1. Introduction
Thank you for purchasing the Benzara Antoine King Size Bed. This manual provides detailed instructions for assembly, operation, maintenance, and troubleshooting to ensure safe and proper use of your new bed. Please read all instructions carefully before beginning assembly and retain this manual for future reference.
1.1 Safety Information
- Keep all parts and packaging materials away from children.
- Assemble the bed on a soft, clean surface to prevent scratches.
- Ensure all connections are securely tightened before use. Periodically check and re-tighten as necessary.
- Do not use power tools for assembly as this may overtighten or damage components.
- This bed requires a box spring for proper mattress support. Failure to use a box spring may void the warranty and compromise structural integrity.
- Maximum weight capacity: Refer to product specifications or contact customer support for specific weight capacity.
- California Proposition 65 Warning: This product can expose you to chemicals including Formaldehyde, which is known to the State of California to cause cancer. For more information go to www.P65Warnings.ca.gov.
2. Parts List
Before assembly, verify that all components are present and undamaged. If any parts are missing or damaged, do not proceed with assembly. Contact customer support for assistance.
- Headboard (1)
- Footboard (1)
- Side Rails (2)
- Support Slats (Quantity varies by design, typically 3-5)
- Center Support Legs (Quantity varies)
- Hardware Pack (Bolts, Washers, Nuts, Allen Wrench)
Image: All components of the Benzara Antoine King Size Bed laid out, including the ornate headboard, footboard, side rails, and hardware.
3. Assembly Instructions
Follow these steps carefully to assemble your Benzara Antoine King Size Bed. It is recommended to have two people for assembly.
- Step 1: Attach Side Rails to Headboard.
Align the side rails with the pre-drilled holes on the headboard. Insert bolts through the holes and secure with washers and nuts. Do not fully tighten yet.
Image: Side view of the bed, illustrating the connection of the side rail to the headboard.
- Step 2: Attach Side Rails to Footboard.
Repeat Step 1 for the footboard, connecting the other end of the side rails. Ensure the footboard is facing the correct direction. Once all connections are made, fully tighten all bolts using the provided Allen wrench.
Image: Side view of the bed, illustrating the connection of the side rail to the footboard.
- Step 3: Install Support Slats and Center Support Legs.
Place the support slats across the side rails, ensuring they are evenly spaced. Attach them using the provided screws if applicable. Install the center support legs to the middle of the bed frame, adjusting their height to ensure they firmly touch the floor and provide adequate support.
- Step 4: Final Inspection.
Double-check all bolts and connections to ensure they are tight and secure. The bed frame should be stable and level.
Image: Fully assembled Benzara Antoine King Size Bed.
4. Operating Instructions
4.1 Mattress and Box Spring Placement
This bed is designed to be used with a standard King Size mattress and a box spring. Place the box spring directly onto the support slats. Then, place your King Size mattress on top of the box spring.
4.2 Weight Distribution
Distribute weight evenly across the bed. Avoid concentrating heavy loads on a single point to prevent damage to the frame or slats.
5. Maintenance
5.1 Cleaning
- For the faux leather and fabric upholstery, gently wipe with a soft, damp cloth. Avoid harsh chemicals or abrasive cleaners.
- For the wooden and resin parts, dust regularly with a soft, dry cloth. For deeper cleaning, use a mild wood cleaner and polish as needed.
- Immediately blot any spills to prevent staining.
5.2 Regular Checks
Periodically (e.g., every 3-6 months) inspect all bolts and connections to ensure they remain tight. Re-tighten any loose hardware to maintain the bed's stability and safety.
6. Troubleshooting
| Problem | Possible Cause | Solution |
|---|---|---|
| Bed feels wobbly or unstable. | Loose bolts or uneven support legs. | Check and tighten all assembly bolts. Ensure center support legs are properly adjusted and firmly touching the floor. |
| Squeaking noises. | Loose connections or friction between parts. | Tighten all bolts. Apply a small amount of lubricant (e.g., silicone spray) to contact points if necessary, avoiding upholstery. |
| Mattress sags. | Missing or damaged box spring, or insufficient support slats. | Ensure a proper box spring is used. Verify all support slats are in place and undamaged. Contact customer support if slats are broken. |
7. Specifications
- Model: BM327540
- Size: King Size
- Product Dimensions: 94"L x 93"W x 79"H
- Item Weight: 291 pounds
- Material: Wood, Composite Wood, Poly Resin, Faux Leather and Fabric
- Color: Ivory, Pearl White and Gold
- Assembly Required: Yes
- Box Spring Required: Yes
- Special Features: Scratch Resistant, Spindles, Intricate Rococo inspired carvings, Padded and button-tufted headboard/footboard.
Image: Dimensional diagram of the Benzara Antoine King Size Bed.
8. Warranty and Customer Support
For warranty information, missing parts, or any questions regarding your Benzara Antoine King Size Bed, please contact the retailer or manufacturer directly. Refer to your purchase documentation for specific warranty terms and contact details.
Manufacturer: Benjara
UPC: 198288143912
9. Additional Resources
9.1 Brand Overview Video
Video: An overview of Benzara Woodland Imports, showcasing their commitment to handcrafted furniture and unique designs. This video provides insight into the brand's quality and style philosophy.