BEXEVUE 47-inch Gaming Desk with Power Outlets and LED Lights User Manual

1. Important Safety Information

Always ensure the desk is properly anchored to the floor to prevent tipping. Do not overload the desk beyond its weight limit. Use the power outlets with caution and follow all safety guidelines for electrical equipment.

2. Product Overview

The BEXEVUE 47-inch Gaming Desk is designed for an ergonomic and functional gaming or workstation setup. Key features include integrated power outlets, LED lighting, a monitor stand, an X-frame for stability, and a headphone hook.

Figure 2.1: Fully assembled BEXEVUE 47-inch Gaming Desk.

3. Package Contents

Before beginning assembly, please verify that all parts listed below are present and undamaged. If any parts are missing or damaged, please contact customer support.

Figure 3.1: All components included in the BEXEVUE Gaming Desk package.

• Desktop Board (A)
• Table Legs (F, G, H)
• Monitor Stand Board (B)
• Drawer Components (C, D, E)
• Headphone Hook (9)
• Cup Holder (C)
• Power Outlet Strip (12)
• LED Light Strip (8)
• Assembly Hardware (Screws, Allen Wrench, etc.)

4. Setup and Assembly

For ease and safety, it is recommended that two people assemble this desk. Refer to the included instruction manual for detailed diagrams and steps.

4.1. Assembling the Desk Frame

1. Step 1: Attach Foot Pads. Attach the foot pads (10) to the bottom of table legs F, G, and H.
2. Step 2: Connect Frame Sections. Use screws (5) to connect parts M and F.
3. Step 3: Connect Crossbar. Use part L to connect G and F. Ensure the holes face the same direction as indicated in the manual.
4. Step 4: Attach Legs to Desktop. Turn over the desktop A board. Use screws (5) to install the legs to the desktop board. Pay attention to screw depth to avoid damage.
5. Step 5: Assemble Drawer Shelf. Use screws (6) to fix part D onto C.
6. Step 6: Secure Drawer Shelf. Use screws (6) to secure C & D between legs G & H.
7. Step 7: Install X-shaped Crossbar. Use screws (3) to install the X-shaped cross "N" between the desk legs F and G.

4.2. Installing Monitor Stand, Light Strip, and Power Outlet

1. Step 8: Install Monitor Stand Supports. Use screws (3) to install I part onto the monitor stand board B. Then use screws (5) to install J part onto the monitor stand board B.
2. Step 9: Secure LED Light Strip. Use the cable clamp (15) to secure the light strip (8) to the monitor stand board B. When installing the light LED strip, you can choose the direction of the light LED strip cable according to the position of the power outlet.
3. Step 10: Attach Monitor Stand to Desktop. Use the screw (5) to install the monitor stand onto the desktop.
4. Step 11: Secure Monitor Stand. Use screws (5) to fix the monitor stand onto the desktop.
5. Step 12: Install Power Outlet. Use screws (2) to install the power outlet in its designated position.

4.3. Installing Headphone Hook and Drawer

1. Step 13: Attach Headphone Hook. Use screw (4) to fix the hook (9) to the side of the desk.
2. Step 14: Assemble Drawer. Open the folded part E, place the partition inside, then use screws (1) to secure the drawer handle (11).
3. Step 15: Install Drawer Slides. Align the holes on Parts K with those on the desk legs and then install Parts K. Note the end of Part K with the bent part needs to face backward to prevent the drawer from sliding out.
4. Step 16: Insert Drawer. Put the drawer into the desk.

Congratulations! Your BEXEVUE Gaming Desk is now successfully assembled.

5. Operating Instructions

5.1. LED Lighting

The desk features integrated RGB LED strip lights. Use the included controller to adjust settings:

• Speed Control: Adjust the speed of dynamic lighting effects.
• Adjustable Brightness: Select from multiple brightness levels.
• 20 Static Colors: Choose from a wide range of solid colors.
• 21 Dynamic Modes: Explore various pre-programmed lighting patterns.
• Wireless Control: Operate the LED lights conveniently with the remote.

Figure 5.1: LED light strip features and wireless remote control.

5.2. Power Outlets

The desk includes an embedded power strip for convenient access to electricity without clutter. It features:

• 125V/12A 2AC Outlets: Standard AC power outlets.
• Type C Fast Charging 5V/3A USB: For rapid charging of compatible devices.
• 5ft Power Cord: Provides ample reach to a wall outlet.

Figure 5.2: Embedded power strip with AC and USB outlets.

6. Maintenance

• Cleaning: Wipe the desk surface with a soft, damp cloth. Avoid abrasive cleaners or harsh chemicals that may damage the finish.
• Hardware Check: Periodically check all screws and fasteners to ensure they are tight. Retighten if necessary to maintain stability.
• Cable Management: Keep cables organized using the provided cable management features to prevent tangles and damage.

7. Troubleshooting

• Desk Wobbles: Ensure all screws are securely tightened. Verify that the desk is placed on a level surface. Adjust foot pads if necessary.
• LED Lights Not Working: Check the power connection of the LED strip. Ensure the remote control batteries are functional.
• Power Outlets Not Functioning: Verify the main power cord is securely plugged into a working wall outlet. Check for any tripped circuit breakers.

8. Specifications

9. Warranty and Support

For warranty information and customer support, please refer to the warranty card included in your product packaging or visit the official BEXEVUE website. If you encounter any issues not covered in this manual, please contact our support team for assistance.