HOMIDEC 55cm Tall Bedside Table (Model yyh25031013) Instruction Manual

Introduction

Thank you for choosing the HOMIDEC 55cm Tall Bedside Table. This manual provides essential information for the safe assembly, operation, and maintenance of your new furniture. Please read these instructions carefully before assembly and retain them for future reference.

Image: The HOMIDEC 55cm Tall Bedside Table, featuring a white finish, two fabric drawers, and a sturdy metal frame. A lamp and an alarm clock are placed on its top surface, demonstrating its utility as a bedside companion.

Image: The HOMIDEC bedside table positioned beside a bed, illustrating its functional integration into a bedroom environment.

Image: The HOMIDEC bedside table serving as a versatile side table next to a sofa in a living room, showcasing its adaptability to different home settings.

Safety Information

• Ensure all components are present and undamaged before assembly. Do not proceed with assembly if any parts are missing or damaged.
• Assemble the unit on a soft, clean surface to prevent scratches.
• Keep small parts away from children during assembly to avoid choking hazards.
• Do not overload the drawers or the top surface. Refer to the specifications for maximum weight recommendations.
• Regularly check all fasteners to ensure they remain tight.
• This product is designed for indoor use only.

Package Contents

Before beginning assembly, please verify that all the following components are included in your package:

• Top Wooden Panel (1)
• Metal Frame Components (various pieces for legs and supports)
• Fabric Drawers (2)
• Drawer Handles (2)
• Adjustable Feet (4)
• Assembly Hardware (screws, bolts, Allen wrench, etc.)
• Instruction Manual (this document)

Image: A diagram illustrating the overall dimensions of the bedside table (42cm W x 30cm D x 55cm H) and the individual fabric drawers (37.5cm W x 30cm D x 21cm H), along with a weight capacity indicator for the drawer (8kg).

Setup and Assembly Instructions

Follow these steps to assemble your HOMIDEC Bedside Table. It is recommended to have a clear, flat surface for assembly.

1. Unpack Components: Carefully remove all parts from the packaging and lay them out on a soft, clean surface to prevent scratches. Verify all parts are present against the package contents list.
2. Assemble Metal Frame: Connect the metal frame components using the provided hardware. Ensure all connections are secure but do not fully tighten screws until the frame is completely assembled.
3. Attach Top Panel: Secure the wooden top panel to the assembled metal frame using the designated screws.
4. Install Adjustable Feet: Screw the four adjustable feet into the bottom of the metal frame legs. These can be adjusted later to level the table.
5. Prepare Fabric Drawers: Unfold the fabric drawers. Insert the bottom panel into each drawer to give it shape and stability.
6. Attach Drawer Handles: Secure the handles to the front of each fabric drawer.
7. Insert Drawers: Slide the assembled fabric drawers into their respective slots within the metal frame.
8. Final Tightening: Once the entire unit is assembled, go back and fully tighten all screws and fasteners.

Image: This image emphasizes the straightforward assembly process, noting that no drilling or glue is required. It also highlights the absence of formaldehyde and chemical odors, promoting a safer and easier setup experience.

Operating Instructions

Using the Drawers

The HOMIDEC Bedside Table features two spacious fabric drawers for organized storage. To open, gently pull the handle. To close, push the drawer back into the frame until it is fully seated.

• Avoid forcing the drawers if they feel stuck. Ensure nothing is obstructing their path.
• Distribute weight evenly within the drawers to prevent strain on the fabric and frame.
• The maximum weight capacity for each drawer is approximately 8 kg (17.6 lbs).

Image: A detailed view of an open fabric drawer, demonstrating its ample storage capacity for various items such as remote controls, charging cables, and books. Dimensions of the drawer are also indicated.

Adjusting for Stability

Your bedside table is equipped with adjustable feet to ensure stability on uneven floors. To adjust:

1. Place the table in its desired location.
2. If the table wobbles, identify the leg(s) that need adjustment.
3. Gently lift the corner of the table slightly and rotate the adjustable foot clockwise to shorten it or counter-clockwise to lengthen it.
4. Repeat until the table is stable and level.

Maintenance and Care

Cleaning the Surfaces

• Wooden Top: Wipe the wooden surface with a soft, damp cloth. For stubborn marks, a mild, non-abrasive cleaner can be used, followed by drying with a clean cloth. The surface is water-resistant, but spills should be wiped promptly.
• Metal Frame: Clean the metal frame with a soft, dry or slightly damp cloth. Avoid harsh chemicals or abrasive cleaners that could damage the finish.
• Fabric Drawers: Spot clean fabric drawers with a mild detergent and a damp cloth. Allow to air dry completely. Do not machine wash or tumble dry.

Image: This image highlights the quality materials used in the bedside table, specifically showcasing the water-resistant and scratch-resistant wooden top surface and the rust-proof, durable, and stable steel frame.

General Care

• Avoid placing hot items directly on the wooden surface. Use coasters if necessary.
• Keep the table away from direct sunlight and extreme temperature changes to prevent material degradation.
• Periodically check all screws and fasteners to ensure they are tight. Retighten if necessary.

Troubleshooting

Specifications

• Brand: HOMIDEC
• Model Number: yyh25031013
• Color: White
• Product Dimensions (D x W x H): 11.81" x 16.54" x 21.65" (30cm x 42cm x 55cm)
• Item Weight: 4.2 Kilograms (9.26 lbs)
• Maximum Weight Recommendation (Top Surface): Approximately 20 Kilograms (44 lbs)
• Maximum Weight Recommendation (Each Drawer): Approximately 8 Kilograms (17.6 lbs)
• Number of Drawers: 2
• Drawer Material: Non-woven fabric, Synthetic Leather
• Frame Material: Metal (Steel)
• Top Surface Material: Particleboard (Wood)
• Features: Adjustable feet, Water-resistant wooden surface, Rust-proof metal frame, Anti-collision corners.

Image: This diagram illustrates the ergonomic height of the bedside table, showing it positioned next to a bed. The table's height of 55cm (21.5 inches) is designed to align well with most bed heights, such as the depicted 56cm (22 inches) bed, for convenient access.

Image: A close-up demonstrating the high-quality fabric used for the drawers, highlighting its stable construction and the blend of synthetic leather and non-woven materials.

Warranty and Support

For any questions, concerns, or assistance with your HOMIDEC product, please refer to your purchase documentation or contact HOMIDEC customer support through the retailer where the product was purchased. Please have your model number (yyh25031013) and purchase date ready when contacting support.

For more information about HOMIDEC products, you may visit the official HOMIDEC store: HOMIDEC Store on Amazon.