Livpure Allura Prime Water Purifier Instruction Manual

1. Introduction

The Livpure Allura Prime Water Purifier is designed to provide safe, clean, and healthy drinking water through its advanced 10-stage purification process. This manual provides essential information for the proper installation, operation, and maintenance of your water purifier to ensure optimal performance and longevity.

2. Key Features

• 10-Stage Advanced Purification: Incorporates RO (Reverse Osmosis), UV (Ultraviolet), UF (Ultrafiltration), Copper, and Alkaline technologies for comprehensive water treatment.
• Super Sediment Filter: Effectively removes fine particles and sediments, ensuring cleaner water.
• Copper Infusion: Enriches water with the natural goodness of copper.
• Alkaliser: Balances the water's pH level for improved hydration and health benefits.
• In-Tank UV Sterilisation: Provides continuous protection against harmful microorganisms in the stored water.
• 7-Liter Storage Capacity: Ensures an ample supply of purified water is always available.
• Smart LED Indicators: Provides clear status updates on purification, tank level, and other operational aspects.

Figure 2.1: Overview of key features including Copper Infusion, Storage Capacity, and Water Status Indication.

Figure 2.2: Detailed diagram of the 10-stage advanced purification process.

3. Setup and Installation

The Livpure Allura Prime Water Purifier is designed for wall-mount installation. An installation kit is included with the product. Professional installation is recommended to ensure proper setup and functionality.

3.1 Pre-Installation Checks

• Ensure the installation location is near a water source and a power outlet.
• Verify that the water pressure is within the recommended range for optimal performance.
• Check the raw water TDS (Total Dissolved Solids) level. This model supports a maximum TDS level of 500 PPM. If your TDS is higher, a pre-filter may be required (not included).

3.2 Wall Mounting

The unit should be securely mounted on a sturdy wall surface. Refer to the detailed instructions provided in the physical installation guide for precise measurements and mounting procedures.

3.3 Water and Power Connections

• Connect the water inlet to the raw water supply.
• Connect the drain line for rejected water.
• Plug the power cord into a suitable electrical outlet. The purifier operates on ELECTRIC power.

Figure 3.1: Product dimensions for installation planning.

4. Operation

Operating your Livpure Allura Prime Water Purifier is straightforward. The smart LED indicators provide real-time feedback on its status.

4.1 Power On/Off

Press the power button on the control panel to turn the purifier on or off. The power indicator will illuminate when the unit is active.

4.2 Water Dispensing

Place a glass or container under the water dispenser tap and press the water dispensing button. The purifier will dispense purified water until the button is released or the tank is empty.

4.3 Understanding LED Indicators

• Power Indicator: Shows if the unit is powered on.
• Purification Status: Indicates when the purification process is active.
• Tank Full Indicator: Illuminates when the 7-liter storage tank is full.
• Service/Filter Change Indicator: Alerts you when maintenance or filter replacement is due.

Figure 4.1: Control panel with smart LED indicators.

5. Maintenance

Regular maintenance is crucial for the efficient operation and longevity of your water purifier. The Livpure Allura Prime comes with a 24-month free maintenance service warranty, covering filter changes and RO membrane replacement.

5.1 Filter Replacement

The purifier's filters and RO membrane require periodic replacement. The service/filter change indicator will alert you when it's time for replacement. Contact Livpure customer support to schedule your free maintenance service.

5.2 Cleaning the Exterior

Wipe the exterior of the purifier with a soft, damp cloth. Do not use harsh chemicals or abrasive cleaners.

5.3 Tank Cleaning

While the in-tank UV sterilisation helps keep the stored water protected, periodic cleaning of the storage tank by a service technician is recommended.

Figure 5.1: Information regarding the 24-month free maintenance service.

6. Troubleshooting

If you encounter any issues with your Livpure Allura Prime Water Purifier, refer to the following common troubleshooting steps. For persistent problems, contact customer support.

6.1 No Water Dispensing

• Check if the power is on and the power indicator is lit.
• Ensure the water supply valve is open.
• Verify that the storage tank is not empty.

6.2 Slow Water Flow

• Check if the filters are due for replacement (indicated by the service light).
• Ensure adequate water pressure from the main supply.

6.3 Unusual Noise

Some operational noise during purification is normal. If you hear loud or unusual noises, contact customer support.

7. Specifications

8. Warranty and Support

Your Livpure Allura Prime Water Purifier comes with a comprehensive 24-month free maintenance service warranty. This includes all necessary filter changes and RO membrane replacements during the warranty period, ensuring peace of mind and hassle-free operation.

8.1 Contacting Support

For any service requests, technical assistance, or warranty claims, please contact Livpure customer support through their official channels. Refer to the product packaging or Livpure's official website for contact details.

9. Product Videos

9.1 Livpure Allura Prime Overview

Video 9.1: A comprehensive overview of the Livpure Allura Prime Water Purifier, highlighting its features and benefits.

9.2 Livpure Allura Prime Features Highlight

Video 9.2: A short preview video showcasing the key features of the Livpure Allura Prime Water Purifier, including its 10-stage purification and maintenance-free service.