YuanLey 6-Port 2.5G/10G Unmanaged Ethernet Network Switch User Manual

1. Introduction

This manual provides detailed instructions for the installation, operation, and maintenance of your YuanLey 6-Port 2.5G/10G Unmanaged Ethernet Network Switch. This high-performance switch is designed to enhance your network with flexible high-speed connectivity, featuring 4x 2.5GbE RJ45 ports and 2x 10Gbps RJ45 ports. It is suitable for various applications, including home networks, small offices, and multimedia environments requiring fast and reliable data transfer.

2. Product Overview

2.1 Key Features

• High-Performance Connectivity: Equipped with 4x 2.5GbE RJ45 ports and 2x 10Gbps RJ45 ports for flexible high-speed networking.
• Blazing-Fast Data Throughput: Non-blocking switching capacity of up to 60Gbps for efficient data transfer, supporting 4K/8K streaming and large file transfers.
• One-Key VLAN: Simple VLAN mode for network segmentation, enhancing security and minimizing broadcast storms.
• Silent & Reliable Operation: Fanless metal housing and passive cooling design ensure quiet and stable performance.
• Versatile Deployment: Supports both desktop and wall-mounted installations.
• Energy Efficient: Low power consumption, less than 2W standby power.
• Robust Design: Supports 6KV lightning protection and operates in temperatures from -10°C to 50°C.

2.2 Package Contents

Please check the package contents carefully. If any item is missing or damaged, please contact your vendor.

• YuanLey 6-Port 2.5G/10G Unmanaged Network Switch
• Power Adapter
• User Manual (this document)

2.3 Physical Layout and LED Indicators

Familiarize yourself with the switch's ports and LED indicators for proper operation and status monitoring.

Figure 1: Front and Rear Panel Layout of the YuanLey 6-Port 2.5G/10G Unmanaged Ethernet Network Switch.

This image displays the front panel with 4x 2.5Gbps ports (labeled 1-4) and 2x 10G ports (labeled 5-6), along with their respective LED indicators. The rear panel shows the DC Input Port (12V1.0A) and the S&V Dip Switch for VLAN mode selection. The PWR LED indicates power status (On: Powered on, Off: Powered off). Port LEDs indicate connection speed (Orange: 2.5Gbps or 10Gbps, Green: 10/100/1000Mbps).

• PWR (Power) LED:
  • On: Device is powered on.
  • Off: Device is powered off.
• Port LEDs (1-6):
  • Orange: Indicates a 2.5Gbps connection (for ports 1-4) or a 10Gbps connection (for ports 5-6).
  • Green: Indicates a 10/100/1000Mbps connection.
• DC Input Port (12V1.0A): Connect the provided power adapter here.
• S&V Dip Switch: Used to toggle between Standard Mode (S) and VLAN Mode (V). Refer to Section 4.2 for details.

3. Setup

The YuanLey 6-Port 2.5G/10G Unmanaged Ethernet Network Switch is designed for plug-and-play operation, requiring no complex configuration.

1. Unpack the Switch: Carefully remove the switch and its accessories from the packaging.
2. Choose a Location: Place the switch on a stable, flat surface or mount it to a wall using appropriate hardware (not included). Ensure adequate ventilation around the device. Avoid placing it near heat sources or in direct sunlight.
3. Connect Network Devices:
   • Connect your 2.5Gbps devices (e.g., NAS, gaming PCs, access points) to ports 1-4 using standard Ethernet cables.
   • Connect your 10Gbps devices (e.g., servers, high-speed workstations) or your main network uplink to ports 5-6 using standard Ethernet cables.
4. Connect Power: Connect the provided power adapter to the DC Input Port on the rear of the switch, then plug the adapter into a standard electrical outlet. The PWR LED will illuminate, indicating the switch is powered on.
5. Verify Connections: Check the LED indicators for each connected port. An illuminated LED (Green or Orange) indicates a successful link. The color indicates the connection speed as described in Section 2.3.

Figure 2: Typical Application Scenario for the Network Switch.

This image illustrates how the switch can be integrated into a network, connecting high-speed devices such as a 2.5G NAS, 2.5G Gaming PC, and a WiFi 6 Router, leveraging its 2.5Gbps and 10Gbps ports for optimal performance.

4. Operating Instructions

4.1 Basic Operation (Plug and Play)

Once powered on and connected, the switch operates automatically. It is an unmanaged switch, meaning it requires no software configuration. Devices connected to the switch will automatically negotiate the highest possible speed supported by both the device and the switch port (10/100/1000Mbps, 2.5Gbps, or 10Gbps).

The switch supports full-duplex operation and auto MDI/MDIX, eliminating the need for crossover cables.

4.2 VLAN Mode Operation

The switch features a physical S&V Dip Switch on the rear panel to enable or disable VLAN mode. This allows for simple network segmentation without complex software setup.

• Standard Mode (S): When the dip switch is set to 'S', all ports (1-6) can communicate with each other freely. This is the default mode for a typical unmanaged switch.
• VLAN Mode (V): When the dip switch is set to 'V', ports 1-4 are isolated from each other. Each of these ports can only communicate with the 10Gbps uplink ports (ports 5 and 6). This mode is ideal for scenarios where you want to isolate devices connected to ports 1-4 (e.g., IP cameras, multiple access points) while allowing them to access a central server or router connected to ports 5 or 6. This enhances security and reduces broadcast traffic within the isolated segments.

Important: To change the VLAN mode, it is recommended to power off the switch first, adjust the dip switch, and then power the switch back on.

5. Maintenance

The YuanLey switch is designed for reliable, maintenance-free operation. Follow these guidelines to ensure its longevity:

• Cleaning: Use a soft, dry cloth to clean the exterior of the switch. Do not use liquid or aerosol cleaners.
• Ventilation: Ensure that the ventilation holes are not blocked. Although fanless, proper airflow helps dissipate heat.
• Environment: Operate the switch within the specified temperature and humidity ranges (-10°C to 50°C). Avoid extreme conditions.
• Power Supply: Use only the provided power adapter. Using an incorrect adapter may damage the device.

6. Troubleshooting

If you encounter issues with your switch, please refer to the following common problems and solutions:

7. Specifications

Figure 3: Dimensions of the Network Switch.

This image provides a visual representation of the switch's compact size, highlighting its suitability for various installation environments, including wall mounting.

8. Warranty and Support

YuanLey products are designed for reliability and performance. For warranty information, technical support, or customer service inquiries, please refer to the warranty card included with your product or visit the official YuanLey website. You can also contact your point of purchase for assistance.

For the latest product information and support resources, please visit: YuanLey Official Store on Amazon