Wawuwao SPL-1500W Haze Machine User Manual

1. Introduction

Thank you for choosing the Wawuwao SPL-1500W Haze Machine. This device is designed to produce continuous haze output, enhancing visual effects for various events such as stage performances, parties, Halloween, and weddings. It features multiple control options including DMX512, wireless remote, and manual buttons, offering flexibility for different setups. This manual provides essential information for safe operation, setup, and maintenance of your haze machine.

2. Safety Information

Please read all safety warnings carefully before operating the device.

• Burn Hazard: The fog outlet temperature is approximately 122°F (50°C). Hot air may spray out. Do not aim the fog outlet at people or flammable materials.
• Keep Out of Reach of Children: This machine is not a toy. Ensure children and unauthorized personnel do not operate or come into contact with the device during operation.
• Never Leave Unattended: Do not leave the machine unattended while in operation.
• Use Approved Liquid Only: Only use atomized liquid (haze fluid) recommended by the manufacturer. Operating the machine without liquid can cause serious damage.
• Ensure Nozzle Immersion: Before each use, ensure there is enough mist in the water tank and that the nozzle is fully immersed in the mist.
• Ventilation: Ensure the wind inlet is not blocked to prevent overheating.
• Flammable Substances: Never add flammable substances to the tank.
• Heat Sources: Keep this product away from heat sources such as fireplaces and radiators.

3. Package Contents

Verify that all items listed below are included in your package:

• 1x Wawuwao SPL-1500W Haze Machine
• 1x Wireless Remote Control
• 1x Power Cord (US Standard Plug)
• 1x Remote Control Signal Receiver
• 1x Signal Line (DMX cable)
• 1x English User Manual

4. Specifications

5. Setup Instructions

Follow these steps to set up your Wawuwao SPL-1500W Haze Machine:

1. Fill the Tank: Pour the atomized liquid (haze fluid, not included) into the tank. Ensure the nozzle is completely immersed in the liquid. Then, securely close the lid of the tank.

   

2. Connect Power and Receiver: Insert one end of the power cable into the fog machine's power input and the other end into a standard 110V 60Hz power supply socket. Insert the signal receiver for the wireless remote control. Turn on the power switch button.

   

   

3. Preheating: The machine will begin its first preheating cycle, which takes approximately 3 minutes. The LCD display screen will show the current status.
4. Adjust Spray Angle: You can adjust the spray angle by using the side knob on the machine.

6. Operating Instructions

Once preheating is complete, the machine is ready to continuously emit haze. You can control the haze output using one of the following methods:

6.1. Using the Wireless Remote Control

• Extend the antenna on the remote control for optimal signal reception.
• Press the appropriate button on the remote to activate or deactivate haze output. Refer to the remote control's specific button functions for detailed operation.

6.2. Using DMX512 Control

• Connect a DMX512 console to the DMX IN port on the haze machine using a signal line.
• Set the machine parameters on the DMX console to control haze output, duration, and other effects. Consult your DMX console's manual for specific programming instructions.

6.3. Using Manual Buttons

• The control panel on the machine features buttons for direct operation.
• Use these buttons to manually control functions such as haze output, timer settings, and volume pump. The LCD display will show the current status and settings.

7. Maintenance

Proper maintenance ensures the longevity and optimal performance of your haze machine:

• Cleaning: We recommend cleaning the fog machine with a dry cloth after each use.
• Storage: Keep the machine dry when storing it. Store in a cool, dry place away from direct sunlight and extreme temperatures.
• Fluid Management: Always ensure the tank is filled with appropriate haze fluid before operation. Never operate the machine with an empty tank.

8. Troubleshooting

If you encounter issues with your Wawuwao SPL-1500W Haze Machine, refer to the following common problems and solutions:

• No Haze Output:
  • Check if the power cord is securely connected and the power switch is ON.
  • Ensure the tank has enough haze fluid and the nozzle is fully immersed.
  • Verify that the machine has completed its preheating cycle (LCD display should indicate readiness).
  • If using remote control, check battery and ensure the signal receiver is properly connected.
  • If using DMX, check DMX cable connections and console settings.
• Weak Haze Output:
  • Ensure you are using high-quality, manufacturer-recommended haze fluid.
  • Check for any blockages in the nozzle or fluid line.
  • Ensure the machine has fully preheated.
• Machine Not Turning On:
  • Verify the power cord is plugged into a working outlet and the machine's power switch is in the 'ON' position.
  • Check the fuse if accessible (refer to the machine's exterior for fuse location, if any).

If the problem persists after attempting these solutions, please contact customer support.

9. Warranty and Support

Your Wawuwao SPL-1500W Haze Machine comes with a standard manufacturer's warranty. Please refer to the warranty card included in your package for specific terms and conditions, including the warranty period and coverage details.

For technical support, troubleshooting assistance, or warranty claims, please contact Wawuwao customer service through the retailer where you purchased the product or visit the official Wawuwao website for contact information.

When contacting support, please have your product model (SPL-1500W) and ASIN (B0F13GD8KC) ready.