Teamson Home FT0424RR
Contents
Teamson Home 38.5" Faux Slate Outdoor LED Waterfall Fountain
Model: FT0424RR
Introduction
Thank you for purchasing the Teamson Home 38.5" Faux Slate Outdoor LED Waterfall Fountain. This manual provides essential information for the safe assembly, operation, and maintenance of your new fountain. Please read all instructions carefully before use and retain this manual for future reference.
This fountain features a contemporary design with a red rock frame and textured facade, illuminated by LED lights. Water gently cascades into a pebbled base, creating a soothing ambiance for outdoor spaces.
Important Safety Information
WARNING: To reduce the risk of electric shock, fire, or injury, always follow these basic safety precautions.
- Ensure the fountain is placed on a stable, level surface to prevent tipping.
- Always unplug the fountain from the electrical outlet before performing any maintenance, cleaning, or when adding/removing water.
- Do not operate the fountain if the power cord or pump is damaged. Contact customer support for replacement parts.
- Keep the power cord away from heat sources, sharp edges, and moving parts.
- This product is designed for outdoor use. Ensure the electrical outlet is a grounded outdoor outlet and protected by a Ground Fault Circuit Interrupter (GFCI).
- Do not allow children or pets to play with the fountain unsupervised.
- Do not attempt to disassemble or repair the pump or electrical components yourself. Refer all servicing to qualified personnel.
- During freezing temperatures, drain all water from the fountain and store it indoors to prevent damage.
Package Contents
Please check to ensure all parts are present before assembly:
- Fountain Unit (Main body with faux slate waterfall)
- Water Pump with LED lights
- Power Adapter
- Pebbles (for base decoration)
- Instruction Manual

Image: The complete Teamson Home 38.5" Faux Slate Outdoor LED Waterfall Fountain, showcasing its design and illuminated features.
Setup and Assembly
Follow these steps to assemble your fountain:
- Unpack Components: Carefully remove all parts from the packaging and place them on a soft, clean surface to avoid scratches.
- Position the Fountain: Place the fountain unit on a firm, level surface in your desired outdoor location. Ensure it is close enough to a grounded outdoor electrical outlet.

Image: The fountain positioned in an outdoor garden, demonstrating suitable placement.
- Install the Pump: Locate the water pump. Connect the tubing from the fountain to the pump's outlet. Ensure a secure connection.
- Connect LED Lights: If the LED lights are separate from the pump, connect their wiring to the corresponding connectors. Ensure all electrical connections are dry and secure.

Image: A detailed view highlighting the LED lights, faux slate texture, red rock finish, and the pebble base of the fountain.
- Add Water: Fill the fountain reservoir with distilled water until the pump is fully submerged. Do not overfill. The water capacity is approximately 1.98 gallons.
- Arrange Pebbles: Carefully place the provided pebbles into the base of the fountain around the pump. This adds to the aesthetic and helps stabilize the pump.

Image: A close-up shot of the fountain's base, showing the decorative pebbles and the integrated LED lights illuminating the water.
- Plug In: Once assembly is complete and the reservoir is filled, plug the power adapter into a grounded outdoor electrical outlet.
Operation
Operating your Teamson Home fountain is straightforward:
- Power On/Off: The fountain will start operating once plugged into a live electrical outlet. Unplug to turn off.
- Water Level: Regularly check the water level. Due to evaporation, you will need to add water periodically to ensure the pump remains fully submerged. Operating the pump without sufficient water can cause damage.
- Adjustable Water Flow: The pump includes an adjustable water control unit. You can regulate the water flow to your preference. Refer to the pump's specific instructions for adjustment.
- LED Lights: The built-in LED lights will illuminate when the fountain is powered on, enhancing the visual appeal.

Image: Diagram illustrating the dimensions of the fountain: 38.58 inches (97.99 cm) in height, 13.39 inches (34.01 cm) in length, and 8.66 inches (22 cm) in width.
Maintenance
Proper maintenance will extend the life of your fountain:
- Regular Cleaning: Clean the fountain and pump regularly (e.g., bi-weekly or monthly) to prevent mineral buildup, algae, and slime. Unplug the fountain, drain the water, and clean all surfaces with a soft brush and mild soap. Rinse thoroughly.
- Pump Cleaning: Disassemble the pump according to its instructions and clean any debris from the impeller and housing. This ensures optimal water flow.
- Water Quality: Use distilled water to minimize mineral deposits. Consider adding a fountain algaecide or clarifier (follow product instructions) to prevent algae growth.
- Winterization: Before the first freeze, drain all water from the fountain. Clean and dry the unit completely. Store the fountain and pump indoors in a dry, frost-free location. Do not allow water to freeze in the fountain, as this can cause severe damage.

Image: The fountain glowing at night on an outdoor patio, demonstrating its visual effect in low light conditions.
Troubleshooting
If your fountain is not operating correctly, refer to the following common issues and solutions:
| Problem | Possible Cause | Solution |
|---|---|---|
| Fountain does not operate. |
|
|
| Water flow is weak or inconsistent. |
|
|
| Excessive splashing. |
|
|
| LED lights not working. |
|
|
Specifications
- Model Number: FT0424RR
- Dimensions (L x W x H): 13.39" x 8.66" x 38.58" (34.01 cm x 22 cm x 97.99 cm)
- Water Capacity: 1.98 gallons
- Material: Polyresin
- Power Source: Corded Electric
- Special Feature: Weather Resistant, Built-in LED Lights
- Item Weight: 13.8 Pounds (6.26 kg)
- UPC: 810136543872
Warranty and Support
Teamson Home products are manufactured with quality and care. For warranty information, replacement parts, or technical support, please contact Teamson Home customer service. Please have your model number (FT0424RR) and proof of purchase available when contacting support.
Contact information can typically be found on the manufacturer's website or on the product packaging.
Ask a question about this manual
Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.