panel on the lamp pole to adjust brightness from 1% to 100%. Tap the power button to turn the lamp on or off.
- Remote Control: Use the power button on the remote to turn the lamp on or off. Use the brightness adjustment buttons (+/-) to increase or decrease light intensity.
Image: Demonstration of touch-slide dimming and power control on the lamp pole.
Color Temperature Selection
The lamp offers 4 color temperature settings, ranging from warm to cool light.
- Touch-Slide Control: Tap the color temperature button on the lamp pole to cycle through the available color temperatures.
- Remote Control: Use the 'K' button on the remote to switch between 3000K (Warm), 4000K (Warm White), 5000K (Day Light), and 6500K (Cool White).
Image: Visual representation of the four adjustable color temperatures.
Rotatable Lamp Heads
Each of the three lamp heads can be adjusted to direct light precisely where needed.
- The lamp heads rotate 350° horizontally and tilt 180° vertically.
- Gently adjust each lamp head by hand to achieve the desired lighting angle.
Image: Illustration of the flexible rotation and tilt of the lamp heads.
Scene Modes and Timer Function
The remote control provides access to preset scene modes and a convenient timer function.
- Scene Modes: Use the dedicated buttons on the remote for preset modes such as Reading, Working, Night Light, or Breastfeeding.
- 1-Hour Timer: Press the "1H" button on the remote to activate a 1-hour auto-off timer. The lamp will turn off automatically after one hour.
- Memory Function: The lamp remembers your last brightness and color temperature settings when turned off and restores them upon powering on.
Image: Examples of different lighting modes for various activities.
Image: The 1-hour timer function in use for bedtime reading.
Image: The memory function retaining the last lighting settings.
Maintenance
- Cleaning: Disconnect the power before cleaning. Wipe the lamp with a soft, dry cloth. Do not use abrasive cleaners or solvents.
- Bulb Replacement: The lamp uses specific 24V 9W LED bulbs. If replacement is necessary, contact customer service for compatible bulbs. Do not use standard 120V bulbs.
- General Care: Regularly check the power cord for any damage. Ensure all connections remain secure.
Troubleshooting
| Problem | Possible Cause | Solution |
|---|---|---|
| Lamp does not turn on. |
|
|
| Remote control not working. |
|
|
| Light flickers or is dim. |
|
|
Specifications
| Feature | Detail |
|---|---|
| Brand | OUTON |
| Model Number | B0F18W1236 |
| Product Dimensions | 10"D x 10"W x 67"H |
| Item Weight | 5.04 Kilograms |
| Light Source Type | LED |
| Number of Light Sources | 3 |
| Wattage | 36 watts |
| Color Temperatures | 3000K-6500K (4 settings) |
| Brightness Adjustment | 1% to 100% Dimmable |
| Switch Type | Push Button, Remote, Touch Slide |
| Additional Features | Adjustable Arm, Adjustable Color Temperature, Dimmable, Memory Function, 1-Hour Timer |
| Base Material | Metal |
| Finish Type | Matte & Polished |
| Power Source | Corded Electric |
| Indoor/Outdoor Usage | Indoor |
| Included Components | Remote Control, 3 LED Bulbs |
Warranty and Support
Your OUTON LED Dimmable Tree Floor Lamp comes with a 1-year manufacturer's warranty. For any questions, technical assistance, or warranty claims, please contact OUTON customer service. We offer 24/7 customer service and 12-month support to ensure your satisfaction.
For further assistance, please visit the OUTON Store on Amazon.