1. Introduction
Welcome to the Oricom UHF360R and UHF1400 Bundle Pack user manual. This comprehensive guide provides detailed instructions for the installation, operation, and maintenance of your new UHF CB radio communication system. This bundle is designed to provide reliable communication for various applications, from vehicle-mounted use to portable outdoor activities.
2. Package Contents
Your Oricom UHF360R & UHF1400 Bundle Pack includes the following components:
- Oricom UHF360R 5 Watt UHF CB Radio (Transceiver Unit)
- Controller Speaker Microphone with Instant Replay function
- 6.5dBi UHF CB Antenna
- Oricom UHF1400 1 Watt Handheld UHF CB Radio
- Mounting Hardware for UHF360R
- Antenna Coaxial Cable (4.5m)
3. Safety Information
Please read and understand all safety precautions before operating your Oricom UHF CB radios. Failure to do so may result in injury or damage to the equipment.
- Power Source: Ensure the correct voltage (12V DC for UHF360R) is used. Incorrect voltage can damage the unit.
- Antenna Placement: Mount the antenna in a location that provides optimal performance and is clear of obstructions. Avoid touching the antenna during transmission.
- Hearing Protection: Prolonged exposure to high volume levels may cause hearing damage. Adjust volume to a comfortable level.
- Explosive Environments: Do not operate the radio in environments with flammable gases or explosive materials.
- Water Exposure: While some components may be rugged, avoid direct exposure to water unless specified as waterproof.
- Servicing: Do not attempt to service the unit yourself. Refer all servicing to qualified personnel.
4. UHF360R 5 Watt UHF CB Radio (Fixed Unit)
4.1. Installation
The UHF360R is designed for vehicle installation, with its compact transceiver unit and all controls integrated into the speaker microphone.
- Transceiver Mounting: Select a secure, dry location within your vehicle for the compact transceiver unit. Ensure it is away from heat sources and does not obstruct vehicle operation. Use the provided mounting bracket and screws.
- Controller Speaker Microphone Connection: Connect the controller speaker microphone cable to the designated port on the transceiver unit. Ensure a secure connection.
- Power Connection: Connect the radio's power cable to a 12V DC power source in your vehicle. It is recommended to connect directly to the vehicle's battery or a fused accessory circuit to prevent voltage drops. Ensure correct polarity (red to positive, black to negative).
- Antenna Connection: Connect the 6.5dBi UHF CB antenna's coaxial cable to the antenna port on the transceiver unit. Ensure the connection is tight.
Figure 1: Oricom UHF360R transceiver unit and controller speaker microphone.
4.2. Operation
All primary controls for the UHF360R are conveniently located on the controller speaker microphone.
- Power On/Off: Press and hold the MODE button on the controller microphone to power the unit on or off.
- Channel Selection: Use the UP and DOWN arrow buttons to navigate through the 80 available UHF CB channels.
- Volume Control: Adjust the volume using the dedicated volume controls on the microphone. The integrated speaker in the controller mic works in conjunction with the transceiver speaker for clear audio.
- Instant Replay: The UHF360R features an Instant Replay function, allowing you to record and replay up to 10 minutes of transmissions. This ensures you don't miss any important communications. Refer to the full manual for specific button presses for this feature.
- Audio Equalizer: The unit includes an audio equalizer to adjust the audio output for certain frequencies, enhancing clarity.
Figure 2: Oricom UHF360R controller speaker microphone with green display, showing channel 80.
Figure 3: Oricom UHF360R controller speaker microphone with red display, showing channel 80.
Figure 4: A hand holding the Oricom UHF360R controller speaker microphone, demonstrating its ergonomic design.
5. UHF1400 1 Watt Handheld CB Radio
5.1. Operation
The UHF1400 is a portable 1 Watt handheld UHF CB radio, ideal for camping, hiking, and other outdoor activities.
- Power On/Off: Press and hold the power button to turn the radio on or off.
- Channel Selection: Use the UP/DOWN buttons to select your desired channel from the 80 available channels.
- Integrated LED Torch: The UHF1400 features a built-in LED torch for reliable lighting in dark environments. Activate it via the dedicated button (refer to the full manual for exact button location).
- Battery Management: The handheld unit operates on a rechargeable battery. Ensure the battery is fully charged before extended use. Refer to the separate UHF1400 manual for charging instructions and battery care.
Figure 5: Oricom UHF1400 1 Watt handheld UHF CB radio with antenna and display showing channel 80.
6. 6.5dBi UHF CB Antenna
The included 6.5dBi antenna is designed to provide optimal signal reception and transmission for your UHF CB radio system.
- High-Gain Performance: This antenna offers high-gain performance with low SWR (Standing Wave Ratio), ensuring efficient communication.
- Design: Features an elevated feed, a counter-balanced spring, and a solid black fiberglass whip for durability and sleek appearance.
- Cable: Comes with a 4.5-meter coaxial cable for flexible mounting options.
- Length: The antenna has an overall length of 830mm.
Figure 6: Oricom 6.5dBi UHF CB antenna, featuring a sleek black design.
7. Maintenance
Proper maintenance will ensure the longevity and optimal performance of your Oricom UHF CB radios.
- Cleaning: Use a soft, damp cloth to clean the exterior of the radio units and microphone. Do not use harsh chemicals or abrasive cleaners.
- Connections: Periodically check all cable connections (power, antenna, microphone) to ensure they are secure and free from corrosion.
- Antenna: Inspect the antenna for any physical damage or signs of wear. Ensure it is securely mounted.
- UHF1400 Battery: For the handheld unit, follow the battery care instructions provided in its specific manual to maximize battery life. Avoid overcharging or fully discharging the battery frequently.
8. Troubleshooting
If you encounter issues with your Oricom UHF CB radio bundle, refer to the following common troubleshooting steps:
| Problem | Possible Cause | Solution |
|---|---|---|
| No power to UHF360R | Loose power connection, blown fuse, vehicle battery issue. | Check power cable connections. Inspect the inline fuse. Verify vehicle battery voltage. |
| Poor reception/transmission | Antenna not connected, damaged antenna, obstructions, incorrect channel. | Ensure antenna is securely connected. Check antenna for damage. Move to an open area. Verify correct channel selection. |
| No audio from UHF360R | Volume too low, speaker mic not connected properly. | Increase volume. Ensure controller speaker microphone is fully plugged in. |
| UHF1400 not turning on | Battery depleted, battery not inserted correctly. | Recharge the battery. Ensure battery is correctly seated in the compartment. |
If problems persist after attempting these solutions, please contact Oricom customer support for further assistance.
9. Specifications
Key specifications for the Oricom UHF360R & UHF1400 Bundle Pack:
- Brand: ORICOM
- Model: UHF360RAH (Bundle Pack)
- Tuner Technology: UHF
- Number of Channels: 80 UHF CB Channels
- UHF360R Features: 5 Watt Max TX Power, Instant Replay (up to 10 mins recording), Integrated controls in microphone, Rugged design, Audio equalizer, 3.5mm external speaker jack.
- UHF1400 Features: 1 Watt TX Power, Integrated LED torch.
- Antenna: 6.5dBi High-gain, low SWR, elevated feed, counter-balanced spring, solid black fiberglass whip.
- Antenna Coax Cable: 4.5m
- Antenna Length: 830mm
- Talking Range Maximum: Up to 30 Kilometers (dependent on terrain and conditions)
- Material Type: Plastic
- Item Weight: 2.5 kg (total bundle)
- Package Dimensions: 40 x 30 x 12 cm
10. Warranty and Support
Your Oricom UHF360R & UHF1400 Bundle Pack comes with a standard return policy of 30 days from the date of purchase. For specific warranty terms and conditions, please refer to the documentation included with your product or visit the official Oricom website.
For technical support, troubleshooting assistance, or warranty claims, please contact Oricom customer service. Details can typically be found on the Oricom website or in the product packaging.
Always retain your proof of purchase for warranty purposes.
